Search Results

Having, by now, introduced several new vehicles that comply with FMVSS 202a, manufacturers are reporting an increased number of complaints from consumers who find that the head restraint is too close; negatively affecting their posture. It is speculated that one of the reasons that head restraints meeting the new requirement are problematic is that the FMVSS backset measurement is performed at a back angle that is more reclined than the back angle most drivers choose and the back angle at which the seat / vehicle was designed. The objective of this paper is to confirm this hypothesis and elaborate on implications for regulatory compliance in FMVSS 202a.

Torque controls for the engine and electric motors in a Powersplit HEV are keys to the success of balancing fuel economy, driveability, and battery power control. The electric variable transmission (EVT) offers an opportunity to let the engine operate at system-optimal fuel efficient points independently of any load. Existing work shows such a benefit can be realized through a decentralized control structure that translates the driver inputs to independent engine torque and speed control. However, our study shows that the decentralized control structures have a fundamental limitation that arises from the nonminimum phase (NMP) zero in the transfer function from the driver power command to the generator torque change rate, and thus not only is it difficult to obtain smooth generator torque but also it can cause violations on battery power limits during transients. Additionally, it adversely affects the driveability due to the generator torque transients reflected at the ring gear.

The Reverse Braking Assist (RBA) feature is designed to automatically activate full braking in a backing vehicle. When this feature activates, a backing vehicle is suddenly stopped or may slide to a stop. During this process, an understanding of the driver's behavior may be useful in the design of an appropriate human-machine-interface (HMI) for the RBA. Several experimental studies were done to examine driver behavior in response to an unexpected and automatic braking event while backing [1]. Two of these studies are reported in this paper. A 7-passenger Crossover Utility Vehicle was fitted with a rear-view camera, a center-stack mounted LCD screen, and ancillary recording devices. In the first study, an object was suddenly placed in the path of a backing vehicle. The backing vehicle came to a sudden and complete stop. The visual image of the backing path on the LCD prominently showed that an obstacle was present in the backing path of the vehicle.

The “Information Age” and the growth of electronics on vehicles are driving forces behind the “personalized” vehicle. The vision is a responsive vehicle where the powertrain, ride, instrumentation and interior can be customized by the driver. A strategy to personalize the vehicle is presented; first, through market research to identify new features, and second, ergonomic design for easy to use displays and controls. Changes in society that are driving forces are discussed along with the counter balancing need for ergonomic design. Approaches to personalization, ergonomic principles, and technologies are presented.

The safety and comfort aspects of passenger cars are significant sales argument and have become a topic of rising importance during the development process of a new car. The objective of this study is to compare the performance of several current model vehicles, highlight the drawbacks of current defrosting/demisting systems and point the way to improved passive mechanisms. The investigation is experimental. The experiments are carried out using full-scale current vehicle models. The results show that the current designs of the defroster nozzle give maximum airflow rates in the vicinity of the lower part of the windshield, which decrease gradually towards the upper parts of the windshield. This hinders and limits the vision of the driver, particularly at the top of the windshield, which can be uncomfortable and indeed dangerous.

In the 1999 Supplemental Notice for Proposed Rulemaking (SNPRM) for Advanced Airbags, the National Highway Traffic Safety Administration (NHTSA) sought comments on the maximum speed at which the high-speed, unbelted occupant test suite will be conducted, i.e., 48 kph vs. 40 kph. To help address this question, an analysis of constraints was performed via extensive mathematical modeling of a theoretical restraint system. First, math models (correlated with several existing physical tests) were used to predict the occupant responses associated with 336 different theoretical dual-stage driver airbag designs subjected to six specific Regulated and non-Regulated tests.

The intent of this paper is to summarize the work of the V8 power plant intake manifold radiated noise study. In a particular V8 engine application, customer satisfaction feedback provided observations of existing unpleasant noise at the driver's ear. A comprehensive analysis of customer data indicated that a range from 500 to 800 Hz suggests a potential improvement in noise reduction at the driver's ear. In this study the noise source was determined using various accelerometers located throughout the valley of the engine and intake manifold. The overall surface velocity of the engine valley was ranked with respect to the overall surface velocity of the intake manifold. An intensity mapping technique was also used to determine the major component noise contribution. In order to validate the experimental findings, a series of analysis was also conducted. The analysis model included not only the plastic intake manifold, but also the whole powertrain.

The evaluation of the performance benefits of solar load reducing glazings using production vehicles is key to the establishment of the product cost/benefit ratio. Climatic windtunnels normally used to evaluate heat gain and vehicle cooldown can not provide true solar simulation. Comparative testing using a test car and a control vehicle must therefore be conducted outside in uncontrollable ambient conditions. The subject paper deals with the development of a testing methodology capable of quantifying thermal performance differences, as low as 5%, resulting from component differences, including glazings. The procedure described includes the use of B & K Thermal Comfort Meters to standardize the refrigeration system performance and to evaluate the rate of vehicle interior cooldown. Data taken during summer test programs in the Southwest for evaluation of heat absorbing glazings will be reviewed.

The vehicular illumination system has undergone considerable technological advances in recent decades such as the use of a Light Emitting Diode (LED) and HID (high intensity discharge) lamps. However, the challenges to develop a global beam pattern for ECE markets have been quite difficult due to different needs in different regions. Global programs have to deal with the differences among costumer needs and desires. This paper shows the challenges to understand the different needs and highlights the opportunities for the future to improve road illumination and the driver's safety adopting simulations and different road scenarios.

The objectives of this study were a) to determine how expert judges categorized valid Integrated Vehicle-Based Safety Systems (IVBSS) Forward Collision Warning (FCW) events from review of naturalistic driving data; and b) to determine how consistent these categorizations were across the judges working in pairs. FCW event data were gathered from 108 drivers who drove instrumented vehicles for 6 weeks each. The data included video of the driver and road scene ahead, beside, and behind the vehicle; audio of the FCW alert onset; and engineering data such as speed and braking applications. Six automotive safety experts examined 197 ‘valid’ (i.e., conditions met design intent) FCW events and categorized each according to a taxonomy of primary contributing factors. Results indicated that of these valid FCW events, between 55% and 73% could be considered ‘nuisance alerts’ by the driver.

This paper describes the design and development of the Ford Driving Simulator. The simulator is a fixed-base device which provides real-time, interactive feedback to the driver through a combination of visual, auditory and tactile cues. The system is comprised of a modular buck, 150° field-of-view visual scene, a steering torque controller, high fidelity dynamics models, and an interactive experimenters station. Data acquisition systems have been developed to capture a broad spectrum of driver performance metrics.

A study was conducted to rank 34 ergonomic characteristics of automobiles by their degree of importance to older and younger drivers. The older drivers were students in AARP driver education classes; the younger drivers were students in university classes. Three geographic locations were sampled. The primary variable analyzed was age, but geographic location, gender, driving experience, and use of glasses were also investigated. Of the characteristics that were found to be of more than average importance to older drivers, seven were appreciably more important to older drivers than to younger drivers with the “control of glare light” being the most dominant.

A method for communication linking the vehicle user and the lighting engineer has been developed to improve the headlight beam pattern development process. A technique called the semantic differential has been used to quantify the user's perception on a large number of attributes of the beam pattern. The basis of the technique utilizes descriptive words used by both drivers and engineers to characterize headlight beam patterns. Beam pattern evaluations conducted in a series of dynamic drive situations formed the initial data base. Subsequent evaluations using this technique have facilitated close and quick interaction between the customer and the engineer during the development of headlight beam patterns.

Through Frame and Suspension Tuning (FAST) you can identify suspension and frame Set-ups in the lab with out risk to the car or driver. For on track verification the number of Set-ups can be reduced from an unlimited number to 2 or 3 and then optimized on the track, rather than developed on the track. This method can be used with all forms of racing. It has been applied to Indy, GT, Winston Cup, and Trans Am cars. Through the use of a road simulator we are able to evaluate and improve the frame and suspension dynamics in a laboratory. This paper will focus on the first step in the tuning process, frame tuning. If the frame is not tuned for the input energy conditions it can become an uncontrolled suspension component. The first step is to identify the frame dynamic characteristics. Operational deform shapes are measured to identify local and global motion. The frames are modified to optimize the response for the type of race track.

In vehicle crash tests, an unbelted occupant's kinetic energy is absorbed by the restraints such as an air bag and/or knee bolster and by the vehicle structure during occupant ride-down with the deforming structure. Both the restraint energy absorbed by the restraints and the ride-down energy absorbed by the structure through restraint coupling were studied in time and displacement domains using crash test data and a simple vehicle-occupant model. Using the vehicle and occupant accelerometers and/or load cell data from the 31 mph barrier crash tests, the restraint and ride-down energy components were computed for the lower extremity, such as the femur, for the light truck and passenger car respectively.

Locations of key body segments of Hybrid III dummies used in FMVSS 208 compliance tests and NCAP tests were measured and subjected to statistical analysis. Mean clearance dimensions and their standard deviations for selected body segments of driver and passenger occupants with respect to selected vehicle surfaces were determined for several classes of vehicles. These occupant locations were then investigated for correlation with impact responses measured in crash tests and by using a three dimensional human-dummy mathematical model in comparable settings. Based on these data, the importance of some of the clearance dimensions between the dummy and the vehicle surfaces was determined. The study also compares observed Hybrid III dummy positions within selected vehicles with real world occupant positions reported in published literature.

One of the major goals in the design of the new Ford Aeromax and Louisville heavy truck product line was to achieve competitive leadership in visibility. Market research found that visibility was an important issue to the heavy truck driver. Visibility is defined as both direct and indirect (i.e., the driver's ability to see with and without the use of supplemental vision devices such as mirrors) and both interior and exterior. The scope of this paper includes the work which was accomplished in evaluating direct and indirect exterior visibility and the resulting vehicle design which achieved Ford's leadership goals. Poor weather visibility and interior vision are beyond the scope of this paper. Polar Plots were the method of choice in the Aeromax/Louisville visibility studies. Industry acceptance of these techniques has been established in the recent approval of SAE J1750, “Evaluating the Truck Driver's Viewing Environment”.

The air flow distribution in a car from the panel registers to the driver or passenger is largely influenced by the register design. We have undertaken a study using both experimental and numerical techniques to understand the parameters that influence register performance. In particular, we set out to identify the register characteristics that have the greatest effect on the size of the plume. The idea is that once an occupant has reached thermal comfort, particularly after cool down, the less direct impingement of air the occupant feels, the greater his/her comfort.

Low reliability and cumbersome calibration procedures for commercially available drill breakage detection system were the drivers for the development of a robust system which utilizes time and frequency domain analysis of vibration signatures from the spindle housing. Self learning capabilities in calibration and generic, multidiscriminant based decision making are the novel features of a system proven successful in single spindle applications1. However, use of a single sensor to monitor drill breakage in multi spindle station in a high volume manufacturing operation requires signal enhancement strategies to decipher similar signatures sensed from different spindles. Complexity of the problem increases if the station is one of the several stations in a dial machine, because one needs to consider the transmissivity characteristics between stations installed on a common rotary table.

Wind noise reaches the interior of a vehicle through a variety of mechanisms including: aerodynamic excitation of vibration and reradiation from the greenhouse surfaces; acoustic transmission through door seals including gaps and glass edge leaks, and due to airborne transmission of noise generated by wind interaction with body panels. This paper presents experimental results that quantify contributions to interior noise from individual greenhouse surfaces and from airborne sources on the underbody. The measurements were carried out on a production vehicle in a wind tunnel. Greenhouse surfaces, in addition to the driver window are important contributors to interior noise along with airborne transmission of noise generated due to the flow over and through the vehicle underbody.