Search Results

Fast, accurate delivery of metal to the shot well is critical to the success of any cold chamber die casting operation. For some metals this is a simple problem to solve. Magnesium, however, requires more innovative thinking. Simplicity of design is essential for reliable operation in the environment of a magnesium die casting facility. Complex control is required to provide speed and accuracy of shot delivery. Blending these two ingredients to produce a viable system produces a truly innovative shot delivery system for magnesium. Construction details of a newly developed stand alone system for the auto ladling of magnesium will be presented. Data with regard to speed and accuracy will also be presented.

The magnesium alloy AE42 (nominally a 4 % aluminum, 2 % rare earth alloy of magnesium) is a developmental die cast alloy with good strength and creep resistance at elevated temperatures. Standard salt spray corrosion tests have been used with controlled purity AE42 die castings to define the critical iron, nickel and copper contaminant levels below which excellent corrosion performance can be obtained. As previously observed with the magnesium alloys AZ91, AM60, and AS41, the critical iron content is dependent upon the manganese content of the alloy. While the iron:manganese tolerance for AE42 is about the same as that of AM60, the tolerance for the nickel and copper contaminants is greater than that of AZ91. When each of these contaminants is less than the critical level, the salt spray performance was equal to or better than die cast 380 aluminum and cold rolled steel.

The relationship between hydrogen gas and microporosity in magnesium alloy AZ91 was quantified, refuting the belief that hydrogen levels less than the maximum solid solubility are of no detriment. Sand castings were made from melts containing measured levels of hydrogen gas, and the amount of porosity was determined by density measurements. At concentrations below the maximum solid solubility, it was established that the amount of microporosity is directly proportional to the gas content. This supports the premise that dissolved hydrogen gas provides nucleation sites for microporosity, and that it is useful to remove all gas to achieve porosity-free cast parts.

The American public's desire to recycle and the predictions of future recycle mandates are motivating automotive OEMs and plastic suppliers to address the recycling of plastic materials. As a result, the OEMs and plastic industry groups have asked resin suppliers, automotive dismantlers and reprocessors to assist them in studying and developing solutions for the recovery of post-consumer automotive plastics and recycling those materials back into automotive applications. The Dow Chemical Company has been a participant in plastic industry sponsored projects and has initiated numerous research and development activities involving the recycling of automotive thermoplastic and thermoset materials, as well.

The market for composite engine oil sealing components, such as valve covers and oil pans, continues to expand, replacing traditional metal stamping and die casting materials. As the market for these composite components grows, so must the understanding of the material performance characteristics and the relationship of these characteristics to the design of the part. Unlike metals, composites are viscoelastic in nature, exhibiting time-temperature dependant properties. Therefore, the traditional design approach utilizing static property data to predict long-term performance under load and over a wide temperature range will not sufficiently characterize the nonlinear property response of polymeric-based composites. A robust composite sealing design requires complete materials characterization, including long-term creep performance as a function of temperature, loading, and cycling.

Increased requirements for crash energy management in automotive interiors have led to increased application of magnesium alloy AM50A. Successful integration of this new alloy with hot chamber diecasting process technology requires substantial adjustment and attention to processes and practices. This paper details the conversion of magnesium AZ91D steering column diecastings to high ductility structural alloy. Description is given of the changes made to foundry practices, casting parameters, process compliance monitoring, and hot end component management. The resulting improvements allow production of components comparable to the traditional alloy in manufacturing process demands while offering improved ductility and impact strength.

The recycling of plastics from end of useful life durable goods continues to evolve as an issue. Recycle strategies need to be based on a careful understanding of sustainability for both the environmental and business domains. The definitions and processes utilized in a recycle program can dramatically affect the economic structure. These recycle programs need to be carefully constructed to minimize cash costs. There is an emerging industry, recyclers, who may become an important link in the recycle supply chain.

The effect of non-metallic inclusions (NMIs) on the properties of die cast magnesium was investigated. NMI content was quantified by a newly developed light reflectance technique. The mechanical properties of optimized AM60B test bars were found to decrease at high inclusion levels. Low inclusion levels did not statistically reduce the mechanical properties of AM60B as compared to virgin metal. Argon-refined AM60B displayed mechanical properties that were indistinguishable from virgin alloy. AZ91D test plates were die cast at various cleanliness levels. After salt spray testing, it was found that the surface quality of the castings was slightly degraded at high NMI levels. The general corrosion performance was also affected, but paint adhesion was relatively unaffected. At high NMI levels, the corrosion performance was still better than 380 A. Machinability of the AZ91D test plates was quantified by measuring tool wear and cutting forces.

Cushioning and load distribution performance of plastic foams was investigated, using a human faceform as the loading object. A technique for measuring contact surface between faceform and plastic foam was developed. Transferrable paint applied to the foam facilitated determination of average stress over its surface, which in turn was employed to evaluate load distribution properties of the foam. Impact and static testing results on several plastic foams were analyzed. It was found that a good cushioning material characterized by low peak deceleration might show high average stress, thus making it an inefficient load distributor. The faceform used in the study incorporates the effect of face geometry during loading and thus provides a realistic simulation. Variation of material response with loading geometry and possible correlation between load distributing properties and rigidity of the foam are also discussed.

Standard salt spray corrosion tests have been used with controlled purity AM60 castings to define the critical iron, nickel, and copper contaminant levels below which excellent corrosion performance can be obtained. As previously observed with the AZ91 alloy, the iron solubility and the corrosion tolerance limit for iron are dependent upon the manganese content of the metal. The zinc free AM60 alloy has a somewhat lower tolerance for all three of the critical contaminants when compared to AZ91, but when the three contaminants are below their individual tolerance limits, the salt spray performance is again equal to or better than die cast 380 aluminum and cold rolled steel.

With the introduction of high purity corrosion resistant magnesium alloys and also the re-emphasis of quality products throughout the industrial world, the need for more accurate and more reproducible analysis between laboratories has become apparent. The availability of high quality analytical standards was one of the principle obstacles to achieving analytical agreement between laboratories. This presentation briefly reviews what until recently was available to the industry and their customers with respect to analytical methods and analytical standards and their limitations in today's quality conscious world. The development of a new series of die cast magnesium standards by The Dow Chemical Company is also described in this paper including their compositional design considerations relating to the selection of the modern direct reading emission spectrometer as the analytical instrument of choice.

Recent growth in automotive applications of magnesium die cast alloys has made the refining and recycling of magnesium scrap a key issue for the automotive and magnesium industries, if growth is to continue. Today, with only a few exceptions, commercially refined and recycled alloy is produced using a variety of flux-based processes. However, fluxless refining, has been the focus of growing interest, particularly for the in-house refining of scrap by the die cast producers. This paper summarizes the results of a study conducted to better understand the behavior of non-metallic contaminants in scrap melts and the requirements for their separation, using argon sparging. Brightness measurements were used to experimentally determine the distribution of non-metallic contaminants within scrap melts both before and after argon treatment.