Search Results

This paper presents a newly developed quasi-dimensional multi-zone dual fuel combustion model, which has been integrated within the commercial engine system simulation framework. Model is based on the modified Multi-Zone Combustion Model and Fractal Combustion Model. Modified Multi-Zone Combustion Model handles the part of the combustion process that is governed by the mixing-controlled combustion, while the modified Fractal Combustion Model handles the part that is governed by the flame propagation through the combustion chamber. The developed quasi-dimensional dual fuel combustion model features phenomenological description of spray processes, i.e. liquid spray break-up, fresh charge entrainment, droplet heat-up and evaporation process. In order to capture the chemical effects on the ignition delay, special ignition delay table has been made.

The paper presents the optimization of injection parameters of directly injected fuel in the dual fuel engine operation. The optimization is performed numerically by using a cycle simulation model of the considered engine. In the cycle simulation model, combustion is simulated by a newly developed quasi-dimensional dual fuel combustion model. The model is based on the modified multi-zone combustion model and the quasi-dimensional combustion model. The modified multi-zone combustion model handles the part of the combustion process that is governed by the mixing-controlled combustion, while the modified quasi-dimensional combustion model handles the part that is governed by the flame propagation through the combustion chamber. The developed dual fuel combustion model features a phenomenological description of spray processes, i.e. the liquid spray break-up, fresh charge entrainment, droplet heat-up, and evaporation processes.

This paper follows a cycle-simulation method for creating an engine performance map for an ethanol fueled boosted HCCI engine using a 1-dimensional engine model. Based on experimentally determined limits, the study defined operating conditions for the engine and performed a limited parameter sweep to determine the best efficiency case for each condition. The map is created using a 6-Zone HCCI combustion model coupled with a detailed chemical kinetic reaction mechanism for ethanol, and validated against engine data collected from a 1.9L 4-Cylinder VW TDI engine modified to operate in HCCI mode. The engine was mapped between engine speeds of 900 and 3000 rpm, 1 and 3 bar intake pressure, and 0.2 and 0.4 equivalence ratio, resulting in loads between idle and 14.0 bar BMEP. Analysis of a number of trends for this specific engine map are presented, such as efficiency trends, effects of combustion phasing, intake temperature, engine load, engine speed, and operating strategy.

The dual fuel combustion mode, the use of bi-fueled natural gas and diesel fuel, is an attractive alternative to standard spark ignition or compression ignition combustion modes due to potential benefits of lower CO2 emissions, lower fuel costs and the use of a fuel with an alternative supply chain. Besides the potential benefits, the dual fuel combustion mode also has its challenges. There is limited data available in the literature that illustrates how the performance of a dual fuel engine changes over the entire engine map at various operating conditions; this paper presents a comprehensive set of experimental results obtained with the conventional dual fuel operation (diesel/natural gas) at ambient intake conditions to help fill this knowledge gap.

A promising strategy for increasing thermal efficiency and decreasing emissions of a spark ignited (SI) internal combustion engine is the application of lean mixtures. The flammability limit of lean mixtures can be increased by using an active pre-chamber containing an injector and a spark plug, resulting in a combustion mode commonly called Turbulent Jet Ignition (TJI). The optimization of the combustion chamber shape and operating parameters for TJI combustion can be a demanding task, since the number of design parameters is significantly increased and is today supported by numerical simulations. In this paper, the process of the development of a numerical framework based on 3D CFD and 1D/0D numerical models that will support the research of the pre-chamber design and optimization of operating parameters will be shown. For 3D CFD modelling the AVL Fire™ code is employed, where the full combustion chamber model with intake and exhaust ports of the experimental engine is prepared.

It is a well-known fact that HCCI combustion offers the possibility of achieving high efficiency with low emissions, but with the challenges in combustion control and ability to adjust to changing environmental conditions. To resolve the aforementioned challenges, a pre-chamber induced homogeneous charge compression ignition (PC-HCCI) combustion mode was experimentally tested with aim of providing initial operating boundaries in terms of combustion stability and obtaining initial performance results. The single cylinder engine equipped with active pre-chamber and compression ratio (CR) of 17.5 was fueled by gasoline. The initial experiments were performed at the engine speed of 1600 rpm with intake air temperatures varied from 33°C to 100°C to verify the possibility of achieving the PC-HCCI combustion mode and to compare the achieved engine performance and emission results with both PCSI and pure HCCI combustion modes used as reference cases.

Exhaust gas recirculation (EGR) is a proven strategy for the reduction of NOX emissions in spark ignited (SI) engines and compression ignition engines, especially in lean burn conditions where the increase of thermal efficiency is obtained. The dilution level of the mixture with EGR is in a conventional SI engine limited by the increase of combustion instability (CoV IMEP). A possible method to extend the EGR dilution level and ensure stable combustion is the implementation of an active pre-chamber combustion system. The pre-chamber spark ignited (PCSI) engine enables fast and stable combustion of lean mixtures in the main chamber by utilizing high ignition energy of multiple flame jets penetrating from the pre-chamber to the main chamber. In this paper, as an initial research step, a numerical analysis is performed by employing the 0D/1D simulation model, validated with the initial experimental and 3D-CFD results.