Refine Your Search

Search Results

Standard

Tie Down, Cargo, Aircraft, CGU-1/B

2000-11-01
HISTORICAL
AS27260
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
Standard

AS36100 Background and Development Record

2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

Air Cargo Pallet Extenders

2004-04-26
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

CARGO PALLET EXTENDERS

1990-09-01
HISTORICAL
AS1988
Pallet extensions provide support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved. The extensions are designed to suit the contour of wide-bodied aircraft. Each extension consists of a panel or shelf extending upwards and outboards within an envelope bounded by the ULD contour (see Figures 1, 2, 3, and 4). The panel or shelf is secured in this position by means of chains, cables, or structural members attached to the rails of the adjacent sides of the pallet edge.
Standard

AIR MODE GENERAL PURPOSE CONTAINERS

1995-08-01
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

Air Mode General Purposes Containers

2014-03-25
CURRENT
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

Fittings, Cargo Tiedown, Aircraft

2012-10-15
CURRENT
AS7092B
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard

Cargo Stopper Devices

2017-02-15
CURRENT
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
Standard

Cargo Stopper Devices

2011-07-06
HISTORICAL
AS6554
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved tie-down straps meeting AS5385C (TSO C-172) requirements.
Standard

Wide-Body and Standard-Body Aircraft Lower Deck Cargo Compartment ULD Capacities

1999-03-01
HISTORICAL
AIR1869B
This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.
Standard

Wide-Body and Standard-Body Aircraft Lower Deck Cargo Compartment ULD Capacities

2009-11-20
CURRENT
AIR1869C
This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets

2002-02-24
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

AIR-LAND DEMOUNTABLE CARGO PALLET NETS

1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard

Cargo Stopper Devices

2009-05-05
HISTORICAL
ARP6022
The purpose of this SAE Aerospace Recommended Practice (ARP) is to standardize the basic design, performance and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved tie-down straps meeting AS5385C requirements.
X