Standard
Fittings, Cargo Tiedown, Aircraft
2006-04-27
HISTORICAL
AS7092A
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Search Results
Standard
Fittings, Cargo Tiedown, Aircraft
2012-10-15
CURRENT
AS7092B
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard
Fittings, Cargo Tiedown, Aircraft
1999-07-01
HISTORICAL
AS7092
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard
Fittings and Cargo Rings, Tie-Down, Aircraft Floor
2012-12-03
CURRENT
AS8905A
This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.
Standard
Air Mode General Purposes Containers
2014-03-25
CURRENT
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard
AIR MODE GENERAL PURPOSE CONTAINERS
2008-06-22
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard
Tie Downs, Cargo, Aircraft
2000-11-01
HISTORICAL
AS25959
This specification covers four types of aircraft cargo tie downs.
Standard
Tie Down, Cargo, Aircraft, CGU-1/B
2000-11-01
HISTORICAL
AS27260
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
Standard
Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C
2000-11-01
HISTORICAL
AS27444
This specification covers pallet cargo tiedown nets, designated HCU-7/E, HCU-15/C, HCU-11/C and HCU-16/C.
Standard
Tie Down, Cargo, Aircraft, Nylon Web Net
2000-11-01
HISTORICAL
AS26780
This specification covers two types of aircraft cargo tie downs, each having a capacity of 10,000 pounds.
Standard
AS36100 Background and Development Record
2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard
General Requirements for Noncertified Cargo/Baggage Containers
2018-10-18
CURRENT
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
Standard
GENERAL REQUIREMENTS FOR NONCERTIFIED LD-2, LD-4, AND LD-8 CARGO/BAGGAGE CONTAINERS
1995-06-01
HISTORICAL
AS1677B
This SAE Aerospace Standard (AS) covers the requirements for three sizes of compartment restrained lower deck containers (unit load devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specification 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this specification as certain provisions contained therein will also be applicable.
Standard
GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS
1985-03-15
HISTORICAL
AS1677
This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification.
Standard
GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS
1988-11-01
HISTORICAL
AS1677A
This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specificaton 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this Specification as certain provisions contained therein will also be applicable.
Standard
General Requirements for Noncertified Cargo/Baggage Containers
2008-06-22
HISTORICAL
AS1677C
This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.
Standard
AIR AND AIR/SURFACE (PLATFORM) CARGO PALLET NETS
1992-12-01
HISTORICAL
AS1131B
This document establishes four sizes of basic pallet nets as follows and are covered by NAS 3610 codes 2FIN, 2GIN, 2HIN and 2JIN.
Standard
Air and Air/Surface (Platform) Cargo Pallet Nets
2018-10-18
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard
AIR-LAND DEMOUNTABLE CARGO PALLET NETS
1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard
Air Cargo Pallets and Nets Compatibility
2018-10-18
CURRENT
ARP36104A
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.
