Refine Your Search

Topic

Search Results

Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa

2015-04-27
HISTORICAL
AMS03_4
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

Protection of Aluminum Alloys by Sprayed Metal Coatings

2017-03-21
CURRENT
AMS03_3A
This SAE Standard specifies the requirements for the application of sprayed metal coatings of aluminum, zinc, or aluminum-zinc based alloys for the protection of aluminum alloys against corrosion. It does not cover the metal spraying of aluminumarmour materials, which should be treated in accordance with the requirements of Def Stan 08-39.
Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa

2017-03-21
CURRENT
AMS03_4A
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

Protection of Aluminum Alloys by Sprayed Metal Coatings

2015-04-27
HISTORICAL
AMS03_3
This SAE Standard specifies the requirements for the application of sprayed metal coatings of aluminum, zinc, or aluminum-zinc based alloys for the protection of aluminum alloys against corrosion. It does not cover the metal spraying of aluminumarmour materials, which should be treated in accordance with the requirements of Def Stan 08-39.
Standard

Silver Brazing High Temperature

1965-02-01
HISTORICAL
AMS2666A
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

Silver Brazing High Temperature

1950-06-01
HISTORICAL
AMS2666
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

Brazing, Silver, For Small Pressurized Fittings

1968-05-01
HISTORICAL
AMS2667A
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Brazing, Silver, For Small Pressurized Fittings

1972-11-01
HISTORICAL
AMS2667B
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Brazing, Silver, For Small Pressurized Fittings

1995-05-01
HISTORICAL
AMS2667D
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Brazing, Silver, For Small Pressurized Fittings

1982-10-01
HISTORICAL
AMS2667C
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Silver Brazing High Temperature

1967-04-01
HISTORICAL
AMS2666B
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

Brazing, Silver, For Small Pressurized Fittings

1956-07-01
HISTORICAL
AMS2667
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Silver Brazing High Temperature

1984-01-01
CURRENT
AMS2666D
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

BRAZING, SILVER For Small Pressurized Fittings

1996-04-01
HISTORICAL
AMS2667E
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
Standard

Brazing, Silver For Small Pressurized Fittings

2002-12-13
HISTORICAL
AMS2667F
This specification covers the engineering requirements for producing brazed joints in parts fabricated from austenitic corrosion and heat resistant steels, but may also be used on carbon or low-alloy steels or copper alloys, and the properties of such joints.
X