Refine Your Search

Topic

Search Results

Standard

Polyimide Printed Circuit Boards Fabrication of

1990-01-01
CURRENT
ARP1612A
This document describes the materials, equipment, and processing techniques utilized in the fabrication of polyimide printed wiring boards. Included are recommendations for both double-sided and multilayer boards.
Standard

Physical-Chemical Characterization Techniques, Epoxy Adhesive and Prepreg Resin Systems

1985-04-01
CURRENT
ARP1610A
This recommended practice describes the physical and chemical characterization techniques for identification of epoxy adhesive and prepreg resin systems in order to verify the chemical formulation, resin B-staging (See 8.1), cure reaction rates, adhesive moisture content, and resin component mix ratios, as necessary to achieve manufacturing and quality producibility and engineering performance.
Standard

Structural Weldbonding of Aluminum Structures

1990-10-01
CURRENT
ARP1675
This SAE Aerospace Recommended Practice describes the aluminum weldbonding process for fabrication of secondary aircraft structural assemblies possessing excellent strength, fatigue life, and environmental durability.
Standard

Automated Manufacture of Continuous Multi-Ply Carbon Fiber/Epoxy Resin Impregnated Broadgoods

1988-01-01
CURRENT
ARP1674A
This document describes a manufacturing method for processing unidirectional carbon fiber/epoxy resin impregnated sheet and tape into multi-ply broadgoods and tape produced on an automated cross-plying machine. Broadgoods or tape of two or more ply configurations may be processed, where ply orientations of 0°, 45°, 90°, and 135° (as examples) may be automatically layed in a programmed sequence. In all configurations, the 0° ply direction is parallel to the length of the broadgoods roll or sheet, or tape.
Standard

Application of Direct Pressure to Resin in Curing of Epoxy and Addition Type Polyimides

1989-01-01
CURRENT
ARP1927
This recommended practice describes the materials, related equipment, and particular processing techniques utilized in process science curing of composite hardware where pressure is imparted specifically to the resin of curing composites. Included as Appendix "A" to this ARP is a discussion of the particular techniques developed for a processing science philosophy which has consistently produced void and porosity-free, large area, thick composite structures.
Standard

Cure Monitor, Electrical Methods

1994-10-01
CURRENT
ARP1926
This document describes a standard method to collect and report dielectric data for the purpose of monitoring or studying the cure of composites.
Standard

Adhesive, Film Form Metallic Structural Sandwich Construction

1999-08-01
CURRENT
AMSA25463
This specification covers the requirements for adhesives in film form for bonding metal facings to metal cores and to metal components of sandwich panels which are intended for use in primary and secondary structural airframe parts that may be exposed to temperatures up to 500°F (260°C).
Standard

Nadcap Requirements for Prepreg/Adhesive Bonding

2004-05-26
HISTORICAL
AS7118/1
This Aerospace Standard (AS) establishes the requirements for suppliers of Composites to be accredited by Nadcap. Nadcap accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the Nadcap Composites Task Group. Using the corresponding Audit Criteria (PRI AC7118) will ensure that accredited Composites suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria is also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service.
Standard

Nadcap Requirements for Prepreg/Adhesive Bonding

2008-07-30
CURRENT
AS7118/1A
This Aerospace Standard (AS) establishes the requirements for suppliers of Composites to be accredited by Nadcap. Nadcap accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the Nadcap Composites Task Group. Using the corresponding Audit Criteria (PRI AC7118) will ensure that accredited Composites suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria is also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service.
Standard

Nadcap Requirements for Composites

2004-05-26
HISTORICAL
AS7118
This Aerospace Standard (AS) establishes the requirements for suppliers of Composites to be accredited by Nadcap. Nadcap accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the Nadcap Composites Task Group. Using the corresponding Audit Criteria (PRI AC7118) will ensure that accredited Composites suppliers meet all of the requirements in this standard and all applicable supplementary standards and applicable AS7118 slash sheets. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria is also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service.
Standard

Nadcap Requirements for Core Processing

2008-07-30
CURRENT
AS7118/3A
This Aerospace Standard (AS) establishes the requirements for suppliers of Composites to be accredited by Nadcap. Nadcap accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the Nadcap Composites Task Group. Using the corresponding Audit Criteria (PRI AC7118) will ensure that accredited Composites suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria is also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service.
Standard

Nadcap Requirements for Metal Bonding

2004-05-26
HISTORICAL
AS7118/2
This Aerospace Standard (AS) establishes the requirements for suppliers of Composites to be accredited by Nadcap. Nadcap accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the Nadcap Composites Task Group. Using the corresponding Audit Criteria (PRI AC7118) will ensure that accredited Composites suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria is also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service.
X