Search Results

Standard

Thread Sealants

2021-01-27

CURRENT

J1615_202101

Male pipe threads, including male dryseal pipe threads, when made into assemblies or installed into ports, will generally leak if not covered with a sealant. This SAE Recommended Practice is intended as a guide to assist designers and/or users in the selection and application of various types of thread sealants. The designers and users must make a systematic review of each type and application and then select the sealant to fulfill the requirements of the application. The following are general guidelines and are not necessarily a complete list.

Standard

Common Port Connections Used in Truck and Bus Air Brake Systems

2022-08-05

CURRENT

J3244_202208

This SAE Information Report lists common port connection types used in truck, bus, truck-trailer, converter dolly, and multi-purpose vehicles with air brake systems at the time of publication. The purpose of the document is to give system designers and users a starting point for connector selection and a reference to the standards that govern these connector types. Also included are notes on common practices associated with these ports. CAUTION: Consult the relevant standard for the connector before making a decision on suitability for use in a specific application.

Standard

Metric Nonmetallic Air Brake System Tubing1

2004-06-30

HISTORICAL

J1394_200406

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below −40 °C (−40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies.2

Standard

Metric Nonmetallic Air Brake System Tubing1

2000-04-01

HISTORICAL

J1394_200004

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below −40 °C (−40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies.2

Standard

Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used On a Vehicular Air Brake System

2017-06-07

CURRENT

J2494/2_201706

This SAE Standard covers general dimensional specifications for non-metallic body reusable push to connect tube fittings for use in the piping of air brake systems on automotive vehicles. This type of fitting is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844. Performance requirements for SAE J844 are covered in SAE J1131. See SAE J2494-3 for the performance requirements of Reusable (push-to-connect) fittings intended for use in Automotive Air Brake Systems and U.S. Department of Transportation FMVSS 571.106.

Standard

Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used On a Vehicular Air Brake System

2002-10-04

HISTORICAL

J2494/2_200210

This SAE Standard covers general dimensional specifications for non-metallic body reusable push to connect tube fittings for use in the piping of air brake systems on automotive vehicles. This type of fitting is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844. Performance requirements for SAE J844 are covered in SAE J1131. See SAE J2494-3 for the performance requirements of Reusable (push-to-connect) fittings intended for use in Automotive Air Brake Systems and U.S. Department of Transportation FMVSS 571.106.

Standard

Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System

2017-05-30

CURRENT

J2494/1_201705

This SAE Standard covers general and dimensional specifications for brass bodied reusable Push to Connect tube fittings for use in the piping of vehicular air brake systems. This type of fitting is intended for use with nylon tubing per SAE J844. See SAE J2494-3 for the Performance Requirements of Reusable (Push to Connect) Fittings Intended for Use in Automotive Air Brake Systems and U.S. Department of Transportation, National Highway Traffic Safety Administration (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS) 571.

Standard

Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System

2011-05-10

HISTORICAL

J2494/1_201105

This SAE Standard covers general and dimensional specifications for brass bodied reusable Push to Connect tube fittings for use in the piping of vehicular air brake systems. This type of fitting is intended for use with nylon tubing per SAE J844. See SAE J2494-3 for the Performance Requirements of Reusable (Push to Connect) Fittings Intended for Use in Automotive Air Brake Systems and U.S. Department of Transportation, National Highway Traffic Safety Administration (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS) 571.

Standard

Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System

2004-08-31

HISTORICAL

J2494/1_200408

This SAE Standard covers general and dimensional specifications for brass bodied reusable Push-to-Connect tube fittings for use in the piping of vehicular air brake systems. This type of fitting is intended for use with nylon tubing per SAE J844. Performance requirements for SAE J844 are covered in SAE J2494-3. See SAE J2494-3 for the Performance Requirements of Reusable (Push-to-Connect) Fittings Intended for Use in Automotive Air Brake Systems and U.S. Department of Transportation FMVSS 571.

Standard

Cartridge Cavity

2023-06-02

CURRENT

J2494/4_202306

This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.

Standard

Cartridge Cavity

2011-10-28

HISTORICAL

J2494/4_201110

This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.

Standard

Cartridge Cavity

2018-10-30

HISTORICAL

J2494/4_201810

This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.

Standard

REFRIGERATION TUBE FITTINGS

1977-10-01

HISTORICAL

J513F_197710

This standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figs. 1-42 and Tables 1-16. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 deg flares on tubing to be used in conjunction with these fittings are given in Fig. 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1-16 with respect to all unspecified detail.

Standard

REFRIGERATION TUBE FITTINGS

1977-10-01

HISTORICAL

J513_197710

This standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figs. 1-42 and Tables 1-16. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 deg flares on tubing to be used in conjunction with these fittings are given in Fig. 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1-16 with respect to all unspecified details.

Standard

REFRIGERATION TUBE FITTINGS

1990-06-01

HISTORICAL

J513_199006

This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 3 to 18. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 3 to 18 with respect to all unspecified details.

Standard

REFRIGERATION TUBE FITTINGS—GENERAL SPECIFICATIONS

1993-06-01

HISTORICAL

J513_199306

This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 1 to 16. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1 to 16 with respect to all unspecified details.

Standard

REFRIGERATION TUBE FITTINGS

1968-05-01

HISTORICAL

J513C_196805

This standard covers complete general and dimensional specifications for refrigeration flare type tube fittings intended for general use with flared annealed copper tubing in refrigeration applications. Also included is an appendix covering the coding system for identification of fittings. The inclusion of dimensional data in this standard is not intended to imply that all of the fittings described are stock production items. Consumers are requested to consult with manufacturers concerning availability.

Standard

Refrigeration Tube Fittings—General Specifications

2019-12-19

CURRENT

J513_201912

This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 1 to 15. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1 to 15 with respect to all unspecified details.

Standard

REFRIGERATION TUBE FITTINGS—GENERAL SPECIFICATIONS

1994-05-01

HISTORICAL

J513_199405

This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 1 to 16. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1 to 16 with respect to all unspecified details.

Standard

REFRIGERATION TUBE FITTINGS—GENERAL SPECIFICATIONS

1996-06-01

HISTORICAL

J513_199606

This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 1 to 15. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications. Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533. The following general specifications supplement the dimensional data contained in Tables 1 to 15 with respect to all unspecified details.