Refine Your Search

Search Results

Standard

One-Way Clutches - Nomenclature and Terminology

2011-08-12
CURRENT
J1087_201108
The definitions and illustrations in this SAE Recommended Practice are intended to establish common nomenclature and terminology for automotive transmission one-way clutches.
Standard

One-Way Clutches--Nomenclature and Terminology

1990-10-01
HISTORICAL
J1087_199010
The definitions and illustrations in this SAE Recommended Practice are intended to establish common nomenclature and terminology for automotive transmission one-way clutches.
Standard

One-Way Clutches--Nomenclature and Terminology

1984-01-01
HISTORICAL
J1087_198401
The definitions and illustrations in this SAE Recommended Practice are intended to establish common nomenclature and terminology for automotive transmission one-way clutches.
Standard

One-Way Clutches--Nomenclature and Terminology

2000-05-16
HISTORICAL
J1087_200005
The definitions and illustrations in this SAE Information Report are intended to establish common nomenclature and terminology for automotive transmission one-way clutches.
Standard

SAE Band Friction Test Machine Guidelines

2012-03-19
CURRENT
J1499_201203
This SAE Recommended Practice is intended as a guide toward implementation of a standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE band friction test machine is used to evaluate the frictional characteristics of automatic transmission band friction materials with automatic transmission fluids. It can also be used to conduct durability tests on wet friction systems.
Standard

Cast Iron Sealing Rings (Metric)

2015-09-02
CURRENT
J1236_201509
The purpose of this SAE Recommended Practice is to establish guidelines for the automatic transmission and hydraulic systems engineer to design cast iron sealing rings and select acceptable width, thickness, coatings, and other accepted design details.
Standard

Cast Iron Sealing Rings (Metric)

2007-10-22
HISTORICAL
J1236_200710
The purpose of this SAE Recommended Practice is to establish specifications for use as a guide to the automatic transmission and hydraulic systems designer, helping him to select cast iron sealing ring width, thickness, coatings, and other accepted design details.
Standard

Cast Iron Sealing Rings (Metric)

1995-05-01
HISTORICAL
J1236_199505
The purpose of this SAE Recommended Practice is to establish specifications for use as a guide to the automatic transmission and hydraulic systems designer, helping him to select cast iron sealing ring width, thickness, coatings, and other accepted design details.
Standard

Cast Iron Sealing Rings (Metric)

1993-04-01
HISTORICAL
J1236_199304
The purpose of this SAE Recommended Practice is to establish specifications for use as a guide to the automatic transmission and hydraulic systems designer, helping him to select cast iron sealing ring width, thickness, coatings, and other accepted design details.
Standard

Park Standard for Automatic Transmissions

2007-10-22
HISTORICAL
J2208_200710
To provide a Recommended Practice for validating the function and integrity of an automatic transmission park mechanism with its associated control system and environment.
Standard

Park Standard for Automatic Transmissions

2016-05-26
CURRENT
J2208_201605
To provide a Recommended Practice for validating the function and integrity of an automatic transmission park mechanism with its associated control system and environment.
Standard

Park Standard for Automatic Transmissions

1993-06-01
HISTORICAL
J2208_199306
To provide a Recommended Practice for validating the function and integrity of an automatic transmission park mechanism with its associated control system and environment. To define the requirements for parking mechanisms of automatic transmissions through evaluation in designed ratios.
Standard

Automatic Transmission Hydraulic Pump Test Procedure

2015-03-17
CURRENT
J2311_201503
This SAE Recommended Practice provides a method to determine the performance characteristics of the hydraulic oil pumps used in automatic transmissions and automatic transaxles. This document outlines the specific tests that describe the performance characteristics of these pumps over a range of operating conditions and the means to present the test data. This document is not intended to assess pump durability.
Standard

Automatic Transmission Intake Filter Test Procedure

2013-05-14
CURRENT
J2312_201305
This test procedure is intended to apply to hydraulic pump suction filters and strainers used in automotive automatic transmissions that include hydraulic power pumps. The various paragraphs of Section 5, “Test Procedures,” include a variety of tests and alternative tests that are not applicable to all filters and applications, so the engineer must specify which tests are to be performed for a particular application. These test procedures are intended to evaluate filter functional performance characteristics only, durability is not evaluated under this standard. Filter design requirements must be specified by the engineer on the filter assembly drawing, an applicable engineering specification, or summarized on an application data sheet similar to that found in this recommended practice. See Figure 6, “Filter Assembly Application and Data Sheet.” Pressure circuit filters, both barrier and system contamination control types, are not covered under this standard.
Standard

Automatic Transmission Intake Filter Test Procedure

2005-04-26
HISTORICAL
J2312_200504
This test procedure is intended to apply to hydraulic pump suction filters and strainers used in automotive automatic transmissions that include hydraulic power pumps. The various paragraphs of Section 5, "Test Procedures," include a variety of tests and alternative tests that are not applicable to all filters and applications, so the engineer must specify which tests are to be performed for a particular application. These test procedures are intended to evaluate filter functional performance characteristics only, durability is not evaluated under this standard. Filter design requirements must be specified by the engineer on the filter assembly drawing, an applicable engineering specification, or they may be summarized on an application data sheet similar to that found in this recommended practice. See Figure 6, "Filter Assembly Application and Data Sheet." Pressure circuit filters, both barrier and system contamination control types, are not covered under this standard.
Standard

Rectangular Cross Section Polymeric Sealing Rings (Metric)

1999-01-01
HISTORICAL
J2310_199901
The purpose of this SAE Recommended Practice is to establish guidelines for the automatic transmission and hydraulic systems Engineer to design rectangular cross section seals for rotating and static grooved shaft applications. Also included are material property comparisons of polymeric materials suitable for these applications. Material covered in this document is not intended to include aluminum applications.
Standard

Rectangular Cross Section Polymeric Sealing Rings

2011-05-02
CURRENT
J2310_201105
The purpose of this SAE Recommended Practice is to establish guidelines for the automatic transmission and hydraulic systems engineer to design rectangular cross section seals for rotating and static grooved shaft applications. Also included are property comparisons of polymeric materials suitable for these applications. Historically, material covered in this document is not intended to include aluminum contact applications.
Standard

Automatic Transmission Hydraulic Pump Test Procedure

1999-01-28
HISTORICAL
J2311_199901
This SAE Recommended Practice provides a method to determine the performance characteristics of the hydraulic oil pumps used in automatic transmissions and automatic transaxles. This document outlines the specific tests that describe the performance characteristics of these pumps over a range of operating conditions and the means to present the test data. This document is not intended to assess pump durability.
Standard

SAE No.2 Friction Test Machine 6000 r/min Stepped Power Test

2013-03-11
CURRENT
J2488_201303
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 6000 r/min Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 6000 r/min and is intended as a standard procedure for common use by both suppliers and end users.
Standard

SAE No. 2 Friction Test Machine 3600 r/min Stepped Power Test

2012-05-31
CURRENT
J2487_201205
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 3600 r/min Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 3600 r/min and is intended as a standard procedure for common use by both suppliers and end users.
X