Search Results

Viewing 1 to 19 of 19

Standard

Automotive V-Belt Drives

2001-12-10

HISTORICAL

J637_200112

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications, and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

Automotive V-Belt Drives

2012-08-14

CURRENT

J637_201208

Standard

AUTOMOTIVE V-BELT DRIVES

1989-02-01

HISTORICAL

J637_198902

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

AUTOMOTIVE V-BELT DRIVES

1997-08-01

HISTORICAL

J637_199708

Standard

Automotive Synchronous Belt Drives

2012-08-14

CURRENT

J1313_201208

The following information applies to automotive camshaft drives, distributor drives, or other underhood drives that may require synchronization. For other power transmission drives requiring synchronization, refer to Specifications for Drives using Synchronous Belts (MXL, XL, L, H, XH and XXH belt sections) (IP 24/1978), published jointly by the Rubber Manufacturers Association (RMA), the Mechanical Power Transmission Association (MPTA), and the Rubber Association of Canada (RAC).

Standard

SI (Metric) Synchronous Belts and Pulleys

2012-07-05

CURRENT

J1278_201207

Synchronous belt drives consist of a toothed belt which mates with grooved pulleys to provide a precise speed ratio between the driver and driven pulleys. This SAE Standard covers the synchronous belt and pulley sections currently in use in automotive applications such as camshaft, distributor, and other underhood drives that may require synchronization. It also provides for future sections to be added as usage develops.

Standard

V-RIBBED BELTS AND PULLEYS

1984-08-01

HISTORICAL

J1459_198408

This standard covers dimensions, tolerances, and methods of measurement of V-Ribbed belts and pulleys for use on automotive1 drives.

Standard

V-Ribbed Belts and Pulleys

2022-05-16

CURRENT

J1459_202205

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

V-Ribbed Belts and Pulleys

2001-09-07

HISTORICAL

J1459_200109

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

V-Ribbed Belts and Pulleys

2009-12-18

HISTORICAL

J1459_200912

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

V-RIBBED BELTS AND PULLEYS

1988-08-01

HISTORICAL

J1459_198808

This standard covers dimensions, tolerances, and methods of measurement of V-ribbed belts and pulleys for use on automotive1 drives.

Standard

Accessory Drive Tensioner Test Standards

2016-07-01

HISTORICAL

J2436_201607

To document test procedures and set-ups that address known failure modes for Accessory Drive automatic tensioners This SAE Standard does not encompass the pulley or pulley bearing. The sample sizes and acceptance criteria should be determined by agreement between the original equipment manufacturer (OEM) and the supplier. The failure modes to be addressed are: Test Factors include: NOTE: The Belt Drive Committee recommends that this spec be run using test parts that are close to the upper and lower specifications for load output and damping (tails testing).

Standard

Accessory Drive Tensioner Test Standards (Mechanical Rotary Type)

1998-07-01

HISTORICAL

J2436_199807

To document test procedures and set-ups that address known failure modes for mechanical rotary tensioners and establish minimum acceptance criteria. This SAE Standard does not encompass the pulley or pulley bearing. The sample sizes should be determined by agreement between the original equipment manufacturer (OEM) and the supplier. The failure modes to be addressed are: a Durability Corrosion Contamination Structural Wear Temperature Alignment b Functional Clamp Load Damping Drop (Safety) Lift Lugs Load Noise Ozone Snap

Standard