Refine Your Search

Search Results

Standard

Axle Application Load Rating for Industrial Wheel Loaders and Backhoe Loaders

1988-02-01
HISTORICAL
J43_198802
The intent of this recommended practice is to limit declared axle load ratings. These latest editorial revisions bring this recommended practice closer to its original concept. It is intended to make this an interim document until a performance criteria document can be written. the purpose of this SAE Recommended Practice is to establish a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders.
Standard

Mounting Flanges for Engine Accessory Drives

2011-12-06
CURRENT
J896_201112
This SAE Recommended Practice shows mounting flange dimensions for engine accessory drives such as pulleys, extended shaft flanges, and coupling halves.
Standard

Engineering Design Serviceability Guidelines--Construction and Industrial Machinery--Serviceability Definitions--Off-Road Work Machines

2009-12-07
CURRENT
J817/1_200912
This SAE Information Report establishes a hierarchy of Product Effectiveness, defines Serviceability, Maintainability, Repairability, and Diagnostics, and relates them to Product Effectiveness. Effectiveness of this procedure depends on its use during early stages of design. This document applies to machines defined in J1057 and categorized in J1116.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1987-12-01
J925_198712
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1984-06-01
J925_198406
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1984-10-01
J925_198410
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1985-10-01
HISTORICAL
J1092_198510
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1986-06-01
HISTORICAL
J1092_198606
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1977-06-01
HISTORICAL
J1092_197706
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Nomenclature--Industrial Tractors (General Purpose Wheel)

1993-08-01
HISTORICAL
J1092_199308
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2. SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

2003-05-13
CURRENT
J1092_200305
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2012-05-02
CURRENT
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
Standard

Definitions for Machine Availability (Off-Road Work Machines)

1987-04-01
HISTORICAL
J1032_198704
The purpose of this SAE Recommended Practice is to provide a set of recognized definitions as a universally understood means of communication among all people interested in the inherent availability of off-Road Work machines. It is not the intent of this document to provide an absolute measure of unit availability. The intent is to provide common definitions for classifying and evaluating operation, repair, and maintenance data. This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.
Standard

Definitions for Machine Availability (Off-Road Work Machines)

2007-10-11
CURRENT
J1032_200710
The purpose of this SAE Recommended Practice is to provide a set of recognized definitions as a universally understood means of communication among all people interested in the inherent availability of off-Road Work machines. It is not the intent of this document to provide an absolute measure of unit availability. The intent is to provide common definitions for classifying and evaluating operation, repair, and maintenance data. This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.
Standard

Categories of Off-Road Self-Propelled Work Machines

2013-01-02
CURRENT
J1116_201301
This SAE Standard applies to self-propelled off-road work machines. Included are the following categories: Earthmoving Implements and Attachments Forestry Road Building and Maintenance Specialized Mining Powered Industrial Trucks This SAE Standard does not apply to Agricultural Tractors as defined in ANSI/ASAE S390 although some SAE standards are also applicable to Agricultural Tractors. NOTE: Most standards relating to agricultural tractors and implements are developed by ASABE.
Standard

Categories of Off-Road Self-Propelled Work Machines

1979-02-01
HISTORICAL
J1116_197902
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
Standard

Categories of Off-Road Self-Propelled Work Machines

1978-04-01
HISTORICAL
J1116_197804
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
X