Refine Your Search

Topic

Search Results

Standard

OEM Plastic Parts Repair

2019-10-24
CURRENT
J1573_201910
This SAE Recommended Practice defines the information required to repair the various types of plastics found on modern light-duty highway vehicles. Information is included for the repair and refinishing of most plastic body parts, both interior and exterior. Repair information is described for all commonly used plastics including, but not limited to, polyurethanes, polycarbonate blends, modified polypropylenes, polyethylenes and nylons. Repairs can be made to these types of plastics using two-part (2K) repair adhesives, plastic welding, and other materials available from body shop suppliers. When a new type of plastic is being introduced to the market through a new vehicle program, specific repair and refinishing procedures should be provided, following the format in this document. Sheet-molded compounds (SMC), fiber-reinforced plastics (FRP) and carbon fiber reinforced plastics can also be repaired using slightly different procedures and repair materials.
Standard

OEM Plastic Parts Repair

2011-12-20
HISTORICAL
J1573_201112
This SAE Recommended Practice defines the information required to repair the various types of plastics found on modern light-duty highway vehicles. Information is included for the repair and refinishing of most plastic body parts, both interior and exterior. Repair information is described for all commonly used plastics including, but not limited to, polyurethanes, polycarbonate blends, modified polypropylenes, polyethylenes and nylons. Repairs can be made to these types of plastics using two-part (2K) repair adhesives, plastic welding, and other materials available from body shop suppliers. When a new type of plastic is being introduced to the market through a new vehicle program, specific repair and refinishing procedures should be provided, following the format in this document. Sheet-molded compounds (SMC), fiber-reinforced plastics (FRP) and carbon fiber reinforced plastics can also be repaired using slightly different procedures and repair materials.
Standard

Inspection of Energy Absorbing Bumper Mounts

1987-05-01
CURRENT
J1571_198705
Since 1973, regulations established by the National Highway Traffic Safety Administration (NHTSA) have required automobile manufacturers to equip all passenger cars with 2.5 - 5 mph energy absorbing bumper systems. The purpose of this SAE Recommended Practice is to provide guidelines which will help to determine the nature and extent of damage a hydraulic or mechanical energy absorber has received, after the bumper system has been involved in a collision. It is also to suggest appropriate repair procedures for energy absorbers that have sustained minor damage and are repairable.
Standard

Unibody Weld Quality Testing

1987-05-01
CURRENT
J1827_198705
The most important aspect of structural unibody repair is the correct application of Gas Metal Arc Welding, or G.M.A.W (formerly called Metallic Inert Gas, M.I.G) welding. It is the intent of the SAE Recommended Practice to inform the body repairman on how to evaluate his welds and check if the welder is properly adjusted. By doing this, he can improve the quality of his structural repairs and develop consistent welds.
Standard

Uniform Reference and Dimensional Guidelines for Collision Repair

2019-10-28
CURRENT
J1828_201910
This SAE Recommended Practice defines, for vehicle manufacturers and collision information and equipment providers, the types of vehicle dimensional data needed by the collision repair industry and aftermarket equipment modifiers to properly perform high-quality repairs to damaged vehicles. Both bodyframe and unitized vehicles, including passenger cars and light trucks, are addressed.
Standard

Uniform Reference and Dimensional Guidelines for Collision Repair

2014-06-26
HISTORICAL
J1828_201406
This SAE Recommended Practice defines, for vehicle manufacturers and collision information and equipment providers, the types of vehicle dimensional data needed by the collision repair industry and aftermarket equipment modifiers to properly perform high-quality repairs to damaged vehicles. Both bodyframe and unitized vehicles, including passenger cars and light trucks, are addressed.
Standard

ISP-Vehicle Location Referencing Standard

2019-10-03
CURRENT
J1746_201910
This SAE Standard is intended to be used for the communication of spatial data references between central sites and mobile vehicles on roads. References can be communicated from central site to vehicles, or from vehicles to central sites. The document may also be used where appropriate by other ITS applications requiring location references between data sets.
Standard

ISP-Vehicle Location Referencing Standard

1999-12-15
HISTORICAL
J1746_199912
This SAE Standard is intended to be used for the communication of spatial data references between central sites and mobile vehicles on roads. References can be communicated from central site to vehicles, or from vehicles to central sites. The document may also be used where appropriate by other ITS applications requiring location references between data sets.
Standard

A Conceptual Its Architecture: An Atis Perspective

2003-05-05
CURRENT
J1763_200304
This SAE Information Report represents an information report on a conceptual ITS architecture and its accompanying protocols from the perspective of Advanced Traveller Information Systems providers and users. While a specific logical and physical architecture for ITS is still in the development stages, this conceptual architecture provides a robust general view of ITS functions and interfaces.
Standard

Information Report on Its Terms and Definitions

2003-05-05
CURRENT
J1761_200304
This SAE Information Report defines consistent terminology for Intelligent Transportation Systems (ITS). The list of defined terms is followed by a list of acronyms. Certain criteria were used in selecting terms for this document. Terms in widespread use in the ITS community covering significant services, technologies and applications were chosen. This document focuses on terms used in the United States, although it covers aspects of worldwide ITS deployment. This document focuses on automotive applications, which include interfaces to and from the automobile. Later version may include a wider scope. ITS includes a wide array of services, applications, and technologies. The Department of Transportation ITS National program Plan divides ITS into 29 User Services, which are included in this glossary. The User Services range from pre-Trip Travel Planning to Fully Automated Highway Systems.
Standard

Data Security Services

2001-12-26
HISTORICAL
J1760_200112
The scope of this SAE Recommended Practice is to require the use of the same Security Services as defined by the International Standard ISO/CD 15764, modified by the Class of Security as determined by the resource provider and referenced in Table 1, Extended Data Link Security References.
Standard

Data Security Services

2019-10-09
CURRENT
J1760_201910
The scope of this SAE Recommended Practice is to require the use of the same Security Services as defined by the International Standard ISO/CD 15764, modified by the Class of Security as determined by the resource provider and referenced in Table 1, Extended Data Link Security References.
Standard

Vehicle Jack Requirements and Test Procedure

2005-02-04
CURRENT
J1884_200502
The scope of this SAE Recommended Practice is restricted to the testing of jacks supplied as original equipment on passenger cars, light trucks, and vans. To this end, both component suppliers and vehicle manufacturers are guided in the proper design and testing of jacks. The purpose of this document is to provide a test procedure that can be used to ensure reasonable quality and uniformity for vehicle jacks as supplied as original equipment.
Standard

Performance Assurance of Remanufactured, Hydraulically-Operated Rack and Pinion Steering Gears

2007-08-16
CURRENT
J1890_200708
In order to insure that the remanufactured and/or rebuilt steering gear has and maintains the reliability and performance associated with a new OEM steering gear, it is essential that the following procedures be followed; if in-house engineering capabilities are limited, it may be necessary to consult with an outside laboratory to insure all testing methods used meet with the requirements outlined in this paper.
Standard

Universal Symbols for Operator Controls

1987-06-01
CURRENT
J1500_198706
This standard is to delineate the symbols used to identify controls, indicators, and tell-tales for automotive vehicles, trucks, off-the-road vehicles, construction equipment, industrial and recreational transportation and is for reference purposes only. The symbol application is to be found within the appropriate standards listed.
Standard

Universal Symbols for Operator Controls

1986-10-01
HISTORICAL
J1500_198610
This standard is to delineate the symbols used to identify controls, indicators, and tell-tales for automotive vehicles, trucks, off-the-road vehicles, construction equipment, industrial and recreational transportation and is for reference purposes only. The symbol application is to be found within the appropriate standards listed.
Standard

Universal Symbols for Operator Controls

1986-07-01
HISTORICAL
J1500_198607
This standard is to delineate the symbols used to identify controls, indicators, and tell-tales for automotive vehicles, trucks, off-the-road vehicles, construction equipment, industrial and recreational transportation and is for reference purposes only. The symbol application is to be found within the appropriate standards listed.
X