Search Results

Standard

SOUND POWER LEVEL MEASUREMENTS - EARTHMOVING MACHINERY (DOZER, LOADER, EXCAVATOR, AND BACKHOE) - IN PLACE DYNAMIC - SOUND PRESSURE LEVEL OR SOUND INTENSITY METHOD

1987-04-01

HISTORICAL

J1805_198704

The requirements for setting up and operating the machinery, the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with manufacturer's recommendations pending finalization of ANSI documents on the subject of sound intensity procedures. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.

Standard

Sound Power Level Measurements of Work Machines—Static and In-Place Dynamic Methods

2008-10-23

HISTORICAL

J1805_200810

This SAE Standard is used to determine the exterior A-weighted equivalent sound power level of static and in-place dynamic machines (dozer, loader, excavator, and backhoe) similar to the sound power obtained in ISO 6393 static and ISO 6395 dynamic sound power test procedures. Additional machine types, specifically sweepers and scrubbers, covered by SAE J2130 have been added, and other work machine types covered by SAE J1116 may be added with appropriate cycle descriptions and machine preparation. The recommended test procedures include conventional integrating sound pressure level methods or the sound intensity method using paired microphones. The sound intensity methodology provides a practical indoor alternative and permits measurement in the factory environment. The procedures in this document assume that the dominant sources are not highly sensitive to load (i.e., cooling fan, engine, track system).

Standard

Sound Measurement—Off-Road Work Machines—Operator—Singular Type

2009-01-13

HISTORICAL

J919_200901

This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.

Standard

OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE CONSTRUCTION MACHINERY—SINGULAR TYPE TEST

1976-03-01

HISTORICAL

J919B_197603

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring sound levels at the operator station for powered mobile construction machinery of 15 kW (20 bhp) rated and over. This Recommended Practice is to cover machinery that has operator stations where the operator can either stand or sit and will be transported by the machine during its operation. The sound levels obtained by using the test procedures set forth in this SAE Recommended Practice are in general repeatable and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle.

Standard

OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY—SINGULAR TYPE TEST

1979-04-01

HISTORICAL

J919C_197904

This SAE Standard is applicable to machinery of 15 kw (20 bhp) rated and over, that have operator stations where the operator can either stand or sit and will be transported by the machine during its operation. It is not intended for use with agricultural equipment. The sound levels obtained by using the test procedures set forth in this SAE Standard are in general repeatable, and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle. For measurement and calculation of the operator’s sound exposure, use SAE Recommended Practice J1166a.

Standard

MEASUREMENT OF SOUND LEVEL AT OPERATOR STATION

1966-05-01

HISTORICAL

J919_196605

Standard

SOUND MEASUREMENT - EARTHMOVING MACHINERY - OPERATOR - SINGULAR TYPE

1986-06-01

HISTORICAL

J919_198606

This SAE Standard is applicable to machinery that have operator stations where the operator can either stand or sit and will be transported by the machine during its operation. It is not intended for use with agricultural equipment. The sound levels obtained by using the test procedures set forth in this SAE Standard are in general repeatable, and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle. For measurement and calculation of the operator's sound exposure, use SAE Recommended Practice J1166 JUN86.

Standard

SOUND LEVEL MEASUREMENTS AT THE OPERATOR STATION FOR AGRICULTURAL AND CONSTRUCTION EQUIPMENT

1971-04-01

HISTORICAL

J919A_197104

Standard

Sound Measurement - Off-Road Work Machines - Exterior

1975-06-01

HISTORICAL

J88A_197506

This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound levels for self-propelled sweepers as defined in SAE J2130 and self-propelled off-road work machines in categories 1,2,4, and 5 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.

Standard

Sound Measurement—Off-Road Work Machines—Exterior

2006-02-09

HISTORICAL

J88_200602

This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.

Standard

EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE CONSTRUCTION EQUIPMENT

1972-11-01

HISTORICAL

J88_197211

This SAE Recommended Practice sets forth the instrumentation and procedure to be used in measuring exterior sound levels for powered mobile construction equipment of 20 rated bhp and over. It is not intended to cover operation of safety devices (such as backup alarms) and equipment designed primarily for operation on highways or within factories and building areas, aircraft, or recreational vehicles, such as snowmobiles and boats. The sound levels obtained by using the test procedures set forth in this SAE Recommended Practice are repeatable and representative of the sound levels generated by the equipment during normal operating conditions.

Standard

EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY

1979-04-01

HISTORICAL

J88B_197904

This SAE Standard is applicable to machinery of 15 kw (20 rated bhp) and over. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.

Standard

SOUND MEASUREMENT—EARTHMOVING MACHINERY—EXTERIOR

1985-03-01

HISTORICAL

J88_198503

This SAE Standard is applicable to machinery of 15 kw (20 rated bhp) and over. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.

Standard

SOUND MEASUREMENT - EARTHMOVING MACHINERY - EXTERIOR

1986-06-01

HISTORICAL

J88_198606

This SAE Standard is applicable to machinery that is primarily used in construction and mining applications. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.

Standard

Sound Measurement - Construction Site

2021-07-15

CURRENT

J1075_202107

This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.

Standard

Sound Measurement—Construction Site

2007-11-09

HISTORICAL

J1075_200711

This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.

Standard

Sound Measurement - Construction Site

2013-03-19

HISTORICAL

J1075_201303

This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.

Standard

MEASUREMENT PROCEDURE FOR DETERMINING A REPRESENTATIVE SOUND LEVEL AT A CONSTRUCTION SITE BOUNDARY LOCATION

1978-04-01

HISTORICAL

J1075_197804

This SAE Recommended Practice sets forth procedures and instrumentation to be used for determining a representative sound level during a representative time period at selected measurement locations on a construction site boundary. It concerns the community adjacent to the construction site, and it is not intended for use in determining occupational hearing damage risk.

Standard

SOUND MEASUREMENT—CONSTRUCTION SITE

1985-04-01

HISTORICAL

J1075_198504

This SAE Recommended Practice sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The practice is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgement of the user.

Standard

SOUND MEASUREMENT—CONSTRUCTION SITE

1985-08-01

HISTORICAL

J1075_198508

This SAE Recommended Practice sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The practice is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgement of the user.