Refine Your Search

Date

Date

Topic

Topic

Ship Fluid Systems Committee Fluid power systems Fuel systems

Search Results

Viewing 1 to 20 of 44
123Next >Last >>
Sort by relevance
Standard

Low Collapse Pressure Hydraulic Filter Element – 380 L/min Flow, 3.5 MPa Collapse Pressure, Filtration Ratio = ?? at xx µm
2013-01-02
WIP
J2321/4
This specification sheet establishes requirements for a low collapse pressure configuration filter element of a specific configuration with a minimum filtration ratio of 75 for particles larger than ? μm when designed and tested in accordance with SAE J2321 and this specification sheet. Note: The efficiency and dirt capacity have not yet been determined..
Standard

Hydraulic System Diagrams and Associated Tables for Marine Vehicles
2012-09-17
WIP
J1780
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein. The purpose of this document is to specify the minimum technical content of marine and submergence vehicle hydraulic system diagrams and provide a standard format. Diagrams prepared in accordance with this document will be suitable for use in procurement activity, shipboard installation, and technical manuals for use in troubleshooting, operation, and maintenance of the hydraulic system.
Standard

HYDRAULIC SYSTEM DIAGRAMS AND ASSOCIATED TABLES FOR MARINE VEHICLES
1991-04-01
CURRENT
J1780_199104
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein.
Standard

Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants
2015-08-21
WIP
J2890
1. Scope. 1.1 This Recommended Practice defines a procedure, which will aid in assessing the contaminant sensitivity of hydraulic components. This procedure utilizes a very high level of contaminant that permits an accelerated test to determine the affects of contamination in a relatively short period. This recommended practice utilizes the contamination sensitivity test circuit and contaminants identified in SAE J2470. 1.2 This procedure does not establish contamination sensitivity requirements for any hydraulic component. The user of this procedure needs to be aware of the system contamination level that the component will operate in and select test contamination levels significantly higher that the operating level in order to assess the suitability of the component.
Standard

Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants
2010-06-21
CURRENT
J2890_201006
This Recommended Practice defines a procedure, which will aid in assessing the contaminant wear characteristics of hydraulic components. This procedure utilizes a very high level of contaminant that permits an accelerated test to determine the wear effects of contamination in a relatively short period. This recommended practice utilizes the contamination sensitivity test circuit identified in SAE J2470.
Standard

NOISE CONTROL IN FLUID POWER SYSTEMS OF MARINE VEHICLES
1992-07-01
HISTORICAL
J1782_199207
Hydraulic and pneumatic systems are used on marine vehicles for steering, vehicle control and utility services. System components that generate and transmit noise are of concern. Noise of prime movers and lift systems is beyond the scope of this report.
Standard

Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft
2015-05-12
CURRENT
J1775_201505
This Information Report provides a description of bleed-air pneumatic system elements and identifies parameters required to define the requirements for a detailed specification. Specific design requirements are dependent on the application and should be incorporated in a detailed specification.
Standard

Ship Systems and Equipment—Hydraulic Systems—Noise Control
2006-11-13
HISTORICAL
J1782_200611
Hydraulic systems are used on marine vehicles for steering, vehicle control, and utility services. System components that generate and transmit noise are of concern. This SAE Information Report (a) addresses noise requirements which may apply to the hydraulic systems of ships and submersibles, and (b) identifies noise sources and techniques which may be used to reduce system noise. Noise of power sources (e.g., electric motors) and end items (e.g., steering linkages) is beyond the scope of this document.
Standard

Ship Systems and Equipment—Hydraulic Systems—Noise Control
2000-03-01
HISTORICAL
J1782_200003
Hydraulic systems are used on marine vehicles for steering, vehicle control, and utility services. System components that generate and transmit noise are of concern. This SAE Information Report (a) addresses noise requirements which may apply to the hydraulic systems of ships and submersibles, and (b) identifies noise sources and techniques which may be used to reduce system noise. Noise of power sources (e.g., electric motors) and end items (e.g., steering linkages) is beyond the scope of this document.
Standard

Ship Systems and Equipment - Hydraulic Systems - Noise Control
2013-05-31
CURRENT
J1782_201305
Hydraulic systems are used on marine vehicles for steering, vehicle control, and utility services. System components that generate and transmit noise are of concern. This SAE Information Report (a) addresses noise requirements which may apply to the hydraulic systems of ships and submersibles, and (b) identifies noise sources and techniques which may be used to reduce system noise. Noise of power sources (e.g., electric motors) and end items (e.g., steering linkages) is beyond the scope of this document.
Standard

SPECIFICATIONS AND STANDARDS FOR MARINE HYDRAULIC SYSTEMS AND COMPONENTS
1992-05-30
HISTORICAL
J1784_199205
This document lists military and industry specifications and standards that are considered to be of particular interest to designers of marine vehicle hydraulic systems. SAE AIR737 lists additional aerospace hydraulic documents which occasionally may have application in marine hydraulic systems (see 3.2.1).
Standard

Specifications and Standards for Marine Hydraulic Systems and Components
2000-08-20
CURRENT
J1784_200008
This document lists military and industry specifications and standards that are considered to be of particular interest to designers of marine vehicle hydraulic systems. SAE AIR737 lists additional aerospace hydraulic documents which occasionally may have application in marine hydraulic systems. This report is intended to assist marine hydraulic system designers in identifying military and industry specifications and standards that are suitable for use in marine hydraulic systems. The documents are listed according to specific categories and components. Documents that can be identified with more than one category are listed accordingly. The user is cautioned to use the latest revision of each document and to review the document carefully to determine the suitability of the document for the particular applications.
Standard

Ship Systems and Equipment—Selection of Hydraulic Directional Control Valves
2002-03-28
HISTORICAL
J1783_200203
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
Standard

Ship Systems and Equipment - Selection of Hydraulic Directional Control Valves
2014-10-27
WIP
J1783
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
Standard

Ship Systems and Equipment - Selection of Hydraulic Directional Control Valves
2013-05-31
CURRENT
J1783_201305
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
Standard

SELECTION OF HYDRAULIC DIRECTIONAL CONTROL VALVES FOR MARINE VEHICLE APPLICATIONS
1993-12-01
HISTORICAL
J1783_199312
This SAE Hydrospace Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes which should be reserved to permit interchangeability, and environmental considerations.
123Next >Last >>
X