Search Results

The isostatic strength of porous cordierite ceramic monoliths plays an important role during canning and subsequent operation of automotive catalysts. Its value depends on wall porosity, cell geometry, skin thickness and morphology, monolith size and contour, and substrate/washcoat interaction. If the stresses induced by canning loads and closure speeds exceed the isostatic strength, the monolith may exhibit either crushing or shear type failure. This paper presents the room temperature isostatic strength data for coated and uncoated ceramic monoliths of different contour, size, and cell geometry. The applied isostatic load on the monolith is translated into stresses in the porous cell wall using both an analytical model and finite element analysis. It is found that the failure criteria are governed by the fundamental tensile and compressive strengths of the cell wall.

Both thermal and mechanical durabilities of porous cordierite ceramic monoliths depend on their strength and deformation behavior over the operational temperature range. In this paper we present the modulus of rupture data for EX-20, 400/6.8 square cell substrates of cordierite composition over the temperature range 70° - 2550°F. These data show a monotonic increase in four-point MOR up to 2200°F where its value approaches twice that at 70°F. The deformation mode is elastic and culminates in brittle fracture up to this temperature. Above 2200°F, however, the strength begins to decrease and the deformation mode becomes ductile; the brittle fracture is not observed. Instead, the surface crack propagates partially and is soon arrested. The failed specimen remains intact and shows permanent curvature. The transition from brittle to ductile behavior and the mechanism responsible for it will be discussed.

Significant advances in composition and the manufacturing process have led to thin wall cordierite ceramic substrates with low thermal mass, high surface area, and large open frontal area-properties that are critical for fast light-off, high conversion efficiency and low back pressure. Indeed, such substrates are ideal catalyst supports for meeting the ever-stringent emissions regulations, ala SULEV and ULEV, as demonstrated by recent performance data1. This paper focuses on the physical durability of 400/4 and 600/4 cordierite ceramic substrates. In particular, it presents strength, fatigue, and modulus data which influence the mechanical durability. In addition, it presents thermal expansion data which impact the thermal durability. Both of these durabilities are examined as a function of operating temperature.

The stringent emissions standards in the late 1990's like NLEV, ULEV and SULEV have led to major modifications in the composition and design of ceramic substrates. These changes have been necessitated to reduce cold start emissions, meet OBD-II requirements, and to ensure 100,000 mile durability requirement in a cost-effective manner. This paper presents the key advances in ceramic substrates which include lower thermal expansion, lighter weight, higher surface area and improved manufacturing process all of which help meet performance requirements. In addition to above benefits, the compressive and tensile strengths of lightweight substrates, as well as their thermal shock resistance, are found to be adequate following the application of high surface area alumina washcoat. The strength properties are crucial for ensuring safe handling of the substrate during coating and canning and for its long term mechanical durability in service.

As emissions regulations become more stringent, catalyst supports with higher cell density, smaller wall thickness, higher surface area and lower thermal mass become more desirable for faster light off and higher conversion efficiency. Simultaneously, however, washcoat formulation and loadings have to be adjusted to yield higher and more stable B.E.T. area at operating temperatures representative of close-coupled application. The thermal mass contribution of advanced washcoat system to catalyst supports with 600/4 and 900/2 cell structures may approach or even exceed that of uncoated substrates. Under such high washcoat loadings, the composite properties of advanced catalysts may be affected adversely in terms of their physical durability, notably in close-coupled application. This paper focuses on potential solutions to light-off performance and FTP efficiency, via optimization of substrate/washcoat interaction, geometric design and the mounting system.

The dual requirement of high conversion efficiency and 50K mile durability for cordierite ceramic converters is achievable through optimization of washcoat and catalyst formulation. This paper presents new data for high temperature physical properties, light-off performance, conversion efficiency and pressure drop through an oval cordierite ceramic converter with triangular cell structure and two different washcoat formulations; namely standard vs high-tech. Both of the washcoat systems have a beneficial effect on strength properties with nominal impact on thermal shock resistance. Both the standard and high-tech catalysts provide identical light-off performance for CO, HC and NOx conversion. The high-tech washcoat and catalyst system, in particular, provides consistently superior conversion efficiency for CO, HC and NOx. The pressure drop across the catalyst depends on hydraulic diameter and is only 8% higher for high-tech washcoat than for standard washcoat.

The dynamic fatigue data for two different cordierite ceramic wall-flow diesel filter compositions, EX-54 and EX-66, are obtained at 200° and 400°C using the 4-point bend test. These compositions offer larger mean pore size and experience lower pressure drop than the EX-47 composition, and hence are more desirable for certain applications. Their fatigue behavior in the operating temperature range is found to be equivalent or superior to that of EX-47 composition which helps promote filter durability. The fatigue data are used to arrive at a safe allowable stress, which would ensure the required 290K vehicle mile durability. The paper also discusses the impact of mean pore size on high temperature strength and fatigue properties and their effect on filter durability.

The high temperature creep data for radial specimens, cut from metal and ceramic substrates and subjected to compressive loads representative of mounting and thermal pressure are presented as function of load and temperature. These data show that the creep resistance of metallic specimens under sustained loading varies with temperature and is orders of magnitude lower than that of ceramic specimens. The observed creep deformation in metallic specimens reduces their open frontal area and hydraulic diameter with potentially adverse impact on pressure drop across the metallic substrate.

This paper reviews the development and successful application of ceramic catalytic converters for controlling automotive exhaust emissions. It presents the scientific rationale for designing the high surface area substrate to meet both performance and durability requirements. This is followed by a step-by-step design process for each of the converter components. The initial design stage focuses on understanding automaker's requirements and optimizing component design commensurate with them. The intermediate stage involves laboratory testing of converter components in simulated environment and ensuring component compatibility from durability point of view. The final design stage addresses the critical tests on converter assembly to ensure performance and field durability. In addition, it examines the necessary trade-offs and associated design modifications and evaluates their impact on warranty cost for system failure.

The large frontal area cordierite ceramic flow-through converter for diesel emissions must meet the 290K vehicle mile durability requirement, almost a six fold increase over that of automotive converters. This paper compares the size, the geometry and the operating conditions of automotive vs. diesel converters and suggests ways to design the converter system to meet the challenging durability requirements without compromising its performance with respect to back pressure and conversion efficiency. It is shown that the mechanical durability of the system, which is critical for meeting the 290K vehicle mile durability, can best be met by ensuring good compatibility between the substrate and washcoat and by designing a rugged packaging system with positive mounting pressure under all driving conditions.

The thermal durability of a large frontal area cordierite ceramic wall-flow filter for light-duty diesel engine is examined under various regeneration conditions. The radial temperature distribution during burner regeneration, obtained by eight different thermocouples at six different axial sections of a 75″ diameter x 8″ long filter, is used together with physical properties of the filter to compute thermal stresses via finite element analysis. The stress-time history of the filter is then compared with the strength and fatigue characteristics of extruded cordierite ceramic monolith. The successful performance of the filter over as many as 1000 regenerations is attributed to three important design parameters, namely unique filter properties, controlled regeneration conditions, and optimum packaging design. The latter induces significant radial and axial compression in the filter thereby enhancing its strength and reducing the operating stresses.

The high temperature strength and deformation behavior of ceramic and two different metal substrates were measured in the 25°-1200°C temperature range in uniaxial and biaxial bending using rectangular bars and circular discs, respectively, prepared from the substrates. The data show that both of the metal substrates exhibit permanent deformation and lose their load carrying capability by an order of magnitude above 800°C. The ceramic substrate, on the other hand, preserves its strength and behaves elastically over the entire temperature range exhibiting neither permanent deformation nor cell distortion. These data suggest that the upper use temperature for metal substrates could be significantly lower than that for ceramic substrates to meet 50-100K vehicle mile durability

This paper addresses the packaging design for monolithic cordierite ceramic converters to meet the new, stringent durability requirements of the 1990's, while minimizing warranty cost for the automaker. These objectives are best met by using a systems approach during the early phases of packaging design, i.e. by examining design interactions between the ceramic monolith, alumina coating, ceramic mat or wiremesh mounting material with seals, stainless steel can, heatshields, and associated peripheral components. Failure of any one of these components can prove detrimental to converter durability. In this paper we take advantage of overall understanding of the observed failure modes and individual component behavior, and present new data for optimizing the total converter durability through initial design. In particular, the impact of symmetric gas entry, monolith contour, clamshell anisotropy, mount density, stiffener ribs, and heatshield insulation on total durability is highlighted.

Stringent emissions standards for HC, CO and NOx have necessitated the development of thin wall ceramic substrates which offer higher surface area, larger open frontal area and lower thermal mass. Such substrates offer the additional benefit of being compact which make them ideal for manifold mounting in the engine compartment. These attributes of ceramic substrates, following washcoat and catalyst application, translate directly into quick light-off, high conversion efficiency and low back pressure. To preserve these advantages at high operating temperature and still meet 100,000 mile vehicle durability, the thermomechanical interaction between the substrate and thin wall washcoat system must be managed carefully via formulation, % loading and the calcination process. This paper presents the physical properties data for thin wall ceramic substrates before and after the washcoat application.

The emissions regulations for the decade of 1990s are not only more stringent but are also required of vehicles other than passenger cars, for example both diesel and gasoline trucks as well as motorcycles. These latter applications involve different operating conditions in terms of space velocities, temperature profiles, and vibrational loads than those typical of passenger cars [1]*. In addition, the performance and durability requirements for these applications call for lower back pressure and longer service life. Furthermore, the space availability and the operating temperature range differ vastly so as to require special packaging designs to meet the durability requirements. This paper provides new data for ceramic insulating mats, both intumescent and non-intumescent [2,3], and ceramic substrates with thin and thick walls and square and triangular cell geometries [4], which are under development for non-passenger car applications indicated above.

The typical ceramic catalyst support for automotive application has a total volume of 1640 cm3. Approximately 10% of this volume is subjected to tensile thermal stresses due to a radial temperature gradient in service [1]*. These stresses are kept below 50% of the substrate strength to minimize fatigue degradation and to ensure long-term durability [2]. However, the tensile strength measurements are carried out in 4-point bending using 2.5 cm wide x 1.2 cm thick x 10 cm long modulus of rupture bars in which the specimen volume subjected to tensile stress is merely 3.2 cm3 or 0.2% of the total substrate volume [3]. Thus, a large specimen population is often necessary (50 specimens or more) to obtain the strength distribution representative of full substrate. This is particularly true for large frontal area substrates for diesel catalyst supports with an order of magnitude larger stressed volume. In this paper, the modulus of rupture data are obtained as function of specimen size.

The motorcycle emissions regulations for both two-stroke and four-stroke engines, which are receiving worldwide attention, will go into effect in the very near future. To meet these regulations, the motorcycles will require a catalyst in conjunction with the muffler due to space limitations. The combination of high engine speeds, high vibrational acceleration, high HC and CO emissions, high oxidation exotherms, and stringent durability requirements, points to cordierite ceramic substrate as an ideal catalyst support. However, as an integral unit within the muffler, its packaging design must be capable of withstanding isothermal operating conditions which may exceed the upper intumescent temperature limit of the ceramic mat. This paper describes a durable packaging design for the ceramic catalyst which employs a hybrid ceramic mat, special end rings and gaskets, and high strength stainless steel can.

The stringent durability requirements approaching 100,000 vehicle miles for automotive substrates and 290,000 vehicle miles for large frontal area diesel substrates for 1994+ model year vehicles call for advanced packaging designs with thick ceramic mats and high mount densities. The latter result in high mounting pressure on the substrate and enhance its mechanical integrity against engine vibrations, road shocks and back pressure forces. A novel measurement technique which applies a uniform biaxial compressive load on the lateral surface of ceramic substrates, thereby simulating canning loads, is described. The biaxial compressive strength data obtained in this manner help determine the maximum mounting pressure and mat density for a durable packaging design. The biaxial compressive strength data for both round and non round substrates with small and large frontal area are presented.

The monolithic, large frontal area (LFA), extruded ceramic substrates for diesel flow-through catalysts offer unique advantages of design versatility, longterm durability, ease of packaging and low Cost [1, 2]*. This paper examines the effect of cell density and cell size on catalyst light-off performance, back pressure, mechanical and thermal durability, and the steady-state catalytic activity. The factors which affect these performance characteristics are discussed. Certain trade-offs in performance parameters, which are necessary for optimum systems design, are also discussed. Following a brief discussion of design methodology, substrate selection, substrate/washcoat interaction and packaging specifications, the durability data for ceramic flow-through catalysts are summarized. A total of over 18 million vehicle miles have been successfully demonstrated by ceramic LFA catalysts using the systems design approach.

Ceramic preconverters have become a viable strategy to meet the California LEV and ULEV standards. To minimize cold start emissions the preconverter must light-off quickly and be catalytically efficient. In addition, it must also survive the more severe thermomechanical requirements posed by its close proximity to the engine. The viability of the ceramic preconverter system to meet both emissions and durability requirements has also been reported recently(1,2). This paper further investigates the impact preconverter design parameters such as cell density, composition, volume, and catalyst technology have on emissions and pressure drop. In addition, different preconverter/main converter configurations in conjunction with electrically heated catalyst systems are evaluated. The results demonstrate that ceramic preconverters substantially reduce cold start emissions. Their effectiveness depends on preconverter design and volume, catalyst technology, and the system configuration.