Refine Your Search

Topic

Search Results

Article

Bosch developing new water-injection system for production engines

2015-06-02
The WI system is in pilot development with a Bosch customer. Test results to date show a reduction of fuel consumption at high loads and low rpm (up to 4% improvement on the NEDC cycle); reduction or avoidance of fuel enrichment and lower exhaust-gas temperatures at high loads and high rpm, and improved torque.
Article

Battling the high cost of EV batteries

2015-08-14
Huge factories and technical improvements are slowly pushing battery pack costs down toward the $100/kW·h turning point that's expected to democratize electrified vehicles.
Article

Chrysler's new Hellcat V8 gets 707-hp SAE rating

2014-05-21
The actual J1349 rating is more than 100 hp more than Chrysler engineers teased in late May. The automaker's first production supercharged V8 uses a Lysholm-type twin-screw supercharger supplied by IHI. The engine's high-output spec required extensive upgrading of engine reciprocating components to handle the extra loads.
Article

Sikorsky, Boeing debut future vertical lift dual-rotor design with SB>1 DEFIANT helicopter

2018-12-27
Sikorsky, a Lockheed Martin company (NYSE:LMT), in Stratford, Connecticut, and Boeing Defense, Space & Security (NYSE:BA) in Berkeley, Missouri, are introducing the SB>1 DEFIANT helicopter designed to fly with advanced agility and maneuverability at twice the speed and range of current conventional helicopters. Jointly developed for the U.S. Army’s Joint Multi-Role technology demonstrator program, the new rotorcraft design is intended to help inform the next generation of military helicopters as part of the U.S. Army's Future Vertical Lift (FVL) program.
Article

Integrating additive manufacturing into development, production – a free SAE webinar

2018-08-08
SAE International in Warrendale, Pa., is inviting members of the mobility engineering community to participate in the SAE Additive Manufacturing Webinar: Considerations When Integrating Additive Manufacturing into Aerospace and Ground Vehicle Development and Production Environments on Thursday, August 16, 2018 at 1 pm EDT/10 am PDT.
Article

Nvidia partners with AdaCore to secure self-driving firmware

2019-02-14
As mobility software becomes increasingly complex and connected, so does the risk of human error and system safety. To combat this, New York-based software company AdaCore will work with Nvidia Corporation of Santa Clara, California to apply open-source Ada and SPARK programming languages for select software security firmware elements in highly-complex, safety-critical systems like Nvidia’s DRIVE AGX automated and autonomous vehicle solutions.
Article

What we're driving: 2018 Mercedes-AMG E 63 S 4Matic+

2018-01-22
It isn’t every car maker that introduces you to your new car with a session on a tight and slippery test track - but it's useful education for exploiting the capabilities of the hugely powerful Mercedes-AMG E 63 S 4Matic+.
Article

SAE International issues first technical standards for aerospace additive manufacturing

2018-06-13
Jun 13, 2018 - The Aerospace Material Specification committee on Additive Manufacturing (AMS-AM) at SAE International in Warrendale, Pennsylvania, has released its first suite of Aerospace Material Specifications (AMS) additive manufacturing materials and process specifications. The new aerospace technical standards, now available from SAE, support the certification of critical aircraft and spacecraft parts, providing both a framework to protect the integrity of material property data and traceability within the aerospace supply chain.
Article

Additive manufacturing adoption up, growing rapidly in aerospace

2018-06-14
The 3D printing materials market will experience high double-digit growth in the aerospace industry through 2024, as manufacturers of aircraft and spacecraft vehicles and components increasingly adopt and reap the benefits of additive manufacturing, market analysts at Frost & Sullivan in Mountain View, California, predict.
Article

Hardide Coatings awarded two major UK aerospace funding grants

2018-08-23
Hardide Coatings was awarded funding from the National Aerospace Technology Exploitation Programme (NATEP) aerospace initiative. Hardide Coatings – which develops, manufactures and applies its proprietary Hardide-A coating – will use the funding to further develop two projects related to coating technology for aircraft components.
Article

JAXA MINERVA-II1 rovers achieve asteroid landing, autonomy, image and data capture

2018-09-24
Japan Aerospace Exploration Agency (JAXA) officials have released the first images from two unmanned rovers that landed safely on the surface of asteroid Ryugu just days ago. The compact MINERVA-II1 rovers, Rover-1A and Rover-1B, separated from the Hayabusa2 spacecraft on Sept. 21 at 13:06 Japan Standard Time (JST) and landed on Ryugu with a bounce.
Article

VR, COTS, NextGen and SESAR to take center stage at Flight Simulator Engineering and Maintenance Conference

2018-08-20
Hundreds of flight simulation experts from aerospace organizations worldwide – including airframe manufacturers, training device manufacturers (TDM), airlines, operators, and suppliers – will convene at RSi Visual Systems in Coppell, Texas, in September for the 2018 Flight Simulator Engineering and Maintenance Conference (FSEMC). Virtual reality (VR), motion cueing, ADS-B, pilot training for NextGen and SESAR, flight simulation training device (FSTD) technology insertion, and the pros and cons of commercial off-the-shelf (COTS) components top the list of discussion points for the annual conference.
Article

Advances in adhesive joining of structure components focus of new book from SAE International

2018-08-16
Adhesive joining of structural components will assume an increasingly important role in designing and manufacturing lightweight structures for aerospace platforms. The latest book from SAE International, Adhesive Joining of Structural Components: New Insights and Technologies explores recent advancements in adhesive bonding, used in the manufacture of primary aircraft fuselage and wing structures since 1945.
Article

Aireon to launch free, real-time emergency aircraft location service

2018-08-22
Aireon LLC, a global aircraft tracking and surveillance company in McLean, Va., is inviting aircraft operators, regulators, search-and-rescue organizations, and air navigation service providers (ANSPs) to pre-register for Aireon Aircraft Locating and Emergency Response Tracking (ALERT). Aireon ALERT, operated by the Irish Aviation Authority (IAA), is being touted as the aviation industry’s first and only free, global, real-time emergency aircraft location service, which is slated to begin service in Q1 2019.
Article

US Army tests avionics in effort to upgrade Black Hawk helicopters from analog to digital glass cockpit

2018-09-19
US Army officials and engineers continue work to modernize the defense organization’s fleet of Sikorsky UH-60 Black Hawk helicopter with a more modern digital cockpit, conducting a Limited User Test with two prototype aircraft at Redstone Arsenal, Ala. They selected for a Limited User Evaluation (LUE) a Crew Mission Station (CMS) aligned with The Open Group Future Airborne Capability Environment (FACE) technical standard that combines Core Avionics & Industrial Inc.’s (CoreAVI’s) compositor and graphics suite, Avalex smart display, Intel hardware, Wind River operating system, and Presagis server.
Article

Airbus Aerial harnesses satellites, UAS, helicopters, data analytics, and AI to support hurricane recovery efforts

2018-10-18
As the third strongest storm in the U.S. was striking the East Coast, Airbus Aerial technology was providing around-the-clock support analyzing the impact and aftermath of Hurricane Michael. Airbus Aerial uses a unique combination of satellites, manned aircraft and rotorcraft, and unmanned aircraft systems (UAS) together with data analytics technology and an artificial intelligence (AI), or machine learning, platform to help organizations supporting recovery efforts better understand and react to the storm as it rolled across the southeastern U.S. into the Gulf of Mexico.
Article

Demand up for composite-grade, high-performance plastics across aerospace, automotive

2018-08-23
Demand for high-performance plastics (HPPs) is up across the aerospace industry, driven by such key trends as growing performance requirements, increased use of additive manufacturing or 3D printing, supply chain globalization, and tightening environmental regulations. Growing passenger traffic coupled with the need to reduce emissions – being accomplished through lightweighting, engine downsizing, and vehicle electrification – present opportunities for HPPs, research analysts at Frost & Sullivan in San Antonio, Texas, explain.
X