Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Speech processing for vehicles: What's next?

2000-10-16
2000-01-CO77
The human voice is and remains the best form of communication. Therefore, spoken language interfaces to computers are a topic that has engaged engineers and speech scientists since the fifties. Once limited to the realm of science fiction, speech technology has now passed the threshold of practicality. The commercial deployment of these systems has already begun, although the applications are still specialized for certain purposes. This paper presents a speech recognition system that is particularly suited for drivers and passengers in a vehicle environment. The first chapter is describing a typical system design of today. Tens of thousands of these units are already in use. Thereafter a future system design will be described, in which the voice control of a navigation system is the most challenging problem. Finally the papers shows as an outlook, what comes next after the future. In particular, distributed speech processing systems will be used based on client-server architecture.
Technical Paper

Development and Evaluation of a Human Lower Extremity Model

2001-06-04
2001-06-0049
A finite element model of the human lower extremity has been developed in this study to simulate lower extremity behavior in frontal car crashes. Precise geometry of the human lower extremity and material properties of the hard and soft tissues were introduced to the model. The performance of the model was evaluated by comparing with dynamic loading test data using post mortem human subjects (PMHS). The comparison proved its ability to estimate dynamic responses of the human lower extremity. A study was conducted using the model to investigate possible factors of loading to the ankle and tibia. Force and moment were calculated with different time history profiles of footwell intrusion and pelvis motion. The results suggested that timing of maximum intrusion was important as well as its magnitude. It was also found that loading to the tibia could be affected not only by intrusion but also by pelvis motion.
Technical Paper

Parametric Modeling for Semi-trailer Tank Vehicle

2001-03-05
2001-01-3860
This paper treats the study case of semi-trailer structures by using Finite Element Method (FEM). It has the main proposal to stablish an automatic procedure for model preparation, that means: meshing generation, design loads and constraints applications, for a family of semi-trailer from 15000 to 35000 dm3 capacity, automatically built by the computer program GERTAP with a very few user interference. For this reason, the program does not demand any FEM expertise so that engineers can focus main construction problems without excessive concerning about model theoretical characteristics and model mistakes. At present moment, we are able to develop static analysis, with use of equivalent accelerations, in order to compute weighting, braking and turning loads. Soon, in a very near future, we are going to apply dynamics analysis that will simulate the actual bad conditions of Brazilian roads, so that fatigue-cracking problems could be prevented in design stage.
Technical Paper

Innovative Material Characterisation Methodology for Tyre Static and Dynamic Analyses

2020-09-30
2020-01-1519
Tyre structures are based on composite materials that constitute numerous layers, each providing specific properties to the tyre mechanic and dynamic behaviour. In principle, the understanding of the partial contributions of the individual layers requires knowledge of its mechanical properties. In case of non-availability of such critical information, it is difficult to perform tyre FE analyses. In the current work, a methodology is proposed to study the tyre static and dynamic behaviour to estimate its constituents properties based on the measured quasi-static responses of the tyre for certain specific loads. As a first step, a simplified tyre numerical model with standard rubber material properties is modeled that can substantively predict the necessary tyre static responses, i.e. radial, longitudinal and lateral stiffness. These responses are correlated with the physical tyre response that are measured using a kinematic and compliance (K&C) test rig in the laboratory.
Technical Paper

A Generic Testbody for Low-Frequency Aeroacoustic Buffeting

2020-09-30
2020-01-1515
Raising demands towards lightweight design paired with a loss of originally predominant engine noise pose significant challenges for NVH engineers in the automotive industry. From an aeroacoustic point of view, low frequency buffeting ranks among the most frequently encountered issues. The phenomenon typically arises due to structural transmission of aerodynamic wall pressure fluctuations and/or, as indicated in this work, through rear vent excitation. A possible workflow to simulate structure-excited buffeting contains a strongly coupled vibro-acoustic model for structure and interior cavity excited by a spatial pressure distribution obtained from a CFD simulation. In the case of rear vent buffeting no validated workflow has been published yet. While approaches have been made to simulate the problem for a real-car geometry such attempts suffer from tremendous computation costs, meshing effort and lack of flexibility.
Technical Paper

Numerical Investigation of Narrow-Band Noise Generation by Automotive Cooling Fans

2020-09-30
2020-01-1513
Axial cooling fans are commonly used in electric vehicles to cool batteries with high heating load. One drawback of the cooling fans is the high aeroacoustic noise level resulting from the fan blades and the obstacles facing the airflow. To create a comfortable cabin environment in the vehicle, and to reduce exterior noise emission, a low-noise installation design of the axial fan is required. The purpose of the project is to develop an efficient computational aeroacoustics (CAA) simulation process to assist the cooling-fan installation design. This paper reports the current progress of the development, where the narrow-band components of the fan noise is focused on. Two methods are used to compute the noise source. In the first method the source is computed from the flow field obtained using the unsteady Reynolds-averaged Navier-Stokes equations (unsteady RANS, or URANS) model.
Technical Paper

Innovative Acoustic Material Concept Integration Into Vehicle Design Process

2020-09-30
2020-01-1527
Integration of acoustic material concepts into vehicle design process is an important part of full vehicle design. The ability to assess the acoustic performance of a particular sound package component early in the design process allows designers to test various designs concepts before selecting a final products. This paper describes an innovative acoustic material concept which is easily integrated in a design process through the use of a database of Biot parameters. Biot parameters are widely used in the automotive industry to describe the physical interactions between the acoustics waves travelling through foams, fibers or metamaterials and the solid and fluid phase of these poro-elastic materials. This new acoustic material concept provides a combination of absorption, transmission loss and added damping on the panel it is attached to.
Technical Paper

Tire NVH Optimization for Future Mobility

2020-09-30
2020-01-1520
Vehicle NVH (Noise, Vibration and Harshness) is one of the most critical customer touchpoints which may lead to buying decisions. The importance of Noise inside the cabin is increasing day by day because of the new era of E-mobility and autonomous driving. Noise source could be the engine, powertrain, tyre, suspension components, brake system, etc. depending on driving conditions. Among these, tire noise is being identified as biggest contributor at constant mid-speed driving where engine and powertrain operate at minimum noise and wind noise is also at a moderate level. This driving condition becomes very significant for electric vehicles where engine noise is replaced by motor noise which is a tonal noise at very high frequency. This makes the improvement of tire noise levels quintessential for good cabin acoustic feel. This demands a proactive approach to develop low noise tire platforms for future mobility by leveraging research tools and best practices in the industry.
Technical Paper

Simulation Process for the Acoustical Excitation of DC-Link Film Capacitors in Highly Integrated Electrical Drivetrains

2020-09-30
2020-01-1500
The advancing electrification of the powertrain is leading towards new challenges in the field of acoustics. Film capacitors used in power electronics are a potential source of high-frequency interfering noise since they are exposed to voltage harmonics. These voltage harmonics are caused by semiconductor switching operations that are necessary to convert the DC voltage of the battery into three-phase alternating current for the electrical machine. In order to predict the acoustic characteristics of the DC-link capacitor at an early stage of development, a multiphysical chain of effects has to be addressed to consider electrical and mechanical influences. In this paper, a new method to evaluate the excitation amplitude of film capacitor windings is presented. The corresponding amplitudes are calculated via an analytical force based on electromechanical couplings of the dielectric within film capacitors.
Technical Paper

Advanced CAE Methods for NVH Development of High Speed Electric Axle

2020-09-30
2020-01-1501
The rate in the electrification of vehicles has risen in recent years. With intensified development more and more attention is paid to the noise and vibration in such vehicles especially from the EDU (Electric Drive Unit). In this paper the main NVH simulation process of a high-speed E-axle up to 30,000 rpm for premium class vehicle application is presented. The high speed, high-power density and lightweight design introduces new challenges. Benchmarking of different EDUs and vehicles leads to targets which can be used at the early stage of development as subsystem targets. This paper shows the CAE methodology which can be used to verify the design and guarantee the target achievement. Using CAE both source and structure can be optimized to improve the NVH behavior.
Technical Paper

Numerical Analysis of the Influences of Wear on the Vibrations of Power Units

2020-09-30
2020-01-1506
Numerical Analysis of the Influences of Wear on the Vibrations of Power Units Yashwant Kolluru, Rolando Doelling eBike Department Robert Bosch GmbH Kusterdingen, Germany yashwant.kolluru@de.bosch.com rolando.doelling@de.bosch.com Lars Hedrich Institute of Informatics Goethe University Frankfurt Frankfurt, Germany hedrich@em.informatik.uni-frankfurt.de The prime factor, which influences vibrations of electro-mechanical drives, is wear at the components. This paper discusses the numerical methods developed for abrasion, vibration calculations and the coupling between wear and NVH models of drive unit. Wear is a complex process and understanding it is essential for vibro-acoustics. The paper initially depicts finite element static model used for wear calculations. The special subroutines developed, aids in coupling the wear equations, various contact and friction formulations to the numerical model.
Technical Paper

Analytical Prediction of Acoustic Emissions From Turbocharger Bearings

2020-09-30
2020-01-1504
Turbochargers are progressively used in modern automotive engines to enhance engine performance and reduce energy loss and adverse emissions. Use of turbochargers along with other modern technologies has enabled development of significantly downsized internal combustion engines. However, turbochargers are major sources of acoustic emissions in modern automobiles. Their acoustics has a distinctive signature, originating from fluid-structure interactions. The bearing systems of turbochargers also constitute an important noise source. In this case, the acoustic emissions can mainly be attributed to hydrodynamic pressure fluctuations of the lubricant film. The developed analytical model determines the lubricant pressure distribution in the floating journal bearings used mainly in the modern turbocharges. This allows for an estimation of acoustic emissions.
X