Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Simulors, An Innovative Tool for Molds Development

1996-04-01
91A117
Mold designers and foundrymen spend a lot of time in developing molds without knowing exactly the phenomena which take place inside. Simulor, which has been used in an industrial environment for two years, offers the solution to make foundrymen understand what happens during the filling of the mold and the solidification of the part. Based on navier-stokes and heat transfer equations, simulor provides speed distribution and metal front evolution in the cavity and thermal map in the mold and the part. Some examples with different metals (cast iron, aluminum alloy) cast with various processes (sand or die casting, low pressure or gravity casting) will be given. This new tool will given foundrymen the opportunity to test the mold before having it machined and will also allow reduction in development delays.
Technical Paper

Integration and Validation of Sheet Metal Forming Simulation Computer Programs Into the Design Process

1996-04-01
91A121
In order to improve the design of drawn parts and to reduce the number of trial and error tests, Renault has undertaken the development and the validation of various finite element procedures and codes. This paper describes the function of each software and its level of integration into the design process. One of them is already an operational tool used be planners whilst the others are still in the validation phase. Selected examples show typical applications of the computer programs on automotive parts.
Technical Paper

Multifunctional Glasses for Automotive

1996-04-01
91A109
The windows of a vehicle have to satisfy the following driver and passenger needs concerning visibility and climate perception both related to active safety: transparency, reluctance, dazzling, glare and diffused light (scattering). All functions are related to visibility and so to the optics of glazing, solar control, deicing, defogging, demisting. The task of material science is to find the multifunctional glasses solving simultaneously problems of visibility, safety and comfort. Particular kind of glasses, colored, wired, coated, electrochromic, liquid crystal, photochromic can be already considered solutions which can operate passively or actively. The example of passive solar control and active heatable coated glasses is shown as a possible practical multifunctional glass very soon.
Technical Paper

The Development of Plastic Lenses for Vehicle Headlamps

1996-04-01
91A111
The pending changes in European law enabling the use of plastic lenses on vehicle headlamps provide an opportunity for further advancement of vehicle styling, lighting performance and aerodynamic efficiency. Plastic lenses can also provide a useful weight saving and contribute to energy savings during the lifetime of the vehicle. This paper discusses the current requirements, technologies and solutions for plastic lenses, and indicates the way this advance can impact on the evolution of lighting products.
Technical Paper

Evaluation of Advanced Aluminum Alloys and Mmc Obtained By Means of a Spray Depositon Approach

1996-04-01
91A112
The paper review some recent efforts, made by the aluminum industry, towards the development of new advanced alloys for aerospace applications; unconventional production technologies and MMC occupy an outstanding position in this context. Raid solidification processes are currently used for obtaining advanced alloys and, among them, the powder metallurgy route is one of the most commonly applied, since it has reached a considerable level of maturity. Experimental results of PM materials are shown and discussed in order to appreciate the potentialities of this class of materials and some recent further progress is shown: the spray deposition approach (osprey process). After having described the main features of the osprey process, some results obtained at the Department of Aerospace Engineering of Pisa about the development of high strength Al-alloy and MMC obtained by means of the osprey process are shown.
Technical Paper

Antiwear Properties and Applications of Thin Hard Coatings

1996-04-01
91A106
Different techniques, like PVD, CVD, ion implantation, are increasingly used to produce thin film layers of ceramic compounds to modify the surface properties of metals, carbides, ceramics or polymeric components for specialized conditions or in severe conditions of use. Carbides, nitrides, oxides, etc. have been deposited on the most varied supports to solve problems of high temperature, erosion, corrosion, diffusion and conductivity or electrical resistance. The fields of thin hard coating applications are: tools, dies, punches, mechanical components (for antiwear deposits), structures (for anticorrosion), optics (reflecting or absorbing layers) and microelectronics. In this paper we will present the principal characteristics of different thin hard coating layers and processes, and the principal applications in the anti-wear field.
Technical Paper

Practical Applications of Composite Exotic Hybrids and Their Structural Use in Vehicles

1996-04-01
91A098
An overview of high strength thermoset and thermoplastic composites will provide a basis of comparison with exotic hybrid composites. A specific theoretical application for a very high strength unibody application will be presented and test results evaluated. A critical overview of immediate applications will be presented and evaluated. In conclusion, it will be suggested that a uniform standard of performance be established for the practical application's requirements for these materials
Technical Paper

The Prediction of Shrinkage and Warpage in Plastics Injection Molded Auto Parts

1996-04-01
91A088
The article emphasizes the effect of flow on dimensional stability, mechanical properties and surface finish, and the close coupling of dimensional stability and mechanical properties. Warpage is the result of the balance between the structural stiffness of the part and the stress pattern resulting in variation in shrinkage due to area shrinkage, orientation, and thermal effects. The practical solution to warpage depends on the use of software to isolate the basic causes of warping which then leads to a logical solution procedure.
Technical Paper

A Driving Simulator Using Microprocessors

1988-03-01
871156
An inexpensive driving simulation system with sufficient fidelity has been developed. The system produces motion cues of four degrees of freedom, visual and auditory cues, and control feel on the steering wheel. This paper describes the features of this newly developed system and gives examples that demonstrate its effectiveness. The motion cues provided in this system are yaw, heave, and lateral and fore/aft accelerations. The lateral and fore/aft accelerations are simulated by tilting the simulator compartment. A computer-processed road image is given through a CRT monitor. The restoring torque of the steering wheel is produced by an electrical servosystem via a coil spring. Cruising sound is given in order to improve speed perception. Since the system uses digital computers, the vehicle characteristics are altered easily by merely rewriting the software. This enables us to simulate special vehicle dynamics such as front & rear wheel steering.
Technical Paper

U.S. and California Vehicle Emissions Control Programs Effectiveness and Application of Experience

1988-03-01
871148
Many areas of the world are in various stages of development which frequently includes a rapid increase in the motor vehicle population. As a result, some areas are beginning to show the effect of increased motor vehicle use on air pollution. The vehicle's contribution to California's air pollution has long been recognized and studied, and measures have been implemented to reduce emissions from motor vehicles. The history of light duty vehicle emission control in the South Coast Air Basin of California is reviewed. Emission reductions achieved, current levels, projected future emissions and the need for further emissions reductions from light duty vehicles are discussed. For other areas of the world where motor vehicles contribute to air pollution, suggestions are made which can improve the effectiveness of emission control efforts; which should be consistent with political and economic realities, and efforts to achieve international harmonization of standards.
Technical Paper

Use of Statistical Energy Analysis Method to Predict Sound Transmission Loss of Sound Barrier Assemblies

1999-05-17
1999-01-1707
Statistical Energy Analysis (SEA) method is used to predict Sound Transmission Loss (STL) of sound barrier assemblies (SBA) commonly used in automotive dashmat design. Tests are performed for dashmat plaques with and without design features, and SEA equations have been used for predicting transmission loss with acceptable accuracy below the interception (cavity resonance) frequency. For frequency range higher than interception point, the SEA software used overestimates STL. For dashmat tests with design features, test results and SEA predictions are generally agreeable.
Technical Paper

Modeling and Measurement of Occupied Car Seats

1999-05-17
1999-01-1690
An overview of model development for seated occupants is presented. Two approaches have been investigated for modeling the vertical response of a seated dummy: finite element and simplified mass-spring-damper methods. The construction and implementation of these models are described, and the various successes and drawbacks of each modeling approach are discussed. To evaluate the performance of the models, emphasis was also placed on producing accurate, repeatable measurements of the static and dynamic characteristics of a seated dummy.
Technical Paper

A New Wavelet Technique for Transient Sound Visualization and Application to Automotive Door Closing Events

1999-05-17
1999-01-1682
Transient automotive sounds often possess a complex internal structure resulting from one or more impacts combined with mechanical and acoustic cavity resonances. This structure can be revealed by a new technique for obtaining translation-invariant scalograms from orthogonal discrete wavelet transforms. These scalograms are particularly well suited to the visualization of complex sound transients which span a wide dynamic range in time (ms to s) and frequency (∼100Hz to ∼10kHz). As examples, scalograms and spectrograms of door latch closing events from a variety of automotive platforms are discussed and compared in light of the subjective rankings of the sounds.
Technical Paper

Design and Implementation of a Damping Material Measurement / Design System

1999-05-17
1999-01-1675
A hardware / software package is presented that is used to determine the dynamic mechanical properties of viscoelastic materials as a function of temperature and frequency. The material properties can then be used to aid in the design of surface damping treatments for various engineering structures.
Technical Paper

Case History: Engine Timing Gear Noise Reduction

1999-05-17
1999-01-1716
This paper describes the procedures used to reduce the tonal noise of a class eight truck engine timing gear train that was initially found to be objectionable under idle operating conditions. Initial measurements showed that the objectionable sounds were related to the fundamental gear mesh frequency, and its second and third harmonics. Experimental and computational procedures used to study and trouble-shoot the problem include vibration and sound measurements, transmission error analysis of the gears under light load condition, and a dynamic analysis of the drive system. Detail applications of these techniques are described in this paper.
Technical Paper

Noise Analysis of Automotive Alternators

1999-05-17
1999-01-1712
An extensive experimental study of noise generating mechanisms of two production models of automotive alternators is presented. It was established that aerodynamic noise (generated by cooling fans) is dominating at high speeds (above 3,000 rpm), while electromagnetic noise is the most intensive at low rpm. Two directions of noise reduction are proposed and validated: reduction of noise levels generated by alternators to be achieved by using axial flow fans for cooling instead of presently used bladed discs, and radical reduction of operating speed of alternators by using variable transmission ratio accessory drives.
X