Search Results

Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue, and Their Interactions Web Course RePlay

Anytime

Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.

Training / Education

Metals Bundle

Anytime

Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances. The following six eLearning courses are included in the Materials bundle. Each course is approximately one-hour in duration. See topics/outline for additional details. Introduction to Metals, Ferrous Metals, Nonferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel Exotic Alloys

Training / Education

Hardness Testing

Anytime

This eLearning course focuses on Rockwell and Brinell hardness testing and Vickers and Knoop microhardness testing. Participants will learn about how the tests are performed, test sample requirements, test parameter selection, and testing requirements. The course can be completed in 30 minutes.

Training / Education

Aluminum Metallurgy

Anytime

There are a wide variety of wrought aluminum alloys, each developed to provide specific properties. Getting the strength participants need in an aluminum alloy requires knowledge of the effects of alloy composition, cold-working, and heat treating on aluminum metallurgy and properties. A good understanding of how aluminum alloys behave and what can be done to modify their properties is critical for being more productive and profitable. The course takes about one hour to complete and consists of one module and a final exam. Also, quizzes and problems provide participants opportunities to apply the concepts taught.

Training / Education

High Temperature Materials Bundle

Anytime

Metals and alloys have different melting ranges depending on their chemistry. High temperature metals are much harder at room temperature, have exceptionally high melting points (usually above 2000 degree Celsius), and are resistant to wear, corrosion and deformation. The following five eLearning courses are included in the High Temperature Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.

Training / Education

Metallurgy of Steel: Principles

Anytime

Getting the strength and hardness you need in your steel requires knowledge of the effects of alloy composition and heat treating on steel properties. With knowledge of steel metallurgy you’ll be better able to: Select the most appropriate alloy and heat treating process for your application Evaluate suppliers Develop manufacturing processes Solve quality problems A good understanding of what can be done to modify the properties of steel is critical for being more productive and profitable.

Training / Education

Nickel Metal Hydride (NiMH) Hybrid Battery Systems

Anytime

This course from SAE International training partner, FutureTech*, is a MUST for everyone servicing hybrid vehicles. Nickel metal hydride (NiMH) battery systems continue primary battery technology in hybrid vehicles and have been since the 2000 model year.  If a technical professional doesn't know the fundamentals of NiMH operation it is impossible for them to perform a solid diagnosis or repair.  This course will concentrate on the NiMH technology, how it performs as it ages, how it can effect vehicle performance and fuel economy, and how to test it by using a scan tool.

Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Anytime

Ferrous metals contain iron and are prized for their tensile strength and durability. Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven eLearning courses are included in the Ferrous Materials Bundle: Steel and Cast Iron. Each course is approximately one-hour in duration. Modules include: Introduction to Physical Properties, Introduction to Mechanical Properties, Introduction to Metals, Hardness Testing, Ferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel.

Training / Education

Polymers Bundle

Anytime

This course discusses the properties and applications of thermoplastics, including an overview of the amorphous and semi-crystalline molecular regions found in thermoplastics, and describes common processing methods for thermoplastics, such as injection molding and extruding. Thermosets This course introduces participants to the key characteristics and types of thermosets as well as common processing methods. Courses listed above are available only as part of a TooliingU bundle.  Custom bundles of any five or more ToolingU courses are available upon request as a Corporate Learning Solution.

Training / Education

Nonferrous Metals Bundle

Anytime

Nonferrous materials are malleable, are non-magnetic, and have no iron content which gives them higher resistance to rust and corrosion. The following five eLearning courses are included in the Nonferrous Metals bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.

Training / Education

Introduction to Materials Bundle

Anytime

The following six eLearning courses are included in the Introduction to Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.

Training / Education

FEA Beyond Basics: Nonlinear Analysis Web Course RePlay

Anytime

Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy-to-use interfaces enabling design engineers to simulate problems formerly reserved for analysts. FEA Beyond Basics targets the FEA users who wish to explore those advanced analysis capabilities. It will demonstrate how to move past the ubiquitous linear structural analysis and solve structural nonlinear problems characterized by nonlinear material, large displacements, buckling or nonlinear connectors.

Training / Education

Materials to Electrodes

Anytime

This course provides a deep yet simple explanation of the operational principles of a rechargeable battery. The course spotlights the importance and discusses the fundamentals of the ‘electrochemical cell’ which is the heart of any battery system independent of the storage size. A direct link is set forth between the chemical nature of the cell components and the storage properties of interest such as ‘electromotive force’ and gravimetric & volumetric capacities. Specific attention is directed towards lithium-ion batteries by presenting more details about the materials of choice for the anode/cathode together with their synthesis methods.

Training / Education

Vehicle Sound Package Materials Web Course RePlay

Anytime

This four-session course provides a detailed understanding of the source–path-receiver relationship for developing appropriate sound package treatments in vehicles, including automobiles, commercial vehicles, and other transportation devices. The web course provides a detailed overview of absorption, attenuation (barrier), and damping materials and how to evaluate their performances on material, component, and vehicle level applications. A significant part of this course is the case studies that demonstrate how properly designed sound package materials successfully address vehicle noise issues.

Training / Education

AS7489: Aerospace Coating Fundamentals for ACAS Personnel

Anytime

This introductory AS7489 certification course provides both new and tenured aerospace coatings application specialists (ACAS) with technical training on safety and engineering compliance. Topics specific to the successful preparation and coatings application of aircraft substrates will be the central focus. This course is approved by Probitas Authentication and the successful completion of this course fulfills the training requirements for SAE AS7489 ACAS Course I Certification.

Training / Education

Adhesives Bundle

Anytime

Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.

Training / Education

Principles of Metallurgy

Anytime

This online course teaches the basic microscopic structures present inside of metals, how these structures and metal composition influence metal strength, and how these structures can be modified using common manufacturing processes to obtain specific mechanical properties. Several examples are presented to demonstrate how common alloying and manufacturing methods are used to modify the microscopic structures and properties of metals. It includes twelve modules that are five to 25 minutes in length, followed by a quiz.

Training / Education

Diesel Engine Technology

Anytime

Regulations and consumer expectations have shaped the modern diesel engine. Enhancements have resulted in more power, fuel efficiency, reliability, and lower emissions, an indication that diesels will remain popular in the future. This technology is most widely used in commercial applications, such as trucking, shipping, construction, busing, and more. Each year, many light and medium duty car and truck manufacturers introduce diesel vehicles worldwide. A fundamental knowledge of diesel technology is critical for anyone involved in the diesel engine support industry.

Training / Education

Solid-State Batteries

Anytime

This course focuses on the next generation electrolytes for Li-ion and Lithium metal batteries, the solid electrolytes, explaining why the shift to a solid electrolyte is necessary, which types of solid electrolytes exist, how they work and their specific features and benefits.

Training / Education

Tensile Testing

Anytime

This online course teaches about tensile testing of metals with a focus on how the testing is performed and tensile properties are measured. It includes one module followed by a quiz.