Refine Your Search

Topic

Author

Search Results

Standard

Ship Systems and Equipment--Selection of Hydraulic Directional Control Valves

2002-03-28
HISTORICAL
J1783_200203
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
Standard

Compressed Air for General Use--Part 1: classes

2001-11-15
CURRENT
J1649/1_200111
This part of SAE J1649/1 specifies quality classes of industrial compressed air for general use (e.g. for workshops, the construction industry, pneumatic transport, etc.) without consideration of the quality of the air when it is discharged from the compressor. The quality class of compressed air for a particular application has to be based on the mean value of several measurements carried out over a specific period of time and under defined operating conditions.
Standard

Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems

1989-10-01
HISTORICAL
J1990_198910
The purpose of this SAE Standard is to provide equipment specifications for CFC-12 (R-12) recycling equipment. This information applies to equipment used to service automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) air-conditioning (A/C) systems. Systems used on mobile vehicles for refrigerating cargo that have hermetically sealed systems are not covered in this document. The equipment in this document is intended for use with refrigerant that has been directly removed from, and intended to be returned to, a mobile A/C system. Should other revisions due to operational or technical requirements occur, this document may be amended.
Standard

Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems

1992-03-01
HISTORICAL
J1990_199203
The purpose of this SAE Standard is to provide equipment specifications for CFC-12 (R-12) recycling equipment. This information applies to equipment used to service automobiles, light trucks, and other vehicles with similar CFC-12 air-conditioning systems. Systems used on mobile vehicles for refrigerated cargo that have hermetically sealed systems are not covered in this document. The equipment in this document is intended for use with refrigerant that has been directly removed from, and intended to be returned to, a mobile air-conditioning system. Should other revisions due to operational or technical requirements occur, this document may be amended.
Standard

Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems

2011-05-26
CURRENT
J1990_201105
The purpose of this SAE Standard is to provide equipment specifications for CFC-12 (R-12) recycling equipment. This information applies to equipment used to service automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) air-conditioning (A/C) systems. Systems used on mobile vehicles for refrigerating cargo that have hermetically sealed systems are not covered in this document. The equipment in this document is intended for use with refrigerant that has been directly removed from, and intended to be returned to, a mobile A/C system. Should other revisions due to operational or technical requirements occur, this document may be amended.
Standard

Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems

1999-02-01
HISTORICAL
J1990_199902
The purpose of this SAE Standard is to provide equipment specifications for CFC-12 (R-12) recycling equipment. This information applies to equipment used to service automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) air-conditioning (A/C) systems. Systems used on mobile vehicles for refrigerating cargo that have hermetically sealed systems are not covered in this document. The equipment in this document is intended for use with refrigerant that has been directly removed from, and intended to be returned to, a mobile A/C system. Should other revisions due to operational or technical requirements occur, this document may be amended.
Standard

Self-Propelled Sweepers and Cleaning Equipment

1997-10-01
HISTORICAL
J2130_199710
This SAE Standard applies to all self-propelled machines that are designed to sweep material from highways, parking lots, and floors in non-residential buildings. Primary methods for removing material can be by mechanical means, pneumatic, washing system, or a combinations. To identify self-propelled cleaning equipment, which are grouped into street and industrial sweepers and scrubbers.
Standard

Self-Propelled Sweepers and Cleaning Equipment

2009-02-10
CURRENT
J2130_200902
This SAE Standard applies to all machines that are designed to sweep material from highways, parking lots, and inside buildings. Primary methods for removing material can be by mechanical means, pneumatic, or combinations of both.
Standard

Self-Propelled Sweepers and Cleaning Equipment

1993-04-01
HISTORICAL
J2130_199304
This SAE Standard applies to all machines that are designed to sweep material from highways, parking lots, and inside buildings. Primary methods for removing material can be by mechanical means, pneumatic, or combinations of both.
Standard

Directional Drilling Planning and Mapping Nomenclature

2007-08-30
HISTORICAL
J2583_200708
This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022. This is a compilation of terms and definitions commonly associated with the planning and mapping of underground pipe and utility installation by using horizontal earthboring machines.
Standard

Directional Drilling Planning and Mapping Nomenclature

2002-06-28
HISTORICAL
J2583_200206
This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022. This is a compilation of terms and definitions commonly associated with the planning and mapping of underground pipe and utility installation by using horizontal earthboring machines.
Standard

Mayday Industry Survey Information Report

1998-09-01
CURRENT
J2352_199809
This SAE Information Report is a summary of information obtained by way of survey conducted during the 2Q and 3Q of 1997 of MAYDAY system manufacturers. The data represented here has been condensed from the original survey that was conducted by telephone interviews and faxes. The information contained within is limited to technical data as it pertains to vehicle and on-board MAYDAY system operations. It does not contain business, marketing, or any proprietary technical information. The complete survey results are in the possession of the SAE. The purpose of this survey was to determine whether the general concept and architecture on which the SAE J2313 MAYDAY Message Set was being developed is consistent with those of current MAYDAY system hardware manufacturers. The survey was not intended for MAYDAY service providers or public service answer points and emergency service providers.
Standard

Ship Systems and Equipment--General Specification for Filter Elements--Hydraulic and Lube Oil Service

2000-03-12
HISTORICAL
J2321_200003
Scope This SAE Standard covers disposable hydraulic and lube oil filter elements. This document is a general performance specification for filter elements and identifies performance criteria and test methods. Associated specification sheets (SAE J2321-1, J2321-2, and J2321-3, etc.) define configuration and performance requirements for specific elements. Classification Sizes, configurations, and part identifying numbers for filter elements shall be as specified in the applicable specification sheets.
X