Refine Your Search

Topic

Search Results

Standard

Self-Propelled Sweepers Sweep-Ability Performance

2014-05-07
CURRENT
J1702_201405
This SAE Standard establishes a method of disclosing the sweep-ability performance of self-propelled sweepers that use broom means for sweeping and collection, together with either a mechanical- or pneumatic-conveyance system for the transfer of “sweepings” into a collection hopper.
Standard

Ship Systems and Equipment--Selection of Hydraulic Directional Control Valves

2002-03-28
HISTORICAL
J1783_200203
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
Standard

Self-Propelled Sweepers and Cleaning Equipment

1997-10-01
HISTORICAL
J2130_199710
This SAE Standard applies to all self-propelled machines that are designed to sweep material from highways, parking lots, and floors in non-residential buildings. Primary methods for removing material can be by mechanical means, pneumatic, washing system, or a combinations. To identify self-propelled cleaning equipment, which are grouped into street and industrial sweepers and scrubbers.
Standard

Directional Drilling Planning and Mapping Nomenclature

2007-08-30
HISTORICAL
J2583_200708
This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022. This is a compilation of terms and definitions commonly associated with the planning and mapping of underground pipe and utility installation by using horizontal earthboring machines.
Standard

Guidelines for Liquid Level Indicators

2007-04-30
HISTORICAL
J48_200704
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
Standard

Lubricants, Industrial Oils, and Related Products - Classification

2018-08-29
CURRENT
MS1000_201808
This index provides an overview of lubricants and symbols for the purpose of assisting the user in the identification of the appropriate product and relevant SAE specification. The aim is to better determine the best lubricant to be used for a particular application. If containers used for shipping lubricants are also to be marked, the same identification and symbols should be used. See also ISO 5169 Machine tools - Presentation of lubrication instructions.
Standard

Ignition Distributors - Marine

2016-11-15
CURRENT
J1294_201611
This SAE Recommended Practice covers distributors used on marine engines. NOTE: This includes devices referred to as high voltage switches used for distributing high voltage to the appropriate spark plugs but does not contain any crank position sensing function.
Standard

Electrical Propulsion Control - Off-Road Dumpers

2013-02-21
CURRENT
J1299_201302
This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).
Standard

Off-Road Rim Maintenance Procedures and Service Precautions Diameter Code 20 and Larger

2019-02-21
CURRENT
J1337_201902
This SAE Recommended Practice covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, demounting, maintenance, and service of a particular type, style, or design of off-road rim assembly can be obtained by consulting rim or tire manufacturers or distributors. These procedures and service precautions should be considered in preparation of the machine service manual, the operator's manual, and workplace procedures.
Standard

Torque Ratings for Power Take-off Mounting Pads

2003-07-25
HISTORICAL
J2662_200307
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

Numbering System for Taps

1990-11-01
HISTORICAL
J2123_199011
This SAE Recommended Practice provides a systematic method for the identification of ground thread taps for inch sizes up to 9.999 in with a Maximum Thread-per-Inch of 99.9, and Metric sizes up to 99.9 mm with a Maximum pitch of 9.99 mm. It is intended to assist in the cataloging and supplying of these tools. It is not intended for ACME, Buttress, or similar type thread forms. NOTE 1—Caution must be taken when assigning codes to prevent specifying taps that cannot be physically or economically manufactured. NOTE 2—The Code Number coming from the manufacturer MUST reflect the actual tool construction. NOTE 3— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Single Diameter Drills

1990-11-01
HISTORICAL
J2122_199011
This SAE Recommended Practice provides a systematic method for the identification of single diameter drills. It is intended to assist in the cataloging and supplying of these tools. NOTE 1—Caution must be taken when assigning codes for designators to prevent specifying drills that cannot be physically or economically manufactured. NOTE 2—In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
X