Search Results

NASA's Deep Space Network (DSN) uses high-power transmitters on its large antennas to communicate with spacecraft of NASA and its partner agencies. The prime reflectors of the DSN antennas are parabolic, at 34m and 70m in diameter. The DSN transmitters radiate Continuous Wave (CW) signals at 20 kW - 500 kW at X-band and S-band frequencies. The combination of antenna reflector size and high frequency results in a very narrow beam with extensive oscillating near-field pattern. Another unique feature of the DSN antennas is that they (and the radiated beam) move mostly at very slow sidereal rate, essentially identical in magnitude and at the opposite direction of Earth rotation.

The exploration of Mars is a major thrust of NASA. Some of the important goals of this exploration are the search for life; understanding the planet's evolution by in-situ and remote scientific measurements; developing an inventory of useful resources, including accessible water; and sample return as a precursor to human exploration. One of the key challenges of Mars's exploration hard-ware--- rovers, landers, probes, and science instruments -- is to be able to survive the planet's harsh environment on and below surface. This paper discusses the thermal challenges posed by relatively large temperature variations, analyses and experimental work done at JPL to address these challenges.

This paper entails the design and development of a NASA testing system used to simulate wheel operation in a lunar environment under different loading conditions. The test system was developed to test the design of advanced nonpneumatic wheels to be used on the NASA All-Terrain Hex-Legged Extra-Terrestrial Explorer (ATHLETE). The ATHLETE, allowing for easy maneuverability around the lunar surface, provides the capability for many research and exploration opportunities on the lunar surface that were not previously possible. Each leg, having six degrees of freedom, allows the ATHLETE to accomplish many tasks not available on other extra-terrestrial exploration platforms. The robotic vehicle is expected to last longer than previous lunar rovers.

ChemCam is one of the 10 instrument suites on the Mars Science Laboratory, a martian rover being built by Jet Propulsion Laboratory, for the next NASA mission to Mars (MSL 2009). ChemCam is an instrument package consisting of two remote sensing instruments: a Laser-Induced Breakdown Spectrometer (LIBS) and a Remote Micro-Imager (RMI). LIBS provides elemental compositions of rocks and soils, while the RMI places the LIBS analyses in their geomorphologic context. Both instruments rely on an autofocus capability to precisely focus on the chosen target, located at distances from the rover comprised between 1 and 9 m for LIBS, and 2 m and infinity for RMI. ChemCam will help determine which samples, within the vicinity of the MSL rover, are of sufficient interest to use the contact and in-situ instruments for further characterization.

Rovers will play a vital role in upcoming Mars missions by enabling science activities at a wide variety of locations even kilometers away from the landing site. On-going technology development efforts at the Jet Propulsion Laboratory include the Long Range Science Rover Task which is prototyping and demonstrating rover technology capable of traversing several kilometers over the Martian surface carrying out a wide variety of science activities. This paper discusses the operational requirements for Mars science rovers and a current prototype Mars rover called Rocky 7.

The Viking project is managed by the Viking project office at Langley Research Center for the National Aeronautics and Space Administration. Two Viking spacecraft will be individually launched on a new Titan IIIE/Centaur D-1T launch vehicle in August 1975. The method for the establishment of spacecraft sine vibration test levels prior to availability of any Titan IIIE/Centaur D-1T flight data by use of both computer simulations and data from previous Titan and Atlas Centaur vehicles is described. The specification level is compared with actual flight data obtained from a proof flight launch of the Titan IIIE/Centaur D-1T and a Viking dynamic simulator in January 1974. An objective of the proof flight launch was to obtain estimates of the flight loads and environments. The criteria used to minimize the structural weight that would result from an unmodified application of a sine test environment are described.

“Today's electronic components rely on principles of physics and science with no manufacturing precedence and little data on long term stability and reliability.” [1] Yet many are counting on their reliable performance years if not decades into the future, sometimes after being literally abandoned in barns or stored neatly in tightly sealed bags. What makes sense? To toss everything away, or use it as is and hope for the best? Surely there must be a middle ground! With an unprecedented number of missions in its future and an ever-tightening budget, NASA faces the daunting task of doing more with less. One proven way for a project to save money is to use already screened and qualified devices from the spares of its predecessors. But what is the risk in doing so? How can a project reliably count on the value of spare devices if the risk of using them is not, in itself, defined?