Refine Your Search

Date

Date

Automotive Pumps Diesel Fuel Injection Equipment Standards Committee

Search Results

Viewing 1 to 16 of 16
1
Sort by relevance
Standard

DIESEL FUEL INJECTION PUMP—VALIDATION OF CALIBRATING NOZZLE HOLDER ASSEMBLIES
1988-04-01
HISTORICAL
J1549_198804
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2015-09-22
HISTORICAL
J1549_201509
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2021-03-17
CURRENT
J1549_202103
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Engines - Fuel Injection Pump Testing
2016-05-10
HISTORICAL
J1668_201605
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines—Fuel Injection Pump Testing
1999-04-16
HISTORICAL
J1668_199904
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines - Fuel Injection Pump Testing
2021-03-17
CURRENT
J1668_202103
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Fuel Injection Pumps—High Pressure Pipes (Tubing) for Testing
2002-10-25
HISTORICAL
J1418_200210
This SAE Standard specifies the dimensional requirement of a range of high pressure pipes for use in the bench testing and setting of fuel injection pumps. Only dimensions and requirements affecting the hydraulic characteristic of the pipes are defined. Other requirements, such as the type of end connections and shape of the pipes when bent, are not included. These depend on the connections provided at pump outlets and injector inlets, and on the design features of individual pumps and test benches.
Standard

DIESEL INJECTION PUMP TESTING—PART 1: CALIBRATING NOZZLE AND HOLDER ASSEMBLIES
1991-05-01
HISTORICAL
J968/1_199105
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard

DIESEL INJECTION PUMP TESTING—PART 1: CALIBRATING NOZZLE AND HOLDER ASSEMBLIES
1995-06-27
HISTORICAL
J968/1_199506
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard

DIESEL INJECTION PUMP TESTING—PART 2: ORIFICE PLATE FLOW MEASUREMENT
1995-06-27
HISTORICAL
J968/2_199506
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard

Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
2002-12-20
HISTORICAL
J968/2_200212
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968-1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968-1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard

Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
2015-09-22
HISTORICAL
J968/2_201509
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968-1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968-1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard

Diesel Injection Pump Testing—Part 1: Calibrating Nozzle and Holder Assemblies
2002-12-20
HISTORICAL
J968/1_200212
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard

Diesel Injection Pump Testing - Part 1: Calibrating Nozzle and Holder Assemblies
2015-09-22
HISTORICAL
J968/1_201509
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard

DIESEL INJECTION PUMP TESTING—PART 2: ORIFICE PLATE FLOW MEASUREMENT
1991-05-01
HISTORICAL
J968/2_199105
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard

Diesel Injection Pump Testing - Part 1: Calibrating Nozzle and Holder Assemblies
2021-03-17
CURRENT
J968/1_202103
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
1
X