Refine Your Search

Topic

Author

Affiliation

Search Results

Book

The Practical Reference Guide for Corrosion of Welds - Causes and Cures

1999-01-01
Expert witness and AWS lecturer Ted V. Weber draws upon his lengthy experience as a materials troubleshooter for DuPont to present this succinct introduction to basic corrosion mechanisms. It includes pitting, intergranular corrosion, stress corrosion cracking, erosion, crevice and galvanic corrosion, and selective leaching. Full color digital photos illustrate the costly destruction caused by corrosion in welds. The author offers clear advice on how to avoid and correct corrosion, including alloying for resistance.
Book

The Practical Reference Guide for Welding Titanium

1999-01-01
Titanium need not be all that hard to weld! In industrial sectors the common opinion is that titanium alloys are difficult to weld. While it is true that titanium alloys can be embrittled by carless welding techniques, it is equally true that these materials are much more weldable than their reputation suggests. This reference guide discusses the difficulties that originate from several basic sources when welding titanium and titanium alloys. The high reactivity of titanium with other materials, poor cleaning of parts before joining, and inadequate protection during welding can lead to contamination, porosity and embrittlement of the completed joints. Topics Covered: • Weld Cleaning • Gas Shield Arc Welding Processes • Gas Tungsten Arc Welding • Gas Metal Arc Welding • Plasma Arc Welding • Other Welding Processes
Book

Factory Man

2009-02-16
Factory Man is about James Harbour and the epic struggle of the U.S. auto industry to catch up to Japan in quality and productivity. Harbour is a former manufacturing executive who, partly by chance, became the first U.S. expert to study Toyota's operations in Japan. Harbour's consulting firm, Harbour & Associates has gained worldwide recognition for its annual public studies of factory productivity. The Harbour Report is the essential annual scorecard of who is winning the productivity race in the U.S. In 1981, Harbour reported that Toyota could offer a small car for sale in the U.S. at a production cost of $1,500-$1,700 less than the Detroit automakers at that time, a cost advantage of about 30 percent. The impact on Detroit was atomic, and launched the painful, historic effort by the Big Three to catch up, which continues today. James Harbour's story, blunt and accessible, includes a detailed description of how Detroit went astray, beginning right after World War II.
Book

Introduction to Dynamics of Rotor-Bearing Systems

2001-01-01
This book is written as an introduction to rotor-bearing dynamics for practicing engineers and students who are involved in rotor dynamics and bearing designs. The goal is to provide a step-by-step approach to the understanding of fundamentals of rotor-bearing dynamics. Therefore, the emphasis is on the basic principles, phenomena, modeling, theory, and interpretations of the results. Introduction to Dynamics of Rotor-bearing Systems includes numerous examples, from a single-degree-of-freedom system to complicated industrial rotating machinery, which serve to illustrate fundamental dynamic behaviors. The concepts in the text are reinforced by parametric studies and numerous illustrative examples and figures.
Book

Counterfeit Electronic Parts: Supply Chains at Risk (DVD)

2015-04-15
"Spotlight on Design" features video interviews and case study segments, focusing on the latest technology breakthroughs. Viewers are virtually taken to labs and research centers to learn how design engineers are enhancing product performance/reliability, reducing cost, improving quality, safety or environmental impact, and achieving regulatory compliance. Just how prevalent is the problem of counterfeit electronic parts? What are the consequences of using sub-par components in safety or mission critical systems? The Federal Aviation Administration estimates that 2% of the 26 million airline parts installed each year are counterfeit, accounting for more than 520,000 units, maybe more.
Book

Welding Aluminum - Questions and Answers, 2nd Edition

2010-01-01
This practical guide to troubleshooting aluminum welding-related problems is based on real-life questions and answers from author Tony Anderson's long-running column in the Welding Journal. The 2nd edition of this book was produced in order to include additional sections that enhance the already comprehensive material that was included in the 1st edition.
Standard

LED Replacement Light Sources for Halogen Light Sources

2017-06-28
WIP
J3145
This SAE Recommended Practice is intended as a guide for specifying LED Substitute Light Sources as Equivalents for corresponding RID filament light sources and is subject to change to keep pace with experience and technical advances. This document defines criteria for technical equivalence in order to make a substitution of a filament light source with an LED light source without compromising the performance of the RID device.
Video

Career Counselor Series: Effective Communication

2017-09-19
Alyson Lyon, executive leadership coach, discusses the value of effective and efficient communication. SAE Members can view the full version by logging into the Member Connection. Not a Member? Join us today at sae.org/join.
Video

Goal Setting Strategies

2016-03-01
Alyson Lyon, Executive Leadership Coach, discusses how accurately defining goals leads to success. Members can view the full version by logging into the Member Connection here Not a Member? Get a taste of the Member Connection and join at connection.sae.org.
Video

Time Management Strategies

2016-03-01
Alyson Lyon, Executive Leadership Coach, explains how the most successful people manage their time. Members can view the full version by logging into the Member Connection here Not a Member? Get a taste of the Member Connection and join at connection.sae.org.
Book

Total Welding Management

2005-01-01
This guide provides a systematic approach to welding excellence and cost reduction. Drawing on more than 50 years of welding experience, author Jack R. Barckhoff, P.E., gives you a step by-step plan to maximize the productivity and cost efficiency of your welding operation. Implementing the principles and concepts in this book could save you $15,000 to $35,000 annually per welder, and realize team-wide productivity gains of 20 percent to 50 percent. This book explains the management principles, structure, and details you need to transform your welding operation from a cost center into a profit center. A must-read for supervisors, managers, and executives.
Technical Paper

Surface Treatments and Characterization of Electroplated and Hot Dip Galvanized Steel Sheets

1996-04-01
91A126
Protection of surfaces is a critical factor in determining the extended service life of a structure in polluted and aggressive environments. In particular, a rapid growth of the technology for the protecting coating of cold rolled steel is experienced, for the use in transport, electric housewares, building and industrial plants. Numerous changes have taken place in the production of zinc coatings on steel in order to improve the corrosion resistance using zinc alloy platings. Our research group collected from the international production a number of selected galvanized steel samples, including electrodeposited zinc alloys, multilayer coatings, hot dip galvanized steels. On the selected materials we established and analyzed morphology, composition, crystal structure, impurity content and distribution, using many surface microanalysis techniques.
Technical Paper

New Materials and Experiences for the Industrialization of Pu Structural Rim Technology

1996-04-01
91A122
Processes involving use of reactive polymers received recently considerable attention also for producing components suitable for automotive structural applications. In particular polyurethane structural RIM technology seems to be the route of choice in terms of productivity, reliability and physico- mechanical performances in order to fit the automotive industry needs in the production of parts requiring superior load bearing properties. In this frame the development of long pot life snap-cure resins, fast and effective reinforcement preforming techniques as well as the development of computerized provisional processing methodologies are of paramount importance in view of industrialization of the technology. In this paper a description of the work carried out by Enichem Montedipe and Montedison is given. In particular a new family of PU systems, based on special isocyanate variants, is reported.
Technical Paper

State of the Art in the Use of Stainless Steel for Bus and Car Parts Manufacture

1996-04-01
91A127
The paper describes recent developments in the use of stainless steel to make the parts of buses which are most liable to corrosion. Sheet metal is used for the outer panelling, and square and rectangular tubes for the body. The types of steel used and their fabrication are analyzed. Finally, a brief description is given of the stainless steels used to make car exhaust systems.
Technical Paper

The Modeling of Mold Filling in Structural Reaction Injection Molding

1996-04-01
91A118
The main use of FRC in automobiles, with the exception of a few specialized low volume vehicles, has been until now in semistructural parts. One of the most promising process in development today, that may play major role in future structural composite fabrication, is based on SRIM technology. The rapid and extensive introduction of this process goes also through the development of deeper theoretical knowledge of the process and the development of computer simulation to aid mold design and choice of proper processing parameters. To contribute SRIM advancement, a preliminary model has been developed for viscosity changes, extent of the reaction and temperature rises, associated with the mold filling stage, as well as a simple software to evaluate the pressure drop through different combinations of reinforcements.
Technical Paper

Simulors, An Innovative Tool for Molds Development

1996-04-01
91A117
Mold designers and foundrymen spend a lot of time in developing molds without knowing exactly the phenomena which take place inside. Simulor, which has been used in an industrial environment for two years, offers the solution to make foundrymen understand what happens during the filling of the mold and the solidification of the part. Based on navier-stokes and heat transfer equations, simulor provides speed distribution and metal front evolution in the cavity and thermal map in the mold and the part. Some examples with different metals (cast iron, aluminum alloy) cast with various processes (sand or die casting, low pressure or gravity casting) will be given. This new tool will given foundrymen the opportunity to test the mold before having it machined and will also allow reduction in development delays.
Technical Paper

Integration and Validation of Sheet Metal Forming Simulation Computer Programs Into the Design Process

1996-04-01
91A121
In order to improve the design of drawn parts and to reduce the number of trial and error tests, Renault has undertaken the development and the validation of various finite element procedures and codes. This paper describes the function of each software and its level of integration into the design process. One of them is already an operational tool used be planners whilst the others are still in the validation phase. Selected examples show typical applications of the computer programs on automotive parts.
Technical Paper

Glass Reinforced Thermoplastic Composites: Effects of Ribs and Different Types of Reinforcement on the Characteristics of the Molded Part

1996-04-01
91A119
Compression molding of thermoplastic sheets, consolidated or non- consolidated, reinforced with glass fibers (GMT, GRT) is applied as an economic production process in the automotive industry. The aim of this work is to evaluate how the physical and mechanical strength characteristics depend on the presence or absence of ribs and how component performance may be changed by modifying the molding parameters, altering the content and orientation of the reinforcement fibers in the ribbed areas. For this purpose, two statistical designs will be considered, the first carried out on a box type component without ribs, the second on the same component with a set of internal ribs. Two different materials with a PP matrix will be tested, a GMT reinforced with continuous random glass fibers and a 12 mm random glass fibers composite.
X