Refine Your Search

Topic

Author

Affiliation

Search Results

Book

Multiaxial Fatigue of an Induction Hardened Shaft

1999-10-15
Prepared under the auspices of the SAE Fatigue Design and Evaluation Committee. This book focuses on the fatigue and fracture analysis of an induction hardened shaft subjected to combined bending and torsion. It includes the complexities of varying material and hardness distribution through the thickness of the shaft along with internal residual stresses. Subjects covered include: Sample definition and experimental data Material and process information Realistic load histories Understanding of the state of stress Analytical techniques and tools
Book

SAE Fatigue Design Handbook

1997-09-12
Prepared under the auspices of the SAE Fatigue Design and Evaluation Committee. The SAE Fatigue Design Handbook covers, in a single source, current technologies and procedures on all of the major elements of fatigue design. Intended as a handbook for industrial use, this book describes the major elements of the fatigue design process and how those elements must be tied together in a comprehensive product evaluation. Using this handbook will save the design engineer time, while ensuring understanding of the important elements of the fatigue design process. Significant Updates On: Fatigue Life Prediction (New sections on multiaxial effects and statistical aspects) Vehicle Simulation Structural Life Evaluation Material Properties Fatigue Performance
Book

A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design

2009-01-01
Get a comprehensive overview of lubricant technology and its use in formulating new lubricants. This unique, new ASTM manual is written from the perspectives of both chemists and lubrication engineers, and therefore places equal emphasis on the chemistry and the formulation of lubricants. In addition it includes additive technology that is used in petroleum exploration, refining, and fuels. Manual 59 complements ASTM's Fuels and Lubricants Handbook (Manual 37) in that it integrates the information in the Handbook in a manner that will be especially useful to practicing lubrication engineers.
Book

SAE Manual on Design and Manufacture of Torsion Bar Springs and Stabilizer Bars

2000-07-01
This editorial review of J784a is based upon decades of experience in the practical application of x-ray diffraction residual stress measurement methods in thousands of individual applications. J784 is a classic document. It serves as the only recognized standard for residual stress measurement available. The purpose of this revision is not to incorporate all of the research in the fields of x-ray and neutron diffraction but to focus on the practical applications of x-ray diffraction techniques useful to members of the automotive engineering related industries.
Book

SAE Ferrous Materials Standards Manual - 2004 Edition

2004-07-21
The 2004 SAE Ferrous Materials Standards Manual provides a comprehensive compilation of the SAE Technical Reports relating to specifications, testing, and defining of Ferrous Materials. These standards, Recommended Practices, and Information Reports have been developed by Carbon and Alloy Steels Committee, Metals Test Procedures Committee, Automotive Iron and Steel Castings Committee, Sheet and Strip Steel Committee, Elevated Temperature Properties of Ferrous Metals Committee who comprise the Metals Technical Executive Committee (MTEC). MTEC also governs the other Standards, Recommended Practices, and Information Reports that have been developed by prior division that are now inactive. As an informational guide and background for the values and procedures in the SAE Technical Report, HS-30 also includes Examples of Related SAE Technical Papers.
Book

The Practical Reference Guide to Welding Metallurgy - Key Concepts for Weldability

1999-01-01
If you’re not ready for the depth of George Linnert’s "Welding Metallurgy", then this guide is for you. An intelligent introduction for the engineer new to welding, and the up-and-coming senior technician, this guide offers some basics that will aid the non-metallurgist in understanding why problems occur, and how to avoid them. Tables and figures support these topics: • Metal Structures • Metal Forms • Diffusion • Solid Solubility • Residual Stress • Shielding and Purging • Phase Transformation • Hardness and Hardenability • Grain Size • Stainless Steels • Aluminum and its Alloys • Copper and its Alloys • Refractory Alloys • Repair Welding
Book

The Practical Reference Guide for Welding Titanium

1999-01-01
Titanium need not be all that hard to weld! In industrial sectors the common opinion is that titanium alloys are difficult to weld. While it is true that titanium alloys can be embrittled by carless welding techniques, it is equally true that these materials are much more weldable than their reputation suggests. This reference guide discusses the difficulties that originate from several basic sources when welding titanium and titanium alloys. The high reactivity of titanium with other materials, poor cleaning of parts before joining, and inadequate protection during welding can lead to contamination, porosity and embrittlement of the completed joints. Topics Covered: • Weld Cleaning • Gas Shield Arc Welding Processes • Gas Tungsten Arc Welding • Gas Metal Arc Welding • Plasma Arc Welding • Other Welding Processes
Book

Metallic Materials Properties Development and Standardization (MMPDS) Handbook - 09

2014-04-01
The Metallic Materials Properties Development and Standardization (MMPDS) Handbook, is an accepted source for metallic material and fastener system allowables recognized by the Federal Aviation Administration (FAA), all departments and agencies of the Department of Defense (DoD), and the National Aeronautics and Space Administration (NASA), within the limitations of the certification requirements of the specific government agency. MMPDS-09 supersedes MMPDS-08and prior editions of the MMPDS as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March of 2006.
Book

Technology for Magnesium Castings

2011-01-01
The latest casting and processing technologies have raised the importance of magnesium in the transportation industry. As a structural material with low density and a very high strength-to-weight ratio, magnesium can reduce vehicle weight and, in turn, reduce greenhouse gas emissions and increase fuel economy. This book provides valuable information on: • melt control • process control • casting and solidification • heat treatment • materials selection • various casting processes The 18 chapter authors are world-class scientists, professors and engineers with countless years of industrial and laboratory experience. Each chapter was also reviewed by qualified metallurgists/materials engineers from the metalcasting industry, academia and research laboratories to ensure that only the highest quality information was accepted for publication.
Book

Experimental and Simulation Tools for Thin-Film Solar Cells

2016-01-01
Experimental and Simulation Tools for Thin-Film Solar Cells describes the methods used for the optical characterization and design of thin-film solar cells. A description of the cells under study (CdTe, CIGS, CZTS, Perovskite, and organic) is given, followed by coupling experimental and simulation studies in order to improve solar cell performances. A detailed discussion on specific optical tools (ellipsometry, photoluminescence and photoreflectance) is included, and a link between materials and measurements is made by studying the relevant physical principles. Finally, a numerical model is provided that can be used to design the structure of a thin-film solar cell.
Book

Nanotechnology: A Crash Course

2010-01-01
The past few decades have seen an explosive increase in our ability to create nanostructures and nanosystems with a great degree of control, using a diversity of techniques. This ability has been accompanied by a similar enhancement in our ability to characterize structures and systems at the nanoscale. Nanotechnology: A Crash Course provides a broad overview of those nanostructures and nanosystems (together termed "Nanotechnology"). It covers structural characteristics and properties of nanostructures, nanofabrication techniques, methods for characterizing nanostructures, and applications for nanomaterials. The book also provides a thought-provoking assessment of the possible implications of nanotechnology in society, and likely future trends.
Book

Fracture Resistance of Aluminum Alloys: Notch Toughness, Tear Resistance, and Fracture Toughness

2001-09-01
Fracture Resistance of Aluminum Alloys presents one of the most complete compendiums of notch-tensile, tear, and fracture toughness data ever compiled. Information and data are included for a wide range of aluminum alloys, tempers, and products (sheet, plate, extrusions, forgings, and castings). Typical and minimum plane-stress and plane-strain fracture toughness values are given for many high strength alloys. The effects of temperature are covered extensively, especially for the notch-tensile and tear data. Fracture data for welds as well as the parent alloys and products also are included.
Book

Corrosion of Weldments

2006-12-01
Corrosion failures of industrial components are commonly associated with welding. The reasons are many and varied. For example, welding may reduce the resistance to corrosion and environmentally assisted cracking by altering composition and microstructure, modifying mechanical properties, introducing residual stress, and creating physical defects. Corrosion of Weldments details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups—carbon and alloy steels, stainless steels, high-nickel alloys, and nonferrous alloys—describe both general welding characteristics and the metallurgical factors that influence corrosion behavior. Corrosion problems associated with dissimilar metal weldments are also examined. Special challenges caused by high-temperature environments are discussed.
Book

Aluminum-Silicon Casting Alloys: Atlas of Microfractographs

2004-05-01
This electronic atlas provides an in-depth understanding of the metallurgy and fracture behavior of aluminum-silicon casting alloys, which are used in a wide variety of automotive, aerospace, and consumer product applications. The atlas includes over 300 high-definition microfractographs of fracture profiles and fracture surfaces, accompanied with detailed descriptions and analysis of the fracture features and their significance in the selection, processing, properties, and performance of the alloy. The microfractographs are described and classified according to criteria described in detail in the introductory chapters in the book. The factors determining the fracture mechanism in these alloys, on the basis of their physical and mechanical properties and fracture mechanics, are described and analyzed.
Book

Guide to Friction, Wear, and Erosion Testing

2007-01-01
No other book provides the details of how to conduct tribotests, including their implications, how to avoid pitfalls, and which are most useful. This manual describes the many manifestations of friction wear and erosion and suggests specific tests that can be used to address problems. It gives guidance in determining if bench tests are appropriate for a problem and if so, which ones should be considered. Manual 56 is an excellent resource for newcomers to tribology and a useful reference for practicing tribologists.
Book

Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

2007-06-01
Progress in the understanding of corrosion and corrosion resistance properties of sintered stainless steels has lead to new applications that benefit from net shape processing and more efficient material utilization. Powder Metallurgy Stainless Steels includes extensive graphics, and tabular summaries provide a comprehensive reference to obtain good corrosion resistance properties of sintered stainless steels with careful processing, starting with powder selection, avoidance of contamination, efficient delubrication, and controlled sintering and cooling. Contents cover: Metallurgy and Alloy Compositions, Manufacture and Characteristics of Stainless Steel Powders, Compacting and Shaping, Sintering and Corrosion Resistance Alloying Elements, Optimal Sintering, and Surface Modification in PM Stainless Steels Mechanical Properties, Magnetic and Physical Properties, Corrosion Testing and Performance, Secondary Operations, and Applications.
Book

Introduction to Aluminum Alloys and Tempers

2000-11-01
Since aluminum alloys offer an excellent combination of light weight, high-strength, great corrosion resistance and reasonable cost, they have become one of the most commonly used metal groups today. This electronic publication addresses the need for basic information on aluminum alloys and their tempers. The author provides the reader with an understanding of the advantages and limitations of aluminum alloys and temper combinations in terms of the relationship of their composition, process history, and microstructure to service requirements. The temper designation of an aluminum alloy provides the user with background information as to how the alloy has been produced in order to obtain specific and desired properties and characteristics.
Book

Titanium: A Technical Guide, 2nd Ed.

2000-12-01
Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, Titanium: A Technical Guide provides a concise summary of the most useful information required to understanding titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users.
Book

Surface Wear: Analysis, Treatment, and Prevention

2001-06-01
Surface Wear Analysis, Treatment, and Prevention provides a multidisciplinary approach to understanding wear, diagnosing its causes, and prescribing appropriate treatments and preventive measures. The surface engineering techniques and practical guidance provided can be applied to the design, manufacture, and maintenance of machinery to provide cost-effective improvements in the performance of engineered components. Information also describes using appropriate systems and materials for maintaining and reconditioning equipment to extend service life.
Magazine

Automotive Engineering International 2004-08-01

2004-08-01
Success by design Toyota is working to differentiate itself from the competition by continually evolving its unique design philosophy. China overcapacity overstated? Automakers and suppliers are taking a "build it and they will come" approach to capacity in China. Challenges aplenty in China From an underdeveloped infrastructure to insufficient policing of intellectual property rights, government and industry leaders in China are dealing with a multitude of challenges--and opportunities--as vehicle sales soar. Testing adapts Growing vehicle complexity, globalization, and other industry trends are prompting companies to focus more on automation and standardization in their test programs. Lightweight vehicle engineering Demand for performance and fuel economy make materials once considered too expensive increasingly attractive.
X