Search Results

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

MINIMUM PERFORMANCE CRITERIA FOR BRAKING SYSTEMS FOR SELF-PROPELLED, SMOOTH STEEL WHEEL, PNEUMATIC TIRED OR MULTIPLE PROJECTION STEEL WHEEL ROLLERS AND COMPACTORS

1976-04-01

HISTORICAL

J1136_197604

Minimum performance criteria for service braking systems, emergency stopping systems, and parking systems for all self-propelled vibratory and static weight smooth steel wheel, pneumatic tired or multiple projection steel wheel rollers and compactors are provided in this S.A.E. recommended practice.

Standard

Recreation Off-Road Vehicle Product Identification Numbering System

2012-05-07

CURRENT

ICS1000_201205

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT

1991-06-01

HISTORICAL

J450_199106

The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.

Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT

1984-06-01

HISTORICAL

J450_198406

Standard

TON-MILE PER HOUR TEST PROCEDURE

1974-03-01

HISTORICAL

J1015_197403

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

TON-MILE PER HOUR TEST PROCEDURE

1977-06-01

HISTORICAL

J1015_197706

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

TON-MILE PER HOUR TEST PROCEDURE

1983-12-01

HISTORICAL

J1015_198312

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

NOMENCLATURE—ROLLERS AND COMPACTORS

1986-01-01

HISTORICAL

J1017_198601

This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2008-04-11

HISTORICAL

J1051_200804

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2002-12-18

HISTORICAL

J1051_200212

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2020-03-30

CURRENT

J1051_202003

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2013-08-05

HISTORICAL

J1051_201308

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES

1988-12-01

HISTORICAL

J1051_198812

Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES

1984-06-01

HISTORICAL

J624_198406

This recommended practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.

Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES

1989-09-01

HISTORICAL

J624_198909

This SAE Recommended Practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.

Standard

INTERNAL COMBUSTION ENGINES—PISTON RINGS—MATERIAL SPECIFICATIONS

1992-10-01

HISTORICAL

J1590_199210

Differences, where they exist, are shown in Appendix A. This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.

Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2008-04-14

HISTORICAL

J1119_200804

The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.

Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2002-09-20

HISTORICAL

J1119_200209

The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.