Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

SAE J1939 Network Security

2017-03-06
WIP
J1939-91
This document will provide recommendations to vehicle manufacturers and component suppliers in securing the SAE J1939-13 connector interface from the cybersecurity risks posed by the existence of this connector.
Collection

Vehicle Aerodynamics, 2018

2018-04-03
Vehicle aerodynamic development, drag reduction and fuel economy, handling and stability, cooling flows, surface soiling and water management, vehicle internal environment, tyre aerodynamics and modelling, aeroacoustics, structural response to aerodynamic loading, simulating the on-road environment, onset flow turbulence, unsteady aerodynamics, fundamental flow structures, new test methods and facilities, new applications of computational fluid dynamics simulation, competition vehicle aerodynamics.
Standard

Brake Drum Static Equivalency

2019-01-25
WIP
J3192
This Recommended Practice is intended for testing the static performance of a friction material and drum combination on an inertia dynamometer.
Magazine

SAE Truck & Off-Highway Engineering: December 2018

2018-12-01
Electrification takes (some of) the load There’s no better way to relieve worry over meeting emissions regulations than by not producing any emissions from the start. But electric drive is not a silver bullet. Weight watcher Meritor optimizes product design and examines “exotic” materials like carbon fiber to slash mass from drivelines. Electrifying demo Diesel pioneer Deutz equipped telehandlers with hybrid and fully electric powertrains and put their capabilities on display. Automated and electric at IAA Far-out concepts and nearer-to-production prototypes dotted the show floor and outdoor demo track at the biennial commercial-vehicle event in Hanover, Germany. Delphi injects life into diesel Fuel-injection advances enable cleaner, quieter operation, while gains in power electronics and controls help grow electrification business.
Standard

Guidelines for Aerodynamic Assessment of Mass-Produced Cars and Light-Duty Trucks Using Computational Fluid Dynamics

2019-07-01
WIP
J3191
This document outlines general requirements for the use of Computational Fluid Dynamics (CFD) methods for aerodynamic simulation of mass-produced cars and light-duty trucks. The document provides guidance for aerodynamic simulation with CFD methods to support current vehicle characterization, vehicle development, vehicle concept development and vehicle component development. The guidelines presented in the document include Navier-Stokes and Lattice-Boltzmann based solvers.
Video

SAE Demo Day in Tampa - City and State Perspectives

2018-08-14
Dramatic changes in transportation are coming. Cities and states looking to be at the forefront and reap the benefits, need an engaged and informed citizenry. Hear how the SAE Demo Day in Tampa supported Florida's AV initiatives and can benefit states nationwide.
Video

SAE Demo Day in Tampa - Highlights

2018-08-14
In May 2018, SAE International in partnership with THEA and leading AV technology companies gave citizens in Tampa a chance to test ride the future. The event included a pre- and post-ride survey, a ride in an automated vehicle, interactive displays and engagement with industry experts. See highlights of the event and feedback from participants.
Video

SAE Moves You

2018-07-30
Meet the engineers shaping the world of mobility and driving the future of engineering.
Technical Paper

Performance and Emissions of an LPG Lean-Burn Engine for Heavy Duty Vehicles

1999-05-03
1999-01-1513
Performance and emissions of an LPG lean burn engine for heavy duty vehicles were measured. The piston cavity, swirl ratio, propane - butane fuel ratio, and EGR were varied to investigate their effects on combustion, and thus engine performance. Three piston cavities were tested: a circular flat-bottomed cavity with sloped walls (called the “bathtub” cavity), a round bottomed cavity (called the “dog dish” cavity), and a special high-turbulence cavity (called the “nebula” cavity). Compared to the bathtub and dog dish cavities, the nebula type cavity showed the best performance in terms of cyclic variation and combustion duration. It was capable of maintaining leaner combustion, thus resulting in the lowest NOx emissions. High swirl improved combustion by achieving a high thermal efficiency and low NOx emissions. In general, as the propane composition increased, cyclic variation fell, NOx emissions increased, and thermal efficiency was improved.
Technical Paper

Emissions from Buses with DDC 6V92 Engines Using Synthetic Diesel Fuel

1999-05-03
1999-01-1512
Synthetic diesel fuel can be made from a variety of feedstocks, including coal, natural gas and biomass. Synthetic diesel fuels can have very low sulfur and aromatic content, and excellent autoignition characteristics. Moreover, synthetic diesel fuels may also be economically competitive with California diesel fuel if produced in large volumes. Previous engine laboratory and field tests using a heavy-duty chassis dynamometer indicate that synthetic diesel fuel made using the Fischer-Tropsch (F-T) catalytic conversion process is a promising alternative fuel because it can be used in unmodified diesel engines, and can reduce exhaust emissions substantially. The objective of this study was a preliminary assessment of the emissions from older model transit operated on Mossgas synthetic diesel fuel. The study compared emissions from transit buses operating on Federal no. 2 Diesel fuel, Mossgas synthetic diesel (MGSD), and a 50/50 blend of the two fuels.
Technical Paper

Transmission Oil Degradation Warning Systems and Computing in Agricultural Tractors

2000-06-19
2000-01-1873
This communication examines three strategies of predictive lubricant monitoring and replacement, used for farm tractors or similar vehicles. These strategies optimise the draining periodicity. They are the off-line follow-up, the sensors follow-up and the analytical model follow-up. The implementation of the suggested analytical model will be discussed, on the basis of field collected data (on a series of tractors, either customer's or on loan). Regular oil samples, and significant ones carried out at the end of the study, were taken and analysed in order to predict the evolution of the lubricant characteristics. Extensions to the experimental study were carried out at the end of this work. They are discussed in the paper (FZG gear scuffing, 4 ball wear and EP…).
Technical Paper

Influence of Fuel Aromatics Type on the Particulate Matter and NOx Emissions of a Heavy-Duty Diesel Engine

2000-06-19
2000-01-1856
The influence of fuel aromatics type on the particulate matter (PM) and NOx exhaust emissions of a heavy-duty, single-cylinder, DI diesel engine was investigated. Eight fuels were blended from conventional and oil sands crude oil sources to form five fuel pairs with similar densities but with different poly-aromatic (1.6 to 14.6%) or total aromatic (14.3 to 39.0%) levels. The engine was tuned to meet the U.S. EPA 1994 emission standards. An eight-mode, steady-state simulation of the U.S. EPA heavy-duty transient test procedure was followed. The experimental results show that there were no statistically significant differences in the PM and NOx emissions of the five fuel pairs after removing the fuel sulphur content effect on PM emissions. However, there was a definite trend towards higher NOx emissions as the fuel density, poly-aromatic and total aromatic levels of the test fuels increased.
Technical Paper

AQUAZOLE™: An Original Emulsified Water-Diesel Fuel for Heavy-Duty Applications

2000-06-19
2000-01-1861
1 Since 1997 the ELF group has been working on a new fuel designed in priority for use with urban services (buses, lorries). Basically, it is a diesel/water emulsion stabilised by a series of new additives. A lot of testing programmes on engine and vehicles test benches was carried out. They have clearly shown that with this new fuel there is a reduction of nitrogen oxide emissions by up to 30% and black smoke by up to 80%, without any technological modifications being necessary as against EN 590 diesel fuel marketed normally. The water content is, however, the cause of a certain loss in engine performances. Nevertheless, hydrocarbon consumption is reduced by up to 4%. The use of an oxidation catalyst is compatible with a water-diesel emulsified fuel and results in larger emission benefits. Furthermore, a 50 ppm sulphur emulsion with a continuously regenerating particle filter give a particle reduction of 90%.
Technical Paper

Heavy Duty Testing Cycles Development: A New Methodology

2000-06-19
2000-01-1860
Testing cycles for heavy-duty vehicles are an important topic for authorities, manufacturers, fleet owners, etc. in order to assess exhaust gas emissions and fuel consumption. A new methodology was developed to derive representative testing cycles from velocity versus time driving information. During the development, the work was focussed on city-buses, but the methodology can be applied to heavy-duty vehicles in general. The testing cycles are ‘distance-based’, meaning they impose goal speeds at each location. This implies that during acceleration phases, the accelerator-pedal - and gear lever in case of manual transmission - can be operated in a realistic way. The techniques for deriving this kind of testing cycle are proposed. Results of on-board emission and fuel consumption measurements employing these testing cycles are presented for two 19 tons, 160kW city buses, equipped with respectively a diesel and a CNG (stoechiometric) engine, and a 10 tons 112 kW diesel delivery truck.
Technical Paper

Investigation of a Roll Control System for an Off-road Vehicle

2000-05-01
2000-01-1646
The current popularity of the Sport Utility Vehicle (SUV) market has led to new developments aiming to increase product performance. Such vehicles pose a significant challenge as they must perform to a high standard over a large variety of road conditions. Previously, emphasis has been placed on off-road ability. However, SUVs are now seen as an alternative to conventional luxury cars, and hence are expected to perform similarly, but without significantly degrading off-road performance. The introduction of a roll control system can achieve body roll levels lower than a conventional sports saloon, whilst improving off-road ability by removing the compromises associated with conventional anti-roll bars. This paper investigates the characteristics of such a system by developing a computer simulation of the vehicle and the associated roll control scheme.
Technical Paper

New Quiescent Combustion System for Heavy–Duty Diesel Engines to Overcome Exhaust Emissions and Fuel Consumption Trade–Off

2000-06-19
2000-01-1811
In the next few years, the USA, EU, and Japan plan to introduce very stringent exhaust emissions regulations for heavy–duty diesel engines, in order to enhance the protection air quality. This builds upon the heavy–duty diesel engine exhaust emissions regulations already in effect. At the same time, improvement in fuel consumption of heavy–duty diesel engines will be very important for lowering vehicle operating costs, conserving fossil fuel resources, and reduction of CO2 (greenhouse gas) levels. This paper presents a detailed review of a quiescent combustion system for a heavy–duty diesel engine, which offers breakthrough performance in terms of the exhaust emissions – fuel consumption trade–off, compared with the more conventional swirl supported combustion system. This conclusion is supported by experimental results comparing quiescent and swirl supported versions of various combustion system configurations.
X