Search Results

With the growing environmental concerns, biodegradable materials are gaining more importance. Biocomposites which are made from a combination of biological fiber such as flax and hemp together with plastics are finding a good number of applications in day to day life. Flax has good physical and mechanical properties that can be utilized in areas like construction, biomedical & bioproducts and electronics applications. The quality of fiber depends upon various unit operations used in the processing. Drying is one of the most important unit operations which significantly affect the quality of the fiber. The method of drying for removal of moisture from the fiber significantly affects the drying time and quality. In the present study the raw flax fiber was subjected to drying before and after chemical treatment. The physical properties such as; tensile strength, color and structural changes were measured for raw and chemically treated flax fibers.

Facing a competitive and globalized market and with increasingly demanding customers, companies must constantly seek the development of practices in the development of new products. One of the current practices is the adoption of modularity. In that sense, the objective of this paper is to conduct an analysis of this practice in a Brazilian company, which manufactures agricultural machinery. The applicability of modular design in current products is focused. Therefore, a case study approach has been chosen. First, a review of the scientific literature was conducted, followed by field research, for collecting data based on interviews with product engineers and technical documentation. The case study shows the applicability of the modular design concept in a combine header, by increasing the number of repeated components. The modular header approach facilitates the implementation of engineering changes and allows greater standardization of components.

Coatings have the potential to improve bearing tribological performance. However, every coating application process and material combination may create different residual stresses and coating microstructures, and their effect on bearing fatigue and wear performance is unclear. The aim of this work is to investigate coating induced residual stress effects on bearing failure indicators using a microstructural contact mechanics (MSCM) finite element (FE) model. The MSCM FE model consists of a two-dimensional FE model of a coated bearing surface under sliding contact where individual grains are represented by FE domains. Interactions between FE domains are represented using contact element pairs. Unique to this layered rolling contact FE model is the use of polycrystalline material models to represent realistic bearing and coating microstructural behavior. The MSCM FE model was compared to a second non-microstructural contact mechanics (non-MSCM) model.

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.

This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.

For some years, OEMs and suppliers have been using CAD tools to improve efficiencies in both mechanical design and electrical design. Modern CAD tools have evolved from simple drafting and documentation towards specialized tools for each task – mechanical layout, mechanical styling, electrical design, manufacturing design, and so on. There is often a significant overlap between the data-scope of each of these tools, but, without good integration facilities, engineers must re-key the same information in each of the different tools: this is both time-consuming and error-prone. This paper examines, and illustrates, the issues, technologies and processes that are available to improve the integration between mechanical and electrical CAD tools, and between OEMs and their suppliers.

Effective requirements elicitation and management is a common need in supplier-OEM relationships, and continues to play a vital role in all aspects of the product development lifecycle. While traditional methods address the business goals for requirements and provide guidance in ensuring the accuracy of the “Descriptive-Prescriptive-Explanatory” outputs for requirements gathering and documentation, engineering organizations continue to encounter challenges with respect to capturing and communicating change, accommodating the addition of relevant design details and efficient propagation to inform development. These challenges become more difficult to overcome in mechatronic systems, which combine mechanical systems with integrated software. As software development can produce an overwhelming volume of information that requires accurate tracking and proliferation, it cannot be effectively managed using traditional hardware-centric systems.

Compacted Graphite Iron (CGI) has been recognized for years as a unique material possessing a fortunate combination of properties intermediate between gray iron and ductile iron. This material, for reasons outlined in this paper, is ideal for cylinder blocks, heads and other cast iron components for diesel engines. It makes possible casting weight savings of up to 1/3 and/or increased power output. This paper will outline reasons why this is now possible, whereas it has seldom been applied in volume production heretofore. Physical and mechanical properties of CGI, which provide the opportunity for weight reduction and increased power, are discussed. Currently, most diesel engine cylinder blocks, heads, liners and many other castings are produced from gray iron, which requires relatively heavy sections to provide the strength, stiffness and durability necessary for commercial application.

Data link interfaces have become a requirement for the heavy duty vehicle industry because of the need to share information between individual subsystems. Therefore, it is important for the industry to be familiar with the existing heavy duty vehicle serial data communications standards. SAE has addressed the need to share information between individual subsystems and this paper presents the serial data communications adopted in SAE Recommended Practices J1708, J1587 and J1922 as well as J1939 which is currently under development by the Truck and Bus Control and Communications Network Subcommittee. For a vehicle of the early to mid-1990s, the J1708, J1587 and J1922 documents provide the standards to accommodate general information sharing, detailed diagnostic definition and early powertrain controls integration. The J1939 document being developed will define a network that encompasses all the requirements satisfied by J1708, J1587 and J1922 and any new requirements that arise.

A small sample lot of Conrad type ball bearings fabricated of silicon nitride have been fatigue tested under full film liquid lubrication conditions. Analysis of the failed bearings points to a failure mechanism which is different than that of steel bearing fatigue. A failure model has been developed based on the static strength of the material, manufacturing process effects and basic contact mechanics. The failure mode found identifies one limitation of the use of ceramic bearings. The limitation is dictated by the tensile stresses produced in operation and the strength of the finished component. It was demonstrated that silicon nitride fails by mechanical fatigue when subject to high Hertzian contact stress. It must be clearly understood, however, that the high Hertzian contact stresses (above 350 k.s.i.) used in this test program are greater than those of recommended design practice. The bearing manufacturing, testing and failure analysis are discussed.

The accompanying mounting and gear locations are applicable for all general installations of power take-off on the transmission gear box of motor trucks and tractors where the size of the transmission permits. The heavy-duty type opening can be adapted to the regular-duty type by the use of an adapter with 6.35 mm (0.25 in) flange thickness with appropriate bolt pattern and thread engagement. (See Figures 1 and 2.)

The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.

Abstract The present work deals with the damage life correlation of vehicle-level testing results of an axle housing for different road load conditions with the accelerated bench testing experiment results to reduce product development time. Also failure analysis is carried out to overcome the mechanical strength losses caused by the hot forming process during the manufacturing of housings. Commercial vehicle torture test tracks are built to reflect the forces similar to vehicle usage conditions from lighter to severe loadings. Strain data and calibrated force values are captured at the critical loading points in the axle for one cycle, at actual vehicle-driven speeds, to reflect the accelerated load values on five different track conditions. Damages estimation carried out based on the road loads reflects there will be no failure of axle housings till the acceptance of 120 repeats in different track combinations.

Requirements engineering is an important part of the software development process. There are various challenges associated with the elicitation, analysis, documentation, and validation of requirements, and these challenges can be more pronounced in embedded software systems, where a number of characteristics, unique to these systems, must be addressed. This paper will examine the unique concerns surrounding the requirements engineering of embedded software systems, including the need to elicit, specify, and validate, interrupts and exceptions, concurrency, and timing. We will then survey and examine some of the current requirements engineering research that can address these concerns. Finally, we will consider whether some of the requirements engineering concerns and practices conceived for, and utilized in the Information Technology (IT) domain, can be beneficial to the development of embedded systems.

This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)

This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)