Refine Your Search

Search Results

Viewing 1 to 10 of 10
Training / Education

Advanced Concepts of GD&T 1994 3-day

This course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard and can be conducted with flexible scheduling including 5 mornings or 5 afternoons. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 250 practice problems.
Training / Education

Critical Concepts of Tolerance Stacks 2009 3-day

2021-07-13
This course, based on the ASME Y14.5-2009 standard, provides an in-depth explanation of how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks. You will learn the essential methods and concepts used for creating 1D part and assembly tolerance stacks.
Training / Education

Fundamentals of Fatigue Analysis

Fatigue is a structural failure mode that must be recognized and understood to develop products that meet life cycle durability requirements. In the age of lightweighting, fatigue strength is an important vehicle design requirement as engineers struggle to meet stringent weight constraints without adversely impacting durability. This technical concept course introduces the fatigue failure mode and analysis methods. It explains the physics of material fatigue, including damage accumulation that may progress to product failure over time, and it provides the needed foundation to develop effective fatigue prediction capabilities.
Training / Education

Fundamentals of GD&T 2018 3-day

2021-08-17
This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2018 Standard and can be conducted with flexible scheduling including 5 mornings or 5 afternoons. This course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and verification principles. The class includes a comparison of GD&T to the directly toleranced dimensioning method; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education

Advanced Concepts of GD&T (2009) 2-day

2021-04-20
This course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard and offers an in-depth explanation of advanced GD&T topics not covered in our Fundamentals training. Complex topics include expanded use of composite position and profile tolerances, customized datum reference frames, the translation modifier, and applying GD&T to non-rigid parts. Learning is enforced interactive engagement between the instructor and the students, followed with numerous exercises at the end of each chapter.
Training / Education

Applications of GD&T 2-Day

2021-10-12
This course teaches the thought processes involved in assigning GD&T to components and will change the way many engineers think about part tolerancing. The course focuses on what constitutes good and poor drawing practices, common dimensioning methods used in industry, using GD&T to communicate system functions on component dimensions, and the logic of how to apply GD&T to components. Newly acquired learning is reinforced when students perform a design function analysis on a part assembly provided by your company, then specify GD&T on assembly components during the workshop. (This is optional in case of concerns over drawings and privacy.)
Training / Education

Fundamentals of GD&T for Inspectors 2-day

This course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems). Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education

Fundamentals of GD&T 1994 3-Day

This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 300 practice problems.
Training / Education

Model-Based Systems Engineering (MBSE)

2021-06-08
As the complexity of products increases, traditional text-based systems engineering can no longer meet the needs. To solve the problem, Model-based Systems Engineering offers a unified communication platform among relevant staff by carrying out diagram-based unambiguous description, analysis and design for the demand, structure and behavior of complex systems in the form of a model. It, however, still remains a challenge to implement MBSE modeling and model-driven technology and application as well as its integration with the industry.
Training / Education

Fundamentals of GD&T 2009 3-day

2021-05-04
This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard and can be conducted with flexible scheduling including 5 mornings or 5 afternoons. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
X