Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Impact testing of automotive fuel tanks

2008-06-26
WIP
J2852
Drop testing and "sled" testing are used regularly to demonstrate integrity of plastic fuel systems. This document defines test method, application and rationale for fuel tank impact testing.
Standard

Combination Tail and Floodlamp for Industrial Equipment

2003-05-15
CURRENT
J94_200305
This SAE Standard provides performance and general design requirements and related test procedures for a combination tail and floodlamp for use on industrial wheeled equipment that may be operated on public roads.
Collection

Electric Motor and Power Electronics, 2011

2011-04-12
The 11 papers in this technical paper collection cover development of integrated modular motor drive; a current source inverter based motor drive for EV/HEV applications; high power density motor and inverter for RWD hybrid vehicles; wireless power transfer for electric vehicles; and more.
Collection

High Efficiency IC Engines, 2012

2012-04-13
The 14 papers in this technical paper collection discuss high efficiency IC engines. Topics covered include engine downsizing, pressure boosting and turbocharging, intelligent combustion, low temperature and stratified charge, advanced fuel injection technologies, and more. The 15 papers in this technical paper collection discuss high efficiency IC engines. Topics covered include engine downsizing, pressure boosting and turbocharging, intelligent combustion, low temperature and stratified charge, advanced fuel injection technologies, and more.
Collection

Electric Motor & Power Electronics, 2018

2018-04-03
Power electronics and electric motors are essential for improving vehicle efficiency through drivetrain electrification. Technologies that support high efficiency, high power density, and low cost motors and power modules are required for the success of vehicle electrification.
Collection

Control System Design & Calibration, 2018

2018-04-03
Separate sub-sessions cover powertrain control, calibration, and system-level optimization processes related to achieving stringent market fuel economy, emissions, performance, reliability, and quality demands. Topics include the control, calibration, and diagnostics of the engine, powertrain, and subsystems related to energy management in conventional and hybrid operation, considering the simultaneous optimization of hardware design parameters and control software calibration parameters.
Collection

Electric Motor & Power Electronics, 2017

2017-03-28
Power electronics and electric motors are essential for improving vehicle efficiency through drivetrain electrification. Technologies that support high efficiency, high power density, and low cost motors and power modules are required for the success of vehicle electrification.
Collection

Fuel Injection and Sprays, 2018

2018-04-03
This collection is devoted to experimental and computational work in the area of fuel injection systems and sprays. Topics include: spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects.
Collection

Controls for Hybrids and Electric Powertrains, 2018

2018-04-03
The papers in this collection cover powertrain control processes related to achieving stringent market fuel economy, emissions, performance, reliability, and quality demands of hybrid and electric powertrains. Topics include the control, calibration, and diagnostics of the engine, powertrain, and supporting electromechanical subsystems related to energy management.
Collection

Control System Design & Calibration, 2017

2017-03-28
Separate sub-sessions cover powertrain control, calibration, and system-level optimization processes related to achieving stringent market fuel economy, emissions, performance, reliability, and quality demands. Topics include the control, calibration, and diagnostics of the engine, powertrain, and subsystems related to energy management in conventional and hybrid operation, considering the simultaneous optimization of hardware design parameters and control software calibration parameters.
Collection

Fuel Injection and Sprays, 2017

2017-03-28
This collection is devoted to experimental and computational work in the area of fuel injection systems and sprays. Topics include: spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects.
Collection

Controls for Hybrids and Electric Powertrains, 2017

2017-03-28
The papers in this collection cover powertrain control processes related to achieving stringent market fuel economy, emissions, performance, reliability, and quality demands of hybrid and electric powertrains. Topics include the control, calibration, and diagnostics of the engine, powertrain, and supporting electromechanical subsystems related to energy management.
Standard

Plastic Filler Pipes

2018-11-20
WIP
J3180
This specification will include plastic tubing testing similar to J2260 but with updated values and testing procedures to handle the difference in material performance of large refueling tubes like a plastic filler pipes.
Collection

Safety-Critical Systems, 2018

2018-04-03
The papers in this collection focus on system safety analysis and design of safety-critical systems employing electronic controls. Topics include: implementation of safety-relevant systems, fail-safe strategies, distributed fault tolerant systems and hazard analysis. Application areas include: automotive active safety and alternative energy systems as well as avionics and mission management.
Video

Driving with Grid Energy - The Chevrolet Volt Extended Range EV

2011-11-04
With the introduction of the Chevrolet Volt, the Electrification of the Automobile begins in earnest, by offering a car that runs off of grid energy that has mass market appeal. The Volt offers a vehicle which is driven primarily by electricity under ?real world? driving conditions, while not presenting the driver with inconvenient choices about range and recharge time, or the disconcerting experience of a real possibility of becoming stranded. The Voltec powertrain arrangement enables the Volt to be an Extended Range Electric Vehicle, or E-REV and gives full performance utilizing only electrical energy from the grid for most driving, and a seamless transition to gasoline energy for longer and less frequent trips to maintain full vehicle utility. General Motors and its suppliers has had to the lead developments of fundamental component technologies that were not addressed by earlier, more simple hybridization work.
Video

Flexible Real-Time Simulation of Truck and Trailer Configurations

2011-12-05
Real-time simulation of truck and trailer combinations can be applied to hardware-in-the-loop (HIL) systems for developing and testing electronic control units (ECUs). The large number of configuration variations in vehicle and axle types requires the simulation model to be adjustable in a wide range. This paper presents a modular multibody approach for the vehicle dynamics simulation of single track configurations and truck-and-trailer combinations. The equations of motion are expressed by a new formula which is a combination of Jourdain's principle and the articulated body algorithm. With the proposed algorithm, a robust model is achieved that is numerically stable even at handling limits. Moreover, the presented approach is suitable for modular modeling and has been successfully implemented as a basis for various system definitions. As a result, only one simulation model is needed for a large variety of track and trailer types.
Video

Best Practices for In-Vehicle Network Development

2011-12-05
The number of electronically controlled systems in commercial vehicles is increasing rapidly. Much of this electrical content is controlled using ECUs (Electronic Control Units) which share information using some type of networking technology, such as a CAN bus running the SAE J1939 protocol. Presenter Jeffrey Craig, Vector CANtech Inc.
Video

Maturity Level and Variant Validation of Mechatronic Systems in Commercial Vehicles

2011-12-05
Driver assistance systems (e.g. the emergency brake assist Active Brake Assist2, or ABA2 for short, in the Mercedes-Benz Actros) are becoming increasingly common in heavy-duty commercial vehicles. Due to the close interconnection with drivetrain and suspension control systems, the integration and validation of the functions make the most exacting demands on processes and tools involved in mechatronics development. Presenter Thomas Bardelang, Daimler AG
Video

High Temperature Power Device and Packaging - The Technology Leap to Achieve Cost, Power Density and Reliability Target

2011-11-07
The three major challenges in the power electronics in hybrid and electric vehicles are: System cost, power density and reliability. High temperature power device and packaging technologies increases the power density and reliability while reducing system cost. Advanced Silicon devices with synthesized high-temperature packaging technologies can achieve junction temperature as high as 200C (compared to the present limitation of 150C) eliminating the need for a low-temperature radiator and therefore these devices reduces the system cost. The silicon area needed for a power inverter with high junction temperature capability can be reduced by more than 50 - 75% thereby significantly reducing the packaging space and power device and package cost. Smaller packaging space is highly desired since multiple vehicle platforms can share the same design and therefore reducing the cost further due to economies of scale.
X