Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Performance based packaging standard for lithium batteries as cargo on aircraft

2016-03-18
WIP
AS6413
This standard is intended to demonstrate and document the control of the potential hazards from lithium cells or batteries (UN 3090 and 3480) when transported as cargo on aircraft. [still need to identify if we are addressing global (external fire) or local (battery internal failures)] This standard addresses the need to control the hazards which might arise from a failure from an individual cell by containing the hazards within the package. This specific hazards addressed within this standard are: • Uncontrolled fire • Rapid overpressure pulse within compartment
Standard

High Performance Laser Sintering Process for Thermoplastic Parts for Aerospace Applications

2019-01-15
WIP
AMS7102
This specification will establish the critical controls and requirements for the production of reliable, repeatable, reproducible aerospace parts by Laser Sintering fabrication but is not limited to such application. This procedure will establish guidelines that users shall follow to approve new machines, processes, and materials. Specifically, this specification covers the configuration of the machine, operating software, machine calibration, machine and build parameters, and testing methodology required to create high performance aerospace parts. This specification also outlines the user’s responsibility for following the established guidelines and documentation requirements
Standard

Material for High Performance Laser Sintering

2019-01-15
WIP
AMS7103
This specification will establish the minimum requirements for Laser Sintering feedstock to be used in conjunction with the Laser Sintering process specification for fabricating LS parts. The Laser Sintering part (with/without subsequent processing) may be used for, but not limited to, aerospace applications. This specification outlines the minimum technical and documentation requirements for Laser Sintering materials.
Standard

Inconel 718 L-PBF Material specification

2019-06-19
WIP
AMS7024
Inconel 718 L-PBF Material specification - Use SDM 718 tensile data (SR+HIP+SA per API 6A718) - T99 (sample size 90 room temperature cylindrical ASTM E8 tensile results from a total of 9 builds evenly divided between EOS machines M400, M280 and M290) - Data analysis performed by Battelle - UTS 198 ksi / YS 157 ksi / E- 19%
Standard

Compatibility of Turbine Lubricating Oils

2019-07-16
WIP
ARP7120
This method is used for determining the compatibility of a candidate lubricant with specific reference lubricants. The reference lubricants will typically be mandated by the product specification against which the candidate lubricant is being compared. This method is based on Federal Standard 791 method 3403 and Defence Standard 05-50 (Part 61) method 24, incorporating the modifications called for in SAE AS5780.
Video

Career Counselor Series: Effective Communication

2017-09-19
Alyson Lyon, executive leadership coach, discusses the value of effective and efficient communication. SAE Members can view the full version by logging into the Member Connection. Not a Member? Join us today at sae.org/join.
Video

Goal Setting Strategies

2016-03-01
Alyson Lyon, Executive Leadership Coach, discusses how accurately defining goals leads to success. Members can view the full version by logging into the Member Connection here Not a Member? Get a taste of the Member Connection and join at connection.sae.org.
Video

Time Management Strategies

2016-03-01
Alyson Lyon, Executive Leadership Coach, explains how the most successful people manage their time. Members can view the full version by logging into the Member Connection here Not a Member? Get a taste of the Member Connection and join at connection.sae.org.
Technical Paper

Surface Treatments and Characterization of Electroplated and Hot Dip Galvanized Steel Sheets

1996-04-01
91A126
Protection of surfaces is a critical factor in determining the extended service life of a structure in polluted and aggressive environments. In particular, a rapid growth of the technology for the protecting coating of cold rolled steel is experienced, for the use in transport, electric housewares, building and industrial plants. Numerous changes have taken place in the production of zinc coatings on steel in order to improve the corrosion resistance using zinc alloy platings. Our research group collected from the international production a number of selected galvanized steel samples, including electrodeposited zinc alloys, multilayer coatings, hot dip galvanized steels. On the selected materials we established and analyzed morphology, composition, crystal structure, impurity content and distribution, using many surface microanalysis techniques.
Technical Paper

Recycling Potential of Polymers

1996-04-01
91A123
In order to reduce the volume of waste in general and of shredder waste from the disposal of scrap cars, the German Federal Government has prepared a draft regulation, which will be implemented unless the automotive industry and the distributors of imported cars take action on their own to achieve these objectives. The regulation provides that the car manufacturers are fully responsible for the environmentally controlled disposal of scrap cars. The return of scrap cars to the work industry must be free of change for the last owner. A nation-wide network for the return of scrap cars must be implemented by end of 1993. To reduce the amount of shredder waste the automotive industry is expected to practice recycling on non-metallic materials. Facilities required for thermal treatment of residues, which cannot be recycled, are to be installed on account of the originator, i.e. the automotive industry.
Technical Paper

New Materials and Experiences for the Industrialization of Pu Structural Rim Technology

1996-04-01
91A122
Processes involving use of reactive polymers received recently considerable attention also for producing components suitable for automotive structural applications. In particular polyurethane structural RIM technology seems to be the route of choice in terms of productivity, reliability and physico- mechanical performances in order to fit the automotive industry needs in the production of parts requiring superior load bearing properties. In this frame the development of long pot life snap-cure resins, fast and effective reinforcement preforming techniques as well as the development of computerized provisional processing methodologies are of paramount importance in view of industrialization of the technology. In this paper a description of the work carried out by Enichem Montedipe and Montedison is given. In particular a new family of PU systems, based on special isocyanate variants, is reported.
Technical Paper

Recycling Automobiles: a Problem of Environment and Resources

1996-04-01
91A130
The socio-economic system is coming to the conclusion that the environment will no longer tolerate and absorb all of man's interventions, and that natural resources no longer constitute a cheap and inexhaustible source of wealth. In this scenario of the limits of nature and ever-increasing environmental costs, we are faced with the problem of recovering and reusing the materials which go into the manufacture of an automobile. The replacement of metal materials with polymer materials leads to a reduction in the re-usable waste, and to an increase in the amount of waste with no economic value, or even with a negative economic value. The use of the non-ferrous and non-aluminous materials in an automobile is beyond the capabilities of new techniques for scrapping automobiles, which means that at the end of their lives, the automobiles must be disassembled, sorted on the basis of the constitute materials, recovered and recycled.
Technical Paper

Application of Shape Memory Heat Engines to Improving Vehicle Fuel Economy

1996-04-01
91A128
Shape memory materials undergo temperature-induced martensitic phase transformations that involve reversible dimensional changes. In performing these changes in shape, the shape-memory material is able to do work against external constraints, and this is the basis for shape-memory low-temperature heat engines. The transformation temperatures on heating and cooling are often not very different (little hysteresis) and are well defined and reproducible. Furthermore, these temperatures can be adjusted by varying the composition of the shape memory alloy. Internal combustion engines dissipate approximately two-thirds of the fuel energy as heat to the exhaust and coolant systems. A low-temperature heat engine could convert a fraction of this heat energy to useful work. This paper discusses the conceptual basis for the application of shape memory heat engines to internal combustion engine powered vehicles. Metallurgical and thermodynamic factors are discussed, as well as engine efficiency.
X