Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Camera Monitor Systems Test Protocols and Performance Requirements

2017-09-13
WIP
J3155
This SAE Recommended Practice provides test protocols with performance requirements for Camera Monitor Systems to replace existing statutorily required inside and outside rear-view mirrors for US market road vehicles. This practice expands specific technical content while retaining harmonization with the FMVSS 111 Rear Visibility standard, and other international standards. This is accomplished by defining required roadway fields of view as specific fields of view (FOV) displayed inside the vehicle. Specific testing protocols and/or specifications are added to enhance ease of use using straightforward language and any specifications are intended to be independent of different camera and display technologies unless otherwise explicitly stated.
Video

Review and Assessment of the ISO 26262 Draft Road Vehicle - Functional Safety

2012-09-18
ISO 26262 is the first comprehensive automotive safety standard that addresses the safety of the growing number of electric/electronic and software intensive features in today's road vehicles. This paper assesses the standard's ability to provide safety assurance. The strengths of the standard are: (1) emphasizing safety management and safety culture; (2) prescribing a system engineering development process; (3) setting up a framework for hazard elimination early in the design process; (4) disassociating system safety risk assessment from component probabilistic failure rate. The third and fourth strengths are noteworthy departure from the philosophy of IEC61508. This standard has taken much-needed and very positive steps towards ensuring the functional safety of the modern road vehicles. SAE publications from industry show a lot of enthusiasm towards this standard.
Video

Design and Flight Test of a Primary Flight Display Combined Vision System

2012-03-19
A series of flight tests were conducted to design and evaluate a Combined Vision System (CVS) that integrates a forward looking infrared video image with synthetic vision on a primary flight display. System features included colorizing the video image to mesh with the synthetic terrain background, decluttering the approach symbology to facilitate the detection of the approach lights and runway markings, creating a semi-transparent IR sky to ensure continuous situational awareness of the surrounding terrain, and annunciating the decision height to facilitate the transition to the actual runway environment. Over 100 approaches were flown during three flight test sessions. For the first flight test session pilots reviewed early CVS proofs of concept on Honeywell's Citation Sovereign.
Video

A Quantitative Risk Analysis for AeroMACS Network Security in SESAR

2012-03-16
The growing need for an efficient worldwide airspace system management, generated by an increasing traffic load, requires new capabilities for air-ground data communication technologies. In order to cope with these requirements, the Federal Aviation Administration (FAA), EUROCONTROL, and the International Civil Aviation Organization (ICAO) have jointly made specific recommendations for candidate technologies for the airport surface communication network. In the SESAR project, the Aeronautical Mobile Airport Communication System (AeroMACS) technology is being developed in such a way to provide next generation broadband and wireless data communications for airport surface applications (i.e. Air Traffic Control ? ATC, Airline Operational Communications ? AOC, and surface vehicles services).
Video

Ice Phobic Coatings for Control and Covered Surfaces

2012-03-14
Silicones have been utilized in multiple industries in the last 50 years and their applications are still expanding as technology grows. Ice phobic coatings, as an example, have been utilized on lock walls, navigation channels, wind turbines, hydropower intakes, and aircraft. Without protection these applications have a high risk of failure in the functions they perform. For example, ice build up on an aircraft?s aerodynamic surfaces increases drag which reduces lift during flight operations. Utilizing a silicone ice phobic coating significantly reduces the adhesion of ice to aerodynamic surfaces. Compared to other polymeric materials, silicones are known for their broad operating temperature range and lend themselves to excellent performance in a variety of harsh environments. Especially in low temperatures where ice adhesion is a concern, silicones retain their elastomeric physical properties and low modulus.
Standard

Ice Crystal and Mixed Phase Icing Tunnel Testing of Air Data Probes

2018-04-16
WIP
AIR6974
This document provides information on current practices for testing air data probes to 14 CFR Part 33 Appendix D ice crystal and mixed phase icing conditions. This AIR is primarily concerned with techniques for measuring the flow and icing environment in the test facility. While the focus of this report is the testing of air data probes, techniques described may be applicable to Appendix D tests of other aerospace equipment as well.
Standard

Ice Protection for Unmanned Aerial Vehicles

2017-09-22
WIP
AIR6962
A review of icing materials that would be educational to a designer of a UAV ice protection system is provided. Additionally, the differences between unmanned and manned ice protection systems are explored along with a discussion on how these differences can be addressed.
Standard

Using STPA During Development and Safety Assessment of Civil Aircraft

2018-02-13
WIP
AIR6913
This AIR will provide a basic understanding of STPA and how it can be applied to development and safety assessment of civil aircraft. It will explain, by way of an example, the information needed to begin STPA, the expected STPA outputs, and the phases of aircraft development and safety assessment that can be supported by STPA.
Standard

Snowcompressor

2017-07-28
WIP
ARP8000
This SAE Aerospace Recommended Practice (ARP) document covers the requirements for a Snowcompressor with carrier vehicle used to clear snow from airport operational areas by compressing the volume of collected snow into smaller volumes for loading into a hauling/dump truck or for depositing reduced-volume windrows for snow banking. The term carrier vehicle represents the various self-propelled prime movers that provide the power necessary to move snow and ice control equipment during winter operations. For two-stage rotary plows that primarily are used to cast heavy concentrations of snow away from airport operational areas such as runways and taxiways, see ARP5539.
Standard

Tests Recommended for Qualifying an Artificial Bird for Aircraft Certification Testing

2018-03-27
WIP
ARP6924
This document defines the Level 1 tests required for qualifying an artificial bird for certification testing of aircraft and aircraft engines. Level 1 refers to the lowest level of the test pyramid associated with the building block approach defined in the CMH-17 Composite Materials Handbook. The test pyramid consists of a sequence of 5 levels of testing, ranging from the most basic at the lowest level of the pyramid to the most complex at the apex. Typically the number of tests performed has an inverse relationship to the complexity of the tests. The building block approach is used for defining the tests required to qualify an artificial bird that would be accepted by regulatory agencies for certification testing of aircraft, including rotorcraft, fixed wing fuselages and engines, where bird strike testing is currently required. This document only describes the tests required for Level 1 of the test pyramid. Separate documents define the tests required at higher levels.
Standard

Glycol Recovery Vehicle (GRV) – Self-Propelled

2017-06-12
WIP
ARP6954
This SAE Aerospace Resource Document (ARD) document covers the requirements for a self-propelled GRV, intended for use at airports to collect spent aircraft de-icing fluid (ADF) from the surface of de-icing areas. This unit will recover de-icing fluid from the surface, which will be stored in a containment unit on the vehicle. The GRV must be capable of night and day operations in all weather conditions, as required.
Standard

Snow Compressor - self propelled

2017-06-27
WIP
ARP6955
This SAE Aerospace Recommended Practice (ARP) document covers the requirements for a Snowcompressor with carrier vehicle used to clear snow from airport operational areas by compressing the volume of collected snow into smaller volumes for loading into a hauling/dump truck or for depositing reduced-volume windrows for snow banking. The term carrier vehicle represents the various self-propelled prime movers that provide the power necessary to move snow and ice control equipment during winter operations. For two-stage rotary plows that primarily are used to cast heavy concentrations of snow away from airport operational areas such as runways and taxiways, see ARP5539.
Standard

Runway Liquid Anti-icing / Deicing Spreaders

2017-08-02
WIP
ARP5559
This Aerospace Recommended Practice covers various requirements for Airport runway deicers, to be used with various carrier vehicles primarily used to treat the runway surface with an even coating of deicer fluids. It does not apply to non-airport snow and ice removal equipment such as highway plows or construction/farm machinery.
Standard

SLD capabilities of icing wind tunnels

2015-07-09
WIP
AIR6341
The purpose of this AIR is to compile in one definitive source, commonly accepted calibration, acceptance criteria and procedures for simulation of Supercooled Large Droplet (SLD) conditions within icing wind tunnels. Facilities that meet the criteria for either some or all of the recognized conditions will have known SLD icing simulation capability.
X