Refine Your Search

Topic

Author

Affiliation

Search Results

Book

Propulsion Systems for Hybrid Cars, 2ed

2010-01-01
Completely updated with the most current topics of interest on plug-in hybrid and battery electrics, this new book provides comprehensive coverage on all aspects of the hybrid vehicle design. Key aspects include hybrid propulsion system architectures, propulsion system sizing, electric traction system sizing and design, loss mechanisms, system simulation and vehicle certification. Practicing engineers and managers involved in hybrid vehicle development, modeling and simulation, and testing will find this book invaluable. Worldwide the automotive industry is being challenged to make dramatic improvements in vehicle fuel economy. Taking effect in 2012, the new rules set more aggressive fuel economy measures that will require significant gains in engine and driveline efficiency, better performance cabin climate control, and the introduction of electric hybridization.
Magazine

Automotive Engineering: June 2018

2018-06-01
Underway on nuclear power Ford Motor Co. CTO Dr. Ken Washington is driving new approaches to technology innovation—from inside and outside the enterprise. Silicon drives autonomy movement Renesas’ Amrit Vivekanand explains how the software and semiconductors that underlie the industry’s rapid transition are rapidly evolving. Automotive propulsion ‘On a journey’ CTO Jeff Hemphill explains how Schaeffler Group is blending its longstanding mechanical-systems expertise with critical investment in electrification and autonomy. Steeling for reduced mass and higher strength New 3rd-generation AHSS and steel-polymer hybrid tech aim to cut mass by up to 30%—and take a bite out of aluminum’s business. Balancing the rumble and roar Multiphysics simulation is part of the development toolset at Mahindra Two Wheelers, as the Indian motorcycle and scooter maker expands into global markets with larger bikes. Le Mans 2018: can anyone beat Toyota’s hybrids?
Video

SAE Demo Day in Tampa - City and State Perspectives

2018-08-14
Dramatic changes in transportation are coming. Cities and states looking to be at the forefront and reap the benefits, need an engaged and informed citizenry. Hear how the SAE Demo Day in Tampa supported Florida's AV initiatives and can benefit states nationwide.
Video

SAE Demo Day in Tampa - Public Perception

2018-08-14
The public sees endless reports about self-driving cars. Some are breathless, others scary. Yet outside of small tech and policy circles, few people have actually experienced this coming technology. SAE gave people the opportunity May 2018 in Tampa. Hear what they had to say after the experience.
Book

From Engineer to Manager

2002-01-01
If you are looking for a lively, down-to-earth experience in the journey to innovative engineering management, this is definitely the book for you. The author’s 20-plus year perspective indicates that, while most engineers will spend the majority of their careers as managers, most are dissatisfied with the transition. Much of this frustration is the result of lack of preparation and training. This book gives you a solid grounding in the critical attitudes and principles needed for success. The book teaches you how to internalize the attitudes and master the associated skills needed to excel in, and be satisfied with your transition to management. Learn how to communicate more effectively and improve relationships with your colleagues. Realize an improved use of your time, resulting primarily from learning and practicing a number of "soft" skills which flow from developing the necessary attitudes for management. Use your newly acquired skills to solve immediate problems.
Video

Your Bridge to Success in the Real World

2018-07-25
Students share how SAE Membership has opened doors for their careers, provided educational opportunities and hands-on experiences that has helped them to become a better engineer.
Video

SAE Moves You

2018-07-30
Meet the engineers shaping the world of mobility and driving the future of engineering.
Technical Paper

A Driving Simulator Using Microprocessors

1988-03-01
871156
An inexpensive driving simulation system with sufficient fidelity has been developed. The system produces motion cues of four degrees of freedom, visual and auditory cues, and control feel on the steering wheel. This paper describes the features of this newly developed system and gives examples that demonstrate its effectiveness. The motion cues provided in this system are yaw, heave, and lateral and fore/aft accelerations. The lateral and fore/aft accelerations are simulated by tilting the simulator compartment. A computer-processed road image is given through a CRT monitor. The restoring torque of the steering wheel is produced by an electrical servosystem via a coil spring. Cruising sound is given in order to improve speed perception. Since the system uses digital computers, the vehicle characteristics are altered easily by merely rewriting the software. This enables us to simulate special vehicle dynamics such as front & rear wheel steering.
Technical Paper

Engine Control System for Lean Combustion

1988-03-01
871171
In order to achieve lean burn engine control system, it is necessary to develop high accuracy air fuel ratio control technology including transient driving condition and lean burn limit expansion technology. This paper describes the following. 1 The characteristics of the transient response of the fuel supply are clarified when various kinds of air flow measuring methods and fuel injection methods are used. 2 To achieve stable combustion in lean mixture, fine fuel droplet mixture, whose diameter is less than 40 μm, needs to be supplied.
Technical Paper

Influence of the Dynamical Tyre Properties on the Motorcycle Driving Behaviour

1988-03-01
871227
The influence of the tyre properties on the driving behaviour of single-track vehicles has been measured by performing running tests with full-scale vehicles. The indoor dynamic tyre measurements using the sideslip angle as the input signal reveale that the sideforce and self-aligning moment characteristics are helpful explaining the measured driving behaviour. The obtained tyre parameters values and second order equations have been implemented in the simulation program ADINA-MOBSIP. This program is specially conceived for the simulation of the driving behaviour of single-track vehicles and is based on the finite element method.
Technical Paper

A Procedure for Evaluating Cycle Emissions from Raw Exhaust Gas Analyses

1988-03-01
871194
A procedure has been developed for evaluating equivalent drive cycle emission results from raw exhaust gas emissions data obtained from an engine under test on a computer controlled Vehicle Simulator Engine Dynamometer. The emitted species data is integrated with the air intake flow rate to determine the total mass of emissions, after correcting for the reduction in exhaust gas mass due to precipitation of the moisture of combustion. This procedure eliminates the need for the Constant Volume Sample (CVS) System attached to the vehicle exhaust while undergoing simulated drive testing on a chassis dynamometer to evaluate compliance of the test vehicle with the Australian Design Rules, ADR27 and ADR37. Sources of error with the procedure are examined by comparing the fuel consumption measured using a volumetric technique during the test with that evaluated by a carbon balance procedure as given in the Australian Design Rules.
Technical Paper

The Reality of Problem Solving

1999-05-10
1999-01-1626
Structured problem solving methods are utilized in the automotive industry for the efficient resolution of quality issues in manufacturing. Several problem solving methodologies have been developed, each with the same basic philosophy to prevent problem reoccurrence. Numerous barriers inhibit the effectiveness of problem solving. Although some tactical barriers may be overcome by training personnel, the majority of barriers are strategic or cultural in nature. Barriers at these two levels can only be removed by management level personnel. Management must shift its focus from firefighting to problem prevention. This shift can only be realized if problem prevention is addressed during design.
Technical Paper

Application of Shape Memory Alloys for Leading Edge Deicing

1999-04-20
1999-01-1585
Ice accumulation on aircraft wings during flight is a dangerous situation. To deal with this problem, current deicing systems either prevent ice accumulation by heating or break the ice layer once it is formed by dynamic motion of a leading edge device such as a boot. These systems may be deficient due to excessive energy requirements or ineffectiveness. In this project, the feasibility of using shape memory alloy (SMA) composite material for deicing purposes is investigated. SMA such as Nitinol wire has an unusual characteristic where it can be trained to generate a compressive strain upon application of an electric current through the wire. Several different versions of two inch radius semi-circular SMA composite specimen were manufactured and tested at Wichita State University. Ice was successfully shed in static icing tests while each of the subsequent versions reduced the power input requirement.
Technical Paper

Lean Ergonomics: Twelve Simple Rules to Fit Jobs to People

1999-05-10
1999-01-1636
This paper provides twelve rules to help reduce four key ergonomic risk factors (force, frequency, posture and mechanical stress). These rules were developed to assist individuals who may not have received extensive ergonomic training but who are involved in implementing any changes (major or minor) to manufacturing work stations. This includes changes in task and/or changes in equipment. A complete ergonomic analysis of a work situation is a good idea in most cases, but these rules will avoid many of the commonly occurring problems if applied early in the design or modification of a workplace.
Technical Paper

Preparing for High Performance Work Organizations – The UDM / GC Bachelor of Manufacturing Engineering Program

1999-05-10
1999-01-1637
There are many analogies between the development of education and industrial development in the United States during the 1900s. In both segments of our society the emphasis on quantity of output led to the use of ever more specialized tools and concepts with sub-optimization often reducing the overall output quality. More recently both education and industry, especially the manufacturing sector, have recognized the value added concepts of integration, i.e., applying a holistic approach to their operations. In so doing a new workplace has been defined, the “High Performance Work Organization” (HPWO) (1). The discussion of the effects this development has had on manufacturing of goods and services is left to other presentations in this conference. This presentation focuses on an example from education which illustrates how integration of experiential and academic activities has been set as the cornerstone of a new construct for engineering education.
Technical Paper

Gaining Engineering Competence in Plastics

1999-05-10
1999-01-1641
Plastics are largely regarded as commodity materials. However, they differ considerably from the materials which we became acquainted with during our college education. Although one can proceed to design plastic components and manufacture them without seriously considering a training program, the consequences can be substantial sacrifices to quality, development cost, part cost, and time to market, as well as adding a great deal of unnecessary stress to the workplace. This presentation explains why plastics are different and recommends a training curriculum that should be a part of strategic planning.
Technical Paper

Graduate Education in Manufacturing Engineering for the Automotive Industry of the Future

1999-05-10
1999-01-1638
This paper discusses the evolution of graduate education in manufacturing engineering and the curriculum needed to educate manufacturing engineers in the automotive industry. This paper examines the master's and doctoral curriculum in manufacturing engineering at the University of Michigan-Dearborn. Finally, it proposes future direction for graduate education in manufacturing that will be needed for the automotive industry of the future.
Technical Paper

A Photographic Investigation of Multi-Stage Fuel Injection in a Single Cylinder DI Diesel Engine

1999-05-03
1999-01-1501
Increasing concern about the impact of internal combustion engines on the environment has led to ever more stringent emission legislation, and the introduction of more sophisticated equipment to enable the requirements to be achieved. One way of improving the emissions from direct injection (DI) diesel engines is to use multi-stage fuel injection, and an investigation performed on such a system is reported in this paper. In this case, the multi-stage fuel injector caused an increase in the exhaust smoke at low load, and an in-cylinder photographic technique was used to examine why this occurred. A multi-stage fuel injector with a VCO nozzle was fitted to a small, high-speed, direct injection diesel engine fitted with a transparent piston for optical access. The combustion process was filmed using a high-speed 16 mm cine camera, and the fuel injection process was illuminated by a high power, copper-vapour laser.
Technical Paper

A Comparison of Gasoline Direct Injection and Port Fuel Injection Vehicles: Part II - Lubricant Oil Performance and Engine Wear

1999-05-03
1999-01-1499
Four 1998 Mitsubishi Carismas, two equipped with direct injection (GDI) and two with port fuel injection engines (PFI) were tested in a designed experiment to determine the effect of mileage accumulation cycle, engine type, fuel and lubricant type on engine wear and engine oil performance parameters. Fuel types were represented by an unadditised base fuel meeting EEC year 2000 specifications and the same base fuel plus synthetic deposit control additive packages. Crankcase oils were represented by two types (1) a 5W-30 API SJ/ILSAC GF-2 type engine oil and (2) a 10W-40 API SH/CF ACEA A3/ B3-96 engine oil. The program showed that specific selection of oil additive chemistry may reduce formation of intake valve deposits in GDI cars.. In general, G-DI engines produced more soot and more pentane insolubles and were found to be more prone to what appears to be soot induced wear than PFI engines.
X