Refine Your Search

Topic

Search Results

Standard

MAGNETIC RUBBER INSPECTION

1994-07-01
HISTORICAL
AMS2308
This specification covers the procedural requirements necessary for the performance of magnetic rubber inspection.
Standard

FLUORESCENT PENETRANT INSPECTION

1983-01-01
HISTORICAL
AMS2645H
This specification establishes a procedure for detection of defects by use of a fluorescent, penetrating liquid.
Standard

CONTRAST DYE PENETRANT INSPECTION

1991-10-15
HISTORICAL
AMS2646C
This specification establishes a procedure for detection of discontinuities open to the surface of parts by the use of a penetrating dye.
Standard

Fluoroscopic X-Ray Inspection

1945-08-01
HISTORICAL
AMS2650
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of 1-1-84. It is recommended that this specification not be specified for new designs. This cover sheet should be attached to the initial issue of the sUbject specification. Noncurrent refers to those procedures which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division does not recommend these as standard procedures for future use in new designs. Each of these "Noncurrent" specifications is available from SAE upon request. This specification has been CANCELLED by the Aerospace Materials Division, SAE, as of August, 1989. By this action, subject specification number and its title will be deleted from the active specification index of Aerospace Material Specifications.
Standard

Ultrasonic Immersion Inspection, Titanium and Titanium Alloy Billet, Premium Grade

2017-09-20
WIP
AMS2628B
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5.0 inches (127 mm) and over in nominal diameter. This inspection procedure has been used typically for locating internal defects such as cracks, voids, inclusions, and other structural discontinuities which may or may not be exposed to the surface in billets, but usage is not limited to such applications. Testing normally will be by longitudinal procedure, but shear wave procedure may be added when agreed upon by purchaser and vendor. This specification includes zoned inspection and digital data acquisition.
Standard

ULTRASONIC INSPECTION Thin Wall Metal Tubing

1995-02-01
HISTORICAL
AMS2634A
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Ultrasonic Inspection Thin Wall Metal Tubing

1996-11-01
CURRENT
AMS2634B
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

ULTRASONIC INSPECTION Thin Wall Metal Tubing

1991-10-01
HISTORICAL
AMS2634
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 in. (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Ultrasonic Inspection, Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders

1995-04-01
HISTORICAL
AMS2633B
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders. This procedure has been used typically for locating defects such as cracks, voids, spongy areas, and other discontinuities, but usage is not limited to such applications. This procedure is not applicable to austenitic steels where grain boundaries mask results. Immersion inspection is applicable to tubular products whose wall thickness is 0.5 to 9.0 inches (13 to 229mm). Contact inspection is applicable to tubular product whose wall thickness is 3.0 to 9.0 inches (76 to 229 mm).
Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

2016-11-29
CURRENT
AMS2636A
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

2012-09-24
HISTORICAL
AMS2636
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
Standard

Oil, Fluorescent Penetrant Water Washable

1999-08-01
HISTORICAL
AMS3156D
This specification covers a stable, non-corrosive oil or oil-like substance together with a dye or additives necessary to provide a water-washable, highly-penetrating fluorescent solution.
X