Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide

2012-04-13
HISTORICAL
J1939/5_201204
This document describes the application of the SAE J1939 recommended practices for compliance with on-board diagnostic malfunction detection system requirements for marine sterndrive and inboard spark ignition engines, as mandated by the California Air Resources Board (CARB). These Otto-cycle engines are not derived from automotive diesel-cycle engines.
Standard

Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide

2008-02-21
HISTORICAL
J1939/5_200802
This document describes the application of the SAE J1939 recommended practices for compliance with on-board diagnostic malfunction detection system requirements for marine sterndrive and inboard spark ignition engines, as mandated by the California Air Resources Board (CARB). These Otto-cycle engines are not derived from automotive diesel-cycle engines.
Standard

Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide

2017-10-13
CURRENT
J1939/5_201710
This document describes the application of the SAE J1939 recommended practices for compliance with on-board diagnostic malfunction detection system requirements for marine sterndrive and inboard spark ignition engines, as mandated by the California Air Resources Board (CARB). These Otto-cycle engines are not derived from automotive diesel-cycle engines.
Collection

Multi-Dimensional Engine Modeling, 2018

2018-04-03
This collection covers advances in the development and application of models and tools involved in multi-dimensional engine modeling: advances in chemical kinetics, combustion and spray modeling, turbulence, heat transfer, mesh generation, and approaches targeting improved computational efficiency. Papers employing multi-dimensional modeling to gain a deeper understanding of processes related to turbulent transport, transient phenomena, and chemically reacting, two-phase flows are included in this collection.
Standard

Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices

2006-09-27
CURRENT
J551/2_200609
The limits in this SAE Standard are designed to provide protection for receivers of all types of radio transmissions when used in buildings. As a result, receivers of radio transmissions used out-of-doors may not be protected by the limits specified. This publication applies to the emission of electromagnetic energy which may cause interference to radio reception and which is emitted from: a. vehicles propelled by an internal combustion engine, electrical means or both (see SAE J551/1 for definition); b. motorboats propelled by an internal combustion engine, electrical means or both; and c. devices equipped with spark-ignited internal combustion engines (see SAE J551/1 for definition). This publication does not apply to aircraft, traction systems (railway, tramway, and trolley bus), or incomplete vehicles.
Standard

Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices

1994-03-21
HISTORICAL
J551/2_199403
The limits in this SAE Standard are designed to provide protection for receivers of all types of radio transmissions when used in buildings. As a result, receivers of radio transmissions used out-of-doors may not be protected by the limits specified. This publication applies to the emission of electromagnetic energy which may cause interference to radio reception and which is emitted from: a. vehicles propelled by an internal combustion engine, electrical means or both (see SAE J551/1 for definition); b. motorboats propelled by an internal combustion engine, electrical means or both; and c. devices equipped with spark-ignited internal combustion engines (see SAE J551/1 for definition). This publication does not apply to aircraft, traction systems (railway, tramway, and trolley bus), or incomplete vehicles.
Standard

Spark Plug Installation Sockets

1996-11-01
HISTORICAL
J548/2_199611
This SAE Standard applies to spark plug installation sockets of the long length type which are to be used for installing spark plugs of the most commonly used sizes for the North American market.
Standard

Spark Plug Installation Sockets

1992-06-01
HISTORICAL
J548/2_199206
This SAE Standard applies to spark plug installation sockets of the long length type which are to be used for installing spark plugs of the most commonly used sizes for the North American market.
Standard

Spark Plugs

1992-06-01
HISTORICAL
J548/1_199206
This SAE Standard applies only to spark plugs used for ground vehicles and stationary engines. This document is intended to serve as a guide to dimensions common to the majority of current production spark plugs and future applications. It is not the intent of this document to prohibit the manufacture of spark plugs having dimensions differing from those presented. Many applications exist which require specialized or nonstandard spark plugs. It is recommended that this document be used in spark plug design and engine applications wherever possible. Whenever design situations arise that prevent the use of one of these standard spark plugs, a spark plug manufacturer should be contacted for guidance. Figures 1 to 13 and Tables 1A to 6 show typical configurations of unshielded and shielded spark plug designs, their dimensional characteristics, installation, threaded hole, and spark plug thread sizes.
Standard

Engine Oil Tests

2016-06-28
CURRENT
J304_201606
The purpose of this SAE Information Report is to describe test conditions and performance evaluation factors for both diesel and gasoline engine tests. Specifically, the tests described in this document are used to measure the engine performance requirements for engine oils described by the API Service Categories described in API Publication 1509, ASTM D 4485, SAE J183, and SAE J1423 standards, U.S. military specifications, and ILSAC GF Standards.
Standard

Engine Oil Tests

2007-03-26
HISTORICAL
J304_200703
The purpose of this SAE Information Report is to describe test conditions and performance evaluation factors for both diesel and gasoline engine tests. Specifically, the tests described in this document are used to measure the engine performance requirements for engine oils described by the API Service Categories described in API Publication 1509, ASTM D 4485, SAE J183 and SAE J1423 standards, U.S. military specifications, and ILSAC GF Standards.
Standard

Two-Stroke-Cycle Gasoline Engine Lubricants Performance and Service Classification

2003-07-31
CURRENT
J2116_200307
This SAE Standard was prepared by Technical Committee 1, Engine Lubrication, of SAE Fuels and Lubricants Council. The intent is to improve communications among engine manufacturers, engine users, and lubricant marketers in describing lubricant performance characteristics. The key objective is to ensure that a correct lubricant is used in each two-stroke-cycle engine.
X