Refine Your Search

Topic

Author

Affiliation

Search Results

Magazine

SAE Vehicle Electrification: February 11, 2014

2014-02-11
Inside the cell walls The high cost of lithium-ion batteries is a prison that has largely kept electric vehicles off the street; the keys to their release are more effective—but not more expensive—cell chemistries.
Standard

Performance based packaging standard for lithium batteries as cargo on aircraft

2016-03-18
WIP
AS6413
This standard is intended to demonstrate and document the control of the potential hazards from lithium cells or batteries (UN 3090 and 3480) when transported as cargo on aircraft. [still need to identify if we are addressing global (external fire) or local (battery internal failures)] This standard addresses the need to control the hazards which might arise from a failure from an individual cell by containing the hazards within the package. This specific hazards addressed within this standard are: • Uncontrolled fire • Rapid overpressure pulse within compartment
Standard

ARC Fault Interrupter, 270 VDC

2019-04-27
WIP
AS6087
Develop a standard for testing and evaluating direct current arc fault detection and interruption technologies.
Standard

Advanced methods for Wire Selection and Sizing for Aerospace applications

2019-05-30
WIP
AIR7497
This SAE Aerospace Information Report is intended to provide advanced methods for wire selecting and sizing in aerospace application as a continuation of AIR6540, Fundamentals in Wire Selection and Sizing for Aerospace Applications. Also, it will provide valuable information for the electrical design engineer to verify the proper wire selection and validate a set of system design requirements which includes meeting environmental and installation constraints.
Standard

Electric Drivetrain Fluids (EDF)

2019-04-24
WIP
J3200
This SAE Information Report is to assist those concerned with lubricants used in drivetrain components powered by electric powerplants. The information contained herein will be helpful in understanding the terms related to the properties of a lubricant used in electric drivetrains.
Video

SAE Demo Day in Tampa - City and State Perspectives

2018-08-14
Dramatic changes in transportation are coming. Cities and states looking to be at the forefront and reap the benefits, need an engaged and informed citizenry. Hear how the SAE Demo Day in Tampa supported Florida's AV initiatives and can benefit states nationwide.
Video

SAE Demo Day in Tampa - Highlights

2018-08-14
In May 2018, SAE International in partnership with THEA and leading AV technology companies gave citizens in Tampa a chance to test ride the future. The event included a pre- and post-ride survey, a ride in an automated vehicle, interactive displays and engagement with industry experts. See highlights of the event and feedback from participants.
Standard

ELA Standardization

2017-07-18
WIP
ARP6505
This AIR intends to better document and tabulate electrical load dynamics that influence power source capacity, power quality and stabiltiy.
Standard

Definition and Measurement of Beam Axle Efficiency

2019-12-04
WIP
J3218
This SAE Recommended Practice covers beam axles used in passenger car and light-duty truck applications. Beam Axles utilize differentials which are of the open, limited slip, locking or spool types, although other configurations are possible
Technical Paper

Tire/Road Interface Airborne Noise Characteristics Generation

1999-05-17
1999-01-1731
In recent years there has been much interest in problems involving the noise prediction and reduction inside and outside the vehicle. Tire/road exterior noise has been considered to be the major vehicle exterior noise source. However, this paper describes an investigation into the characteristics of the air pumping noise mechanism in terms of source locations and directionality. Some rubber tire/road air pumping noise measurements are presented, whereas some predicted results are computed based on the boundary element method (BEM) to display some parameters which are found to be difficult to be obtained experimentally.
Technical Paper

Using Simulation to Design a Lean Material Delivery System in an Automotive Body Shop

1999-05-10
1999-01-1643
A simulation study was undertaken to help design a material delivery system to support lean manufacturing in an automotive body shop. Since this was a greenfield facility, simulation analysis was employed in the very early design phase of the system to determine and quantify the limiting parameters of the proposed lean material delivery system. The simulation analysis evolved with the changes in the design parameters and assumptions of the facility. The updated information from the simulation model helped the designers to evaluate alternate concepts and understand some parameters better such as, traffic congestion, manpower, and storage area requirement.
Technical Paper

Artificial Neural Network Based Energy Storage System Modeling for Hybrid Electric Vehicles

2000-04-02
2000-01-1564
The modeling of the energy storage system (ESS) of a Hybrid Electric Vehicle (HEV) poses a considerable challenge. The problem is not amenable to physical modeling without simplifying assumptions that compromise the accuracy of such models. An alternative is to build conventional empirical models. Such models, however, are time-consuming to build and are data-intensive. In this paper, we demonstrate the application of an artificial neural network (ANN) to modeling the ESS. The model maps the system's state-of-charge (SOC) and the vehicle's power requirement to the bus voltage and current. We show that ANN models can accurately capture the complex, non-linear correlations accurately. Further, we propose and deploy our new technique, Smart Select, for designing ANN training data.
Technical Paper

Numerical Investigation of Vehicles Aerodynamics through Driving Tunnels

2000-04-02
2000-01-1579
Due to the rapid development in many parts of Egypt, construction of a wide road network is maintaining a rapid pace. But, those roads are affected by the overcrowded big cities. Thus, there is a growing need for driving tunnels to reduce the traffic problems and facilitate transportation. This issue is highly related to economic (fuel consumption) and environmental (pollution and noise) matters. Up to our knowledge, this paper represents the first numerical study to concern driving tunnels in the Middle East. Actual domestic tunnels and vehicles are computationally simulated. Investigations concentrate on flow behavior, especially overall drag coefficient and wake structure behind vehicles. Results show that many parameters, such as tunnel height, and vehicle height and speed, affect the aerodynamic characteristics through driving tunnels.
Technical Paper

Excitation of the Automobile Alternator with the Claw Pole Rotor by Means of Stator Winding

2000-04-02
2000-01-1572
It is known, that the alternator self-excitation is possible at capacitor loading [1]. From this follows, that the alternator excitation by means of capacitors connected to one or several stator windings, as from simple excitation winding is located on a rotor, is possible. In the report the excitation of the automobile alternator with claw pole rotor by means of capacitors connected to stator windings at rotor open excitation circuit is considered. Thus, for comparison the alternator idle characteristics are received both at excitation by means capacitors, and by means of a simple excitation winding. Besides the other electrical parameters of the alternator with claw pole rotor by experimental way are determined. On the basis of the received data the alternator digital model was developed, it takes into account the magnetic circuit saturation, by using of the received experimental idle characteristics.
Technical Paper

Advanced Lithium Solid State Battery Developments

2000-04-02
2000-01-1588
This paper presents a summary of a recent conference entitled Advanced Lithium Solid State Batteries Workshop that was held on July 13–15, 1999. The conference was sponsored by the Department of Energy's Office of Advanced Automotive Technologies, and the Office of Basic Energy Sciences' (BES) Division of Chemical Sciences. This paper presents a summary of the results and recommendations from the conference, including: A review of current research on solid state electrolytes and their interfaces with an emphasis on both applied and basic studies. The research includes theoretical studies of solid polymer electrolytes (SPEs), lithium ion transport in SPEs, and simulations of the electrolyte–cathode interface. Experimental results are presented on ion transport phenomena in SPEs (NMR and X–ray) and mechanical stresses on electrodes, among other topics.
Technical Paper

A Review of Battery Exchange Technology for Refueling of Electric Vehicles

2000-04-02
2000-01-1586
The limited energy storage and long recharge time of electric vehicle batteries have motivated several alternatives to in-vehicle slow charging. Solutions generally fall into three categories: (1) fast charging, in which batteries are charged in-vehicle at an accelerated rate, (2) battery material reloading or refueling, in which the energy-carrying elements of the battery are physically replaced or replenished, and (3) battery interchange, involving the complete exchange of the battery pack, usually with the aid of some semi-automated mechanism. Among these options, the last, battery interchange, has tended to receive the least industry attention, but has been an expansive topic of invention and novel deployment.
Technical Paper

Analysis of Vehicle Response Data Measured During Severe Maneuvers

2000-05-15
2000-01-1644
During the past few years, the National Highway Traffic Safety Administration's (NHTSA) Vehicle Research and Test Center has generated a plethora of reliable vehicle test data during their efforts to study vehicle rollover propensity. This paper provides further analyses of a small selection of some of the data. The analyses provided here derive in part from the previous work, trying to answer some of the questions spawned by earlier analyses. The purpose of this paper is to introduce several new concepts to the study of vehicle roll stability and provide case studies using the results available from the NHTSA testing. Results from several severe maneuvers are studied in detail to gain understanding of vehicle response in these cases.
Technical Paper

Fundamental Physics Behind New Suspension Concept for Automobiles

2000-05-01
2000-01-1647
The Transverse Leaf suspension with Superior Roll Axis is a new suspension concept for automobiles. It enables the load transfer during a turn to be more evenly redistributed between the two wheels on the same axle thus optimizing its tires lateral force capabilities. The TLSRA concept is made up of a single transverse leaf spring linking the middle of the sprung mass to the outer end of 2 transverse suspension arms per axle. Those transverse arms are mounted close to the middle of the sprung mass with their attachment points located above the mass centroïd. Each wheel assembly is mounted directly onto the free end of its respective suspension arm. Because body roll is now counteracting vertical load transfer during transient and permanent operating conditions, this suspension enables designers to keep spring stiffness low without compromising road handling.
Technical Paper

Development of Active-Traction Control System

2000-05-01
2000-01-1636
Active-TRAC (A-TRAC) is the system for off-road 4WD vehicles. This system consists of independent four wheel brake control system and engine torque control system. This system applies the brake to any spinning wheel, and sends torque to the other wheels with grip. Therefore, the vehicle gets strong LSD(Limited Slip Differential) effect, and it has the same traction performance as a center and rear differential locked vehicle. Because the vehicle with A-TRAC does not have a differential locking mechanism, it no longer has the phenomenon of tight corner braking, and it frees a driver from operating the differential locking system. Therefore anyone can easily enjoy off-road driving with A-TRAC.
X