Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Electrochromic Glazings for Use in Automobiles

1996-04-01
91A110
In the present paper we will outline the principles, designs, problems and benefits of electrochromic coatings and present our own laboratory results. The effect of electrochromic coatings on the thermal comfort of a parked vehicle is theoretically calculated and the results confronted with the performances of selective coatings.
Technical Paper

Multifunctional Glasses for Automotive

1996-04-01
91A109
The windows of a vehicle have to satisfy the following driver and passenger needs concerning visibility and climate perception both related to active safety: transparency, reluctance, dazzling, glare and diffused light (scattering). All functions are related to visibility and so to the optics of glazing, solar control, deicing, defogging, demisting. The task of material science is to find the multifunctional glasses solving simultaneously problems of visibility, safety and comfort. Particular kind of glasses, colored, wired, coated, electrochromic, liquid crystal, photochromic can be already considered solutions which can operate passively or actively. The example of passive solar control and active heatable coated glasses is shown as a possible practical multifunctional glass very soon.
Technical Paper

Trends and Forecasts for Turbocharging

1988-03-01
871147
Predictable and unpredictable forces will change the direction of the charge-air systems industry. The driver of diesel engine development will be the stringent emissions regulations of the 1990s. The drivers in the gasoline engine market will be improved fuel economy, performance, durability and emissions. Forces will also influence the charge-air marketplace, including changes in emission standards, national fiscal policies, political issues, fuel prices, alternate fuels and consumer tastes. The world community mandate for engines that are clean, quiet, durable and fuel efficient will be satisfied, increasingly, by first-tier component suppliers developing integrated systems solutions.
Technical Paper

Modeling and Measurement of Occupied Car Seats

1999-05-17
1999-01-1690
An overview of model development for seated occupants is presented. Two approaches have been investigated for modeling the vertical response of a seated dummy: finite element and simplified mass-spring-damper methods. The construction and implementation of these models are described, and the various successes and drawbacks of each modeling approach are discussed. To evaluate the performance of the models, emphasis was also placed on producing accurate, repeatable measurements of the static and dynamic characteristics of a seated dummy.
Technical Paper

Experimental Determination of the Noise Emitting Parts of a Rotating Tire in the European Research Project TINO

1999-05-17
1999-01-1732
One of the objectives in the European Research project TINO is to identify, in detail, the surfaces of a rotating tire which actually generate the radiated noise. The approach is completely experimental and is based upon the ASQ (Airborne Sound Quantification) technique. The quantification of the contribution of the different tire surfaces to the sound pressure measured under defined conditions is carried out through a process of near-field measurements during rotation of the tire and static acoustic transfer function measurements. The ASQ method is further developed and tested when focussing at the applications. In first instance, the procedure has been validated and fine-tuned under well-controlled boundary conditions at a tire chassis dynamometer. The results of this first investigation served also as a “reference” set of data which has been used for verification and validation of numerical tire models.
Technical Paper

Tire/Pavement Interaction Noise Source Identification Using Multi-Planar Nearfield Acoustical Holography

1999-05-17
1999-01-1733
In this study, multi-planar Nearfield Acoustical Holography (NAH) is used to investigate noise radiated from the front, side and rear areas of single tires on a two-wheel trailer. Contributions to the radiated noise from the leading edge, trailing edge, and sidewall of the tire are identified. Two tires - an experimental monopitch tire and a production passenger car tire - are evaluated on a smooth asphalt pavement at 58 km/hr. From the measured complex pressure, acoustic intensity is reconstructed on three planes surrounding the tire using modified NAH procedures. Additionally, sound power levels are presented in tabulated and spectra forms. Tire noise generating mechanisms are inferred based on the results.
Technical Paper

A Model-Based Failsafe System for the Continental TEVES Electronic-Stability-Program (ESP)

2000-05-15
2000-01-1635
The Electronic Stability Program (ESP) is a vehicle dynamics control system that supports the driver in critical driving situations. A basic component integrated in the ESP-system is an on-line sensor monitoring system which is mainly used for detecting faults in sensors as early as possible so that an erroneous control or system malfunction can be prevented. Aim of this contribution is to present a model based sensor monitoring system for ESP that was developed, implemented, and is produced in large volumes by Continental Teves.
Technical Paper

Bosch ESP Systems: 5 Years of Experience

2000-05-15
2000-01-1633
Although the total number of car occupants involved in accidents in Germany has not significantly reduced during the past 10 years, the number of fatalities has steadily decreased. Most of the severe accidents result from a loss of control of the car. The problem of the driver losing control of his car will be explained. This problem is then used to formulate the goal for the vehicle dynamics control system ESP (Electronic Stability Program, also known as VDC). The approach chosen to reach this goal will then be shown. It will be shown that the vehicle slip angle is a crucial indicator for the maneuverability of the automobile. Since the complete vehicle state is not readily available, estimation algorithms are used to supply the control algorithms with sufficient information. With the automatic control of the slip angle the required yaw moment can be generated by individual wheel slip control.
Technical Paper

Using μ Feedforward for Vehicle Stability Enhancement

2000-05-01
2000-01-1634
Vehicle stability augmentation has been refined over many years, and currently there are commercial systems that control right/left braking and throttle to create vehicles that remain controlled when road conditions are very poor. These systems typically use yaw rate and lateral acceleration in their control philosophy. The tire/road friction coefficient, μ, has a significant role in vehicle longitudinal and lateral control, and there has been associated efforts to measure or estimate the road surface condition to provide additional information for the stability augmentation system. In this paper, a differential braking control strategy using yaw rate feedback, coupled with μ feedforward is introduced for a vehicle cornering on different μ roads. A nonlinear 4-wheel car model is developed. A desired yaw rate is calculated from the reference model based on the driver steering input.
Technical Paper

Dynamic Analysis of Crew Seats and Cockpit Interiors

2000-05-09
2000-01-1674
Improved safety standards are becoming a focus of the aerospace industry. In particular, standards for occupant protection have been changed to include dynamic seat testing and occupant injury assessment. Methods to model these situations are evolving. A method of modeling an occupant on a crew seat during a sled test is presented. This method combines a rigid body occupant model with a finite element model of the crew seat structure. Validation to sled test results obtained with the model is also presented. Modeling dynamic events with MADYMO software has been proven to be efficient and accurate in many aerospace and automotive applications. Using this tool, a model was developed to investigate how modeling can be used efficiently to provide guidance in crashworthy design. Both finite element methods (FEM) and multibody techniques were used to create a detailed model of a typical aircraft crew seat.
Technical Paper

Design and Test of an Improved Crashworthiness Small Composite Airframe

2000-05-09
2000-01-1673
The goals of this NASA Phase II SBIR program were to develop design methodology to improve occupant survivability in small composite airplanes. Current technology small airplanes absorb crash energy primarily in the cabin structure. The current study tried to increase strength of the occupant compartment and design energy absorbing structure outside the passenger compartment. Dynamics of the crash event were analyzed using a PC version of DYNA3D. Four full scale tests in two crash scenarios were conducted at the NASA Impact Dynamics Test Facility with test parameters set to allow direct comparison with prior NASA/FAA tests. Results indicate that occupant survivability can be improved with moderate weight penalty.
Technical Paper

A Stochastic Approach for Occupant Crash Simulation

2000-04-02
2000-01-1597
Stochastic simulation is used to account for the uncertainties inherent to the system and enables the study of crash phenomenon. For analytical purposes, random variables such as material crash properties, angle of impact, human response and the like can be characterized using statistical models. The methodology outlined in this approach is based on using the information about the probability of random variables along with structural behavior in order to quantify the scatter in the structural response. Thus the analysis gives a more complete picture of the actual simulation. Practical examples for the use of this technique are demonstrated and an overview of this approach is presented.
Technical Paper

Improving the Ride & Handling Qualities of a Passenger Car via Modification of its Rear Suspension Mechanism

2000-05-01
2000-01-1630
This paper presents the results of a recent project of IKCo’s research center to modify the Paykan 1600’s rear suspension mechanism with the purpose of improving the car’s comfort, stability and handling qualities. The car was originally equipped with a solid rear axle with leaf springs. By replacing the original mechanism with a three-link mechanism with panhard bar and coil springs, the ride comfort and handling characteristics of the car were noticeably improved.3-D, nonlinear ride and handling models were developed and analyzed to determine the important kinematics and dynamic effects of the new mechanism on vehicle responses. To verify the analytical results, subjective tests were carried out on the vehicle. The results of these tests demonstrated remarkable improvement of the dynamics behavior of the car.
Technical Paper

A Simple and Efficient Description of Car Body Movements for Use in Virtual Prototyping and Ride Comfort Evaluation

2000-05-01
2000-01-1629
Ideally, ride comfort evaluation, or any field evaluating human perception of motion, would be greatly simplified if such evaluation could be made based upon a single number or a simple curve that correlates with the perception of motion. The paper describes a ride comfort descriptor of pitch movements that is simple to use in virtual prototyping and ride comfort evaluations. This descriptor, i.e. Pitch Indicator, is validated in a calculation model, ride comfort measurements and subjective evaluations.
Technical Paper

Utilizing a Genetic Algorithm to Optimize Vehicle Simulation Trajectories: Determining Initial Velocity of a Vehicle in Yaw

2000-05-01
2000-01-1616
A method was developed for determining the unknown initial velocity of vehicles in yaw based upon evidence of the vehicle’s trajectory. The problem is formulated as an optimization problem by minimizing the error between a simulation trajectory and the known vehicle trajectory as per tire marks. A search simulation is coded in Matlab. An objective function is formulated based upon the error between the search simulation’ trajectories and the trajectory prescribed by the tire mark evidence. Initial conditions and step driver inputs are the design variables. A genetic algorithm routine coded in Matlab, GAOT (Genetic Algorithm Optimization Toolbox), is implemented to determine the solution vector that results in a simulation trajectory that minimizes the objective function. Target simulations are created using EDVSM (Engineering Dynamics Vehicle Simulation Model). The optimization algorithm is implemented and errors in the resultant velocities are reported.
Technical Paper

Motorcycle Suspension Development Using Ride Comfort Analysis with a Laboratory Test System

1999-09-28
1999-01-3276
An analytical approach to developing motorcycle suspensions is presented. Typical uncontrolled and subjective evaluations that place limits on suspension development are curtailed through the use of a laboratory-based road simulation technique, which evaluates vehicle ride quality. Ride comfort is calculated using a specifically tailored NASA model after primary and secondary frequency regimes have been established for this type of motorcycle. Correlation between road and laboratory simulation is measured and compared to the road data variance. A designed experiment evaluates changes in ride quality as a function of suspension and tire pressure adjustments. Various suspension settings are repeated on the simulator and corresponding ride numbers are calculated for both environments. An analysis is performed to correlate ride quality improvements on the simulator with ride quality improvements in the field.
Technical Paper

Emulating the Behavior of Truck Drivers in the Longitudinal Control of Headway

1999-11-15
1999-01-3706
This paper describes control system and psychological concepts enabling the development of a simulation model suitable for use in emulating driver performance in situations involving the longitudinal control of the distance and headway-time to a preceding vehicle. The developed model has mathematical expressions and relationships pertaining to the driver's skill in operating the brake and accelerator (“inverse dynamics”) and the driver's perceptual and decision-making capabilities (“desired dynamics”). Simulation results for driving situations involving braking and accelerating are presented to aid in understanding the research work.
Technical Paper

Steering Performance Evaluation - Heavy-Duty Highway Tractor Wander Test

1999-11-15
1999-01-3764
Heavy-duty highway tractors are the topic of various studies and tests to understand vehicle wander as a contributing factor to driver fatigue. Subtle variations in steering system characteristics can create measurable differences in performance, and operators may have different subjective opinions of the same system. This paper's purpose is to examine wander test setup and data analysis for tests conducted on an International® Model 9200 tractor-trailer at the Navistar Technology and Engineering Center in Fort Wayne, Indiana. Instrumented data and subjective ratings were collected using five power steering gears, evaluated by six drivers, operating over a specific test route.
Technical Paper

Intelligent DC Power Management System

1999-11-15
1999-01-3749
Most heavy-duty vehicles including trucks, tractors, buses, ambulances, refrigerated trailers, passenger vehicles, electric vehicles and boats have high amp Direct Current systems. Unlike the majority of components and systems in such vehicles, DC electrical systems have undergone very few major improvements in recent years. The Intelligent Power Management System discussed in this paper can offer significant improvements in the DC power management of such vehicles. The primary benefits of this system include: improved reliability of all electrical components, early warning of impending failures, extended service life, optimized generation, storage and use of power, and reduced maintenance cost and vehicle downtime. This paper will describe the Intelligent Power Management System, its design, applications and benefits.
Technical Paper

How Diagnostics Contribute to Vehicle Productivity and Driver Retention

1999-11-15
1999-01-3751
This paper begins with an outline of the cost structure of operating a commercial vehicle. The focus is on maintenance costs and how diagnostics and prognostics can lower costs. The paper then describes a link between vehicle productivity, driver productivity and driver satisfaction. Examples of onboard and offboard diagnostic systems will be used to illustrate how users create a vehicle that is “the best place to work” for drivers.
X