Search Results

Standard

NOMENCLATURE—ROLLERS AND COMPACTORS

1986-01-01

HISTORICAL

J1017_198601

This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)

Standard

COMPONENT NOMENCLATURE - DUMPERS

1990-07-30

HISTORICAL

J1016_199007

This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.

Standard

Nomenclature - Rollers and Compactors

2011-10-27

CURRENT

J1017_201110

This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.

Standard

Metric Countersunk Holes for Cutting Edges and End Bits

2011-10-27

CURRENT

J1580_201110

this document is to be used on cutting edges and end bits in conjunction with metric bolts (reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are further defined in SAE J63.

Standard

METRIC COUNTERSUNK HOLES FOR CUTTING EDGES AND END BITS

1989-12-01

HISTORICAL

J1580_198912

this document is to be used on cutting edges and end bits in conjunction with metric bolts (reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are further defined in SAE J63.

Standard

FORMAT FOR COMMERCIAL LITERATURE SPECIFICATIONS—OFF-ROAD WORK MACHINES

1978-06-01

HISTORICAL

J1233_197806

This practice applies to certain off-road self-propelled work machines referenced in SAE J1116. It applies to most machines defined in SAE J1057a.

Standard

Commercial Literature Specifications - Off-Road Work Machines

2011-10-25

CURRENT

J1233_201110

This standard is applicable to off-road work machines - base machine and its equipment included in categories 1.1, 1.2, 2, 4, and 5 of SAE J1116.

Standard

DOZER CAPACITY

1980-02-01

HISTORICAL

J1265_198002

This recommended practice applies only to straight, angling, semi-U, and U-blade dozers for crawler and wheel tractors. It applies to angling blade dozers only in the straight (not angled) position.

Standard

DOZER CAPACITY

1986-05-01

HISTORICAL

J1265_198605

This recommended practice applies only to straight, angling, semi-U, and U-blade dozers for crawler and wheel tractors. It applies to angling blade dozers only in the straight (not angled) position.

Standard

CAPACITY RATING—DOZER BLADES

1988-03-01

HISTORICAL

J1265_198803

This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.

Standard

Cutting Edge—Optional Cross-Sections and Dimensions Loader Straight

2006-02-05

HISTORICAL

J1581_200602

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight

2011-10-25

CURRENT

J1581_201110

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

CUTTING EDGE—OPTIONAL CROSS-SECTIONS AND DIMENSIONS LOADER STRAIGHT

1989-09-01

HISTORICAL

J1581_198909

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

Hole Spacing for Scraper and Dozer Cutting Edges

2006-02-01

HISTORICAL

J737_200602

This standard is intended for cutting edge sections used on: a Tractor-scrapers as described in SAE J1057 and J728. b Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation.

Standard

HOLE SPACING FOR SCRAPER AND DOZER CUTTING EDGES

1989-08-01

HISTORICAL

J737_198908

This standard is intended for cutting edge sections used on: a Tractor-scrapers as described in SAE J1057 and J728. b Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation.

Standard

COMPONENT NOMENCLATURE—SCRAPERS

1990-07-01

HISTORICAL

J728_199007

This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.

Standard

COMPONENT NOMENCLATURE—SCRAPERS

1984-07-01

HISTORICAL

J728_198407

Standard

Nomenclature--Crawler Tractor

2002-02-21

CURRENT

J727_200202

This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.

Standard

NOMENCLATURE—CRAWLER TRACTOR

1986-01-01

HISTORICAL

J727_198601

This Standard provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.

Standard

Machine Slope Operation Test Code

2003-05-12

CURRENT

J897_200305

This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.