Search Results

Carbon fiber gets bigger footprint Manufacturers strive for the Holy Grail of composites manufacturing: consistency and repeatability. Safety on the floor Once add-ons that brought almost as many problems as benefits, safety techniques are now being designed into equipment before start-up. Taking measures of the machine New requirements and technologies advance the art of test and sensing. Looking, listening, recording, analyzing HUMS is established as an integral part of aviation's safety network, but more standardization is needed to broaden its effectiveness.

Management promotes sharing The extensive use of CAD tools in aerospace design brings many benefits, but also a number of challenges. Getting robots to multi-task The demand to fulfill continually increasing customer requirements forces suppliers to offer state-of-the-art system manufacturing solutions.

The Metallic Materials Properties Development and Standardization MMPDS-13 supersedes MMPDS-12 and prior editions of the MMPDS Handbook as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures Handbook that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March 2006. This document contains design information on the mechanical and physical properties of metallic materials and joints commonly used in aircraft and aerospace vehicle structures. All information contained in this Handbook has been reviewed and approved using a standardized process. The development and ongoing maintenance process involves certifying agencies, including the FAA, DoD, and NASA, and major material suppliers and material users worldwide. The information and procedures in this Handbook are continuously reviewed, and modified or removed as determined to be appropriate.

The Metallic Materials Properties Development and Standardization (MMPDS) Handbook, is an accepted source for metallic material and fastener system allowables recognized by the Federal Aviation Administration (FAA), all departments and agencies of the Department of Defense (DoD), and the National Aeronautics and Space Administration (NASA), within the limitations of the certification requirements of the specific government agency. MMPDS-09 supersedes MMPDS-08and prior editions of the MMPDS as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March of 2006.

The Metallic Materials Properties Development and Standardization MMPDS-15 supersedes MMPDS-14 and prior editions of the MMPDS Handbook as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures Handbook that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March 2006. This document contains design information on the mechanical and physical properties of metallic materials and joints commonly used in aircraft and aerospace vehicle structures. All information contained in this Handbook has been reviewed and approved using a standardized process. The development and ongoing maintenance process involves certifying agencies, including the FAA, DoD, and NASA, and major material suppliers and material users worldwide. The information and procedures in this Handbook are continuously reviewed, and modified or removed as determined to be appropriate.

DaimlerChyrsler integrates product, process, and plant CATIA software is the core around which DaimlerChysler hopes to establish a virtual manufacturing system that allows new vehicles--and the plants that manufacture them--to be designed simultaneously with full simulation and visualization. The right bead in the right place at the right time Loctite assures customers of quality by assuming more responsibility for the adhesive-dispensing process. New manufacturing and design solutions Several software products will begin the new millenium with enhancements adding to a list of others that continue to provide good functionality and capability to engineers.

Lighting the way Exterior lighting systems are not just contributing to safety, they are also changing cars' styling. Sensing a change As sensor use grows, providing input for all sorts of functions, engineers are responding to the design challenges through standardization and shared use of signal output. Attacking hybrid cost Hybrid-electric vehicle costs must be slashed significantly for the technology to become mainstream. HEV developers reveal many routes in the cost-reduction crusade. Engineering with the enemy In a program devoid of bloodshed, General Motors and Ford codeveloped a new six-speed automatic that is key to both companies' future vehicle plans. The program managers explain why they'd eagerly do it again. Drivetrain advances Japan's leading companies have focused development on reducing size, mass, and cost.

The Metallic Materials Properties Development and Standardization MMPDS-14 supersedes MMPDS-13 and prior editions of the MMPDS Handbook as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures Handbook that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March 2006. This document contains design information on the mechanical and physical properties of metallic materials and joints commonly used in aircraft and aerospace vehicle structures. All information contained in this Handbook has been reviewed and approved using a standardized process. The development and ongoing maintenance process involves certifying agencies, including the FAA, DoD, and NASA, and major material suppliers and material users worldwide. The information and procedures in this Handbook are continuously reviewed, and modified or removed as determined to be appropriate.

Adaptive trimming of composite parts Some of the techniques used in the Adaptive Manufacturing System are normal aerospace processes. The unique and enabling process is the scanning and adaptive trimming.

Making virtual vehicle design a reality A new virtual design approach for commercial vehicle concepts allows for purposeful design and integration of new concepts and technologies on the component level in an existing product portfolio, while not neglecting the need for standardization and modularity.

Future testing of active safety systems To speed up the introduction of active safety systems, efficient standardized test programs are needed, including alternatives to test-track testing. Engine management on a budget Tata Technologies engineers at the recent SAE Convergence event provided an inside look at how they developed the Nano's low-cost EMS and reduced development time and cost with extensive use of modern tools. Racing for the green Changes are coming to Indy Car and Formula One to focus on green technology that applies to production vehicles. Taking strides together SAE 2011 World Congress host company General Motors touts teamwork as a way to expand industry knowledge and encourage energy efficiency.

Published in 1996, as the 100th Anniversary of the automobile industry was celebrated in the United States, this book details the amazing story of how Detroit become the automobile capital of the U.S. All the of the automobile manufacturers in Detroit and surrounding areas are covered along with 49 additional topics that are woven in-between and presented in chronological order. This book includes over 500 time period photographs of factories, both inside and outside, personnel, cars, and logos. Readers will gain an appreciation for the talented people that created Detroit's automobile industry.

Thanks to years of research and development by vehicle manufacturers, suppliers, legislation, and the entire safety community, the side airbag has become a critical safety device to reduce injury and save lives. This new collection of technical research highlights the progression of these essential safety features, providing a complete and thorough perspective through the analysis of both early patents and recent side airbag system developments. Advances in Side Airbag Systems begins with an introduction by editor Donald E. Struble, chronicling the progress made since the mid-1980s in offering improved side impact protection to the motoring public. Authored by leading experts in their respective fields, this book features a comprehensive collection of 26 landmark technical papers. Its scope includes not only thorax airbags, but other inflatable devices designed for side impacts and rollovers.

Technology for small-engine emissions reduction Swiss researchers used a modern four-stroke engine in conjunction with a commercially available catalytic converter and special gasoline to develop a significantly cleaner-running walk-behind mower. Large-scale application of J1939 The SAE electronic systems communication standard provides a method for achieving engineering flexibility, product standardization, parts rationalization, service, and customer convenience. Focus on electronics OEMs and their suppliers are developing vehicle systems for improved vehicle operation and reliability/durability with the help of electronics. The following pages review some recent industry advancements. 2000 SAE International Off-Highway Congress: one for the ages From antique off-highway equipment to the latest in intelligent vehicle technology, the 2000 SAE International Off-Highway & Powerplant Congress & Exposition brings yesterday and tomorrow together today.

This specification covers established metric (SI) manufacturing tolerances applicable to non-cellular rubber products ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

The purpose of this standard is to provide a method for packaging aircraft software parts for distribution using contemporary media or by electronic distribution. This project intends to standardize and provide guidance for the storage of floppy based software, currently packaged in media set parts. This standard format can be then stored or distributed on a single physical media member (CD-ROM), or by electronic crate. The obsolescence of floppy disks drive an urgent need for this guidance.

This document defines an Aircraft Data Interface Function (ADIF) developed for aircraft installations that incorporate network components based on commercially available technologies. This document defines a set of protocols and services for the exchange of aircraft avionics data across aircraft networks. A common set of services that may be used to access specific avionics parameters are described. The ADIF may be implemented as a generic network service, or it may be implemented as a dedicated service within an ARINC 759 Aircraft Interface Devices (AID) such as those used with an Electronic Flight Bag (EFB). Supplement 8 includes improvements in the Aviation Data Broadcast Protocol (ADBP), adds support for the Media Independent Aircraft Messaging (MIAM) protocol, and contains data security enhancements. It also includes notification and deprecation of the Generic Aircraft Parameter Service (GAPS) protocol that will be deleted in a future supplement.

ARINC Specification 848 is a functional standard based on a protocol specification profile for a secured network interface. The purpose is to define a common method of initiating a mutually authenticated tunnel between an aircraft service and its Enterprise service. ARINC Specification 848 defines a standard implementation for securing the communications between an onboard Local Area Network (LAN) and an Enterprise LAN on the ground. Various aircraft network architectures and various air to ground communication channels (aka media) are accommodated in this document. For example, L-band Satellite Communication (Satcom), Ku/Ka-band Satcom, Gatelink Cellular, and Gatelink are considered.

With the increased demand for high volume, cost-effective, fiber-reinforced thermoplastic parts, the lack of high throughput systems has become more pronounced. Thermoforming as a method to generate complex shapes from a flat preform is dependable and fast. In order to use readily available, standard unidirectional impregnated thermoplastic tape in this process, a flat perform must be created prior to the thermoforming step. Formerly, creating the preform by hand layup was a time consuming and therefore costly, step. Fiberforge�?s patented RELAY� technology overcomes the challenges of handling thermoplastic prepreg tape and provides a solution through the automated creation of a flat preform, referred to as a Tailored Blank?. Producing a part for thermoforming with accurate ply orientation and scrap minimization is now as simple as loading a material spool followed by a pressing a start button. Presenter Christina McClard, Fiberforge

This publication provides, based on the state of standardization, an overview of the hardness testing of metals, plastics, rubber and other materials. It reports on technical developments such as the introduction of image processing in the Brinell and Vickers method, the adaptation of hardness testing machines to process-oriented testing conditions, and the development of highly accurate and efficient calibration methods.