Standard
Cotter Pins, Medium Carbon Steel Zinc Plated
2002-12-16
CURRENT
AMS7213
Search Results
Journal Article
Crashworthiness Performance of Multi-Cornered Structures under Quasi-Static Compression and Dynamic Axial Loading Conditions
2020-08-11
Abstract With increased consumer demand for fuel efficient vehicles as well as more stringent greenhouse gas regulations and/or Corporate Average Fuel Economy (CAFE) standards from governments around the globe, the automotive industry, including the OEM (Original Equipment Manufacturers) and suppliers, is working diligently to innovate in all areas of vehicle design. In addition to improving aerodynamics, enhancing internal combustion engines and transmission technologies, and developing alternative fuel vehicles, mass reduction has been identified as an important strategy in future vehicle development. In this article, the development, analysis, and experiment of multi-cornered structures are presented. To achieve mass reduction, two non-traditional multi-cornered structures, with twelve- and sixteen-cornered cross-sections, were developed separately by using computer simulations.
Standard
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Stress Relief Stretched
1969-11-01
HISTORICAL
AMS4128
Standard
ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Stress Relief Stretched
1979-01-01
HISTORICAL
AMS4128A
This specification covers an aluminum alloy in the form of bars and rods 0.500 in. (12.70 mm) and over in nominal diameter or least distance between parallel sides.
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
Compound, Rust Inhibiting Aircraft Engine Components
2020-04-29
CURRENT
AMS3060B
This specification covers a rust-inhibiting compound in the form of a liquid concentrate or a water soluble powder.
Standard
ALUMINUM BRONZE Silicon
1943-10-01
HISTORICAL
AMS4631
Standard
ALUMINUM BRONZE 90.9Cu - 7.2Al - 1.9Si
1951-03-01
HISTORICAL
AMS4631B
Standard
ADHESIVE, MODIFIED EPOXY Moderate Heat Resistant, 250 F (121.1 C) Curing, Film Type
1968-05-01
HISTORICAL
AMS3693
Standard
ADHESIVE COMPOUND, EPOXY High Temperature Application
1960-01-01
HISTORICAL
AMS3692
Standard
Adhesive Compound, Epoxy Resin High Temperature Application
2022-01-20
CURRENT
AMS3692C
This specification covers a two-component adhesive compound, an epoxy resin base and a hardener, in the form of a paste.
Standard
AERODYNAMIC FAIRING COMPOUND −55° to +85° C −67° to +185° F)
1974-03-01
HISTORICAL
AMS3696
This specification covers a two-component, air-curing, aluminum-powder-filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife.
Standard
BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATE NICKEL ALLOY (UNS N07001), .5625-18UNJF-3A
2022-01-14
CURRENT
AS9720
Standard
ADAPTER, FLARELESS TUBE, BULKHEAD AND UNIVERSAL TO FLARED TUBE
2017-01-05
CURRENT
AS21923C
Standard
ADAPTER, FLARELESS TUBE, BULKHEAD AND UNIVERSAL TO FLARED TUBE
2014-06-16
HISTORICAL
AS21923B
Standard
RIVET - 100° COUNTERSUNK HEAD, MILD STEEL
2011-08-16
HISTORICAL
AS125101B
Standard
RIVET - 100° COUNTERSUNK HEAD, MILD STEEL
2012-02-23
CURRENT
AS125101C
Standard
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A
2015-08-14
CURRENT
AS9533B
Standard
BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
2006-05-10
HISTORICAL
AS9533
Standard
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A
2007-11-20
HISTORICAL
AS9533A
