Search Results

Manned Space Systems are usually designed to support the crew atmospheric conditions equivalent to those at sea level. In phases with frequent Extra Vehicular Activities (EVA), a reduced pressure environment is preferable to facilitate the EVA suit prebreathing procedures. The Columbus Attached Pressurised Module (APM) will face both pressure scenarios during its life. Operation at different pressure levels primarily affects the performance of the Environmental Control System (ECS) of the pressurised elements. A lower air density results in reduced heat exchange, adversely affecting both the crew comfort and the electronics air cooling. This paper reports the results of a study performed to identify the constraints and the numerous potential problem areas related to APM operations at reduced pressure. Effects of the reduced pressure on the environmental parameters have been investigated.

As a consequence of the reduced funding by the ESA Member States contributing to the Columbus and Manned Transportation Programmes, the Columbus Project has undergone two major cost reduction exercises since 1993. An important cost reduction was achieved in mid '93 by downsizing the Attached Pressurized Module (APM) from 8 to 5 Double Racks equivalent length. To reduce the costs further, in 1994 the European space industry took the opportunity of exploiting specific features of the APM common with those of other projects, potential candidates being the Mini Pressurized Logistic Module (MPLM), developed by the Italian Space Agency (ASI) for NASA, or the European developed Russian Data Management System (DMS-R). In addition simplifications in System Function and in the Verification approach and maximum use of Off-the-Shelf and Commercial/Aviation/Military (CAM) hardware were investigated.

The Total Off-gassing test purpose is to determine the identity and quantity of trace gas contaminants offgassed in areas of spacecraft where the crew will breathe the atmosphere. Two different air sampling methods were adopted in parallel during the off-gassing tests on the Multi-Purpose Logistics Modules (MPLM) by Alenia Spazio. The first method, based on NASA (National Aeronautics and Space Administration) requirements, foresees storage of collected air samples into stainless steel pressure cylinders. The second method proposed by ESA (European Space Agency), uses trace contaminants adsorption on Carbopack™ filled ceramic tubes. Sample lines route the samples collected inside the MPLM cabin, to the respective external collection points. Successively, the stored samples are chemically analyzed by Gas Chromatography / Mass Spectrometry (GC/MS) techniques and the module offgassing rates are calculated.

The MPLM (Mini Pressurized Logistic Module) is one of the Elements constituting the ISSA (International Space Station Alpha). With respect to the other Elements, the MPLM is not permanently attached to the ISSA, but it is transported by the Orbiter several times from/to the Earth, since its primary use is to resupply and return cargos. The MPLM capability to support the logistic flights is guaranteed during several mission phases (ground, Orbiter transportation, on-orbit docked to the Station). Since the installed cargo can be passive or active, the required MPLM functions are based on the actual flight. This paper presents an overview of the activities performed in Alenia Spazio to identify the criticality and peculiarity of the MPLM mission scenarios from the thermal point of view. The best technical solutions, foreseen up to now, have been implemented in the design to guarantee the reliability requested by such an important and unique Space Station Element.

Under the guidelines established by the European Space Agency (ESA), a specific effort was devoted to define the preliminary design concepts for a Crew Transport Vehicle (CTV) compatible with the Ariane 5 launcher. The mission objectives of this vehicle include the possibility of transporting 4 people (and a limited amount of pressurized payload) to the International Space Station Alpha (ISSA), and returning them to Earth safely. Different options were identified at system level, however a modular vehicle was commonly adopted: a Crew Module (CM) designed to withstand the typical phases of the atmospheric re-entry and provide an adequate environment for the crew during all the mission a Resource Module (RM) envisaged to provide the propulsion provisions for orbital transfer and deorbiting; in addition it carries all the necessary resources to support the mission from lift-off until separation from the CM.

The Columbus Attached Pressurised Module (APM) Active Thermal Control System (ATCS) water loop collects the APM waste heat and transfers it to the Space Station Freedom (SSF) Central Thermal Bus (CTB). The interface between the APM water loop and the SSF ammonia loops is achieved with two ammonia/water interloop heat exchangers (IH/X), one being low temperature (LT) and the other moderate temperature (MT). The APM internal water loop provides cooling to payload and subsystem users which have varying temperature requirements at their heat rejection interfaces, and can be categorized as cold branch and warm branch users, (e.g. condensing heat exchanger (CHX) and refrigerator are cold branch users, while Avionic heat exchanger (AHX) and furnace payloads would be warm branch users.)

The Columbus fire suppression procedure is based on a centralized CO2 distribution system which injects the CO2 stored in a tank into the volume where the fire has to be extinguished. The fire is detected in each volume by means of the so-called REP (Rack Essential Package), which contains a fan and the smoke sensor. In order to assess the Fire Detection and Suppression design concept and to identify possible critical areas, Alenia Spazio - with the support of Flowsolve UK, and on behalf of EUROCOLUMBUS - has performed an analysis using a Computational Fluido-Dynamic (CFD) tool. The rack containing the water pump assembly and other electronic equipment has been chosen for the study. As far as the Fire Detection is concerned, the simulation intends to predict the flow field established in the rack by the ventilation system and the transport of smoke by this velocity field from a supposed point source.

Two-phase capillary loops are being extensively studied as heat collection and rejection systems for space applications as they appear to satisfy several requirements like low weight, low volume, temperature control under variable heat loads and/or heat sink, operation under on ground and micro gravity conditions, simplicity of mounting and heat transfer through tortuous paths. In 1998–2000 Alenia defined and Lavochkin Association developed the Deployable Radiator on the base of honeycomb panels, axial grooved heat pipes and Loop Heat Pipe. It was designed for on-ground testing.