Search Results

Metal matrix composites (MMCs) exhibit superior characteristics such as low weight, high stiffness, and high mechanical and physical properties. Inheriting such an outstanding combination of specifications, they are nowadays considered as the promising materials in the aerospace and biomedical industries. However, the presence of high abrasive reinforcing particles in MMCs leads to severe manufacturing issues. Due to the tool-particle interactions which occur during the machining of MMCs, high tool wear and poor surface finish are induced and those elements are considered as the main drawbacks of cutting MMCs. In this study, dry turning experiments were conducted for two different inserts and coated carbide on a bar of titanium metal matrix composite (Ti-MMC). Semi-finishing machining is operated with cutting parameters based on the tool supplier's recommendations which were not fully optimized. The maximum flank wear length (VBBmax) was selected as the tool wear criteria.

This paper presents CHT2D, a 2D hot air anti-icing simulation tool developed by the Advanced Aerodynamics group of Bombardier Aerospace. The tool has been developed from two main modules: the ice prediction code CANICE and the Navier-Stokes solver NSU2D, which is used to solve the hot air internal flow. A “weak” coupling beween the two modules based on function calls and information exchange has been priviledged. Three validation test cases are presented: for dry air conditions. Predictions from CHT2D agree quite well with the experiments. Preliminary results are also presented for a test case in icing conditions for different heat loads from the anti-icing system, to study the effect on the accumulated ice.

In civil aviation the main driver for Structural Health Monitoring (SHM) is to provide maintenance and ownership benefits. The maintenance benefits are defined in terms of improving maintenance planning, increasing inspection intervals and reducing inspection cost. The ownership benefits can be measured in residual value and life extension. In this paper different aspects of SHM implementation are discussed for fatigue monitoring and fatigue damage sensing with a consideration of minimizing challenges for SHM implementation. First, the current Fatigue Monitoring implementation scenarios for the most representative agile military aircraft are reviewed. In the following some aircraft utilization results obtained from analyzing different airlines are presented. The obtained results show a better possibility of categorizing fleet of an airline in comparison with agile military aircraft.

Manufacturing operations introduce unreliability into hardware that is not ordinarily accounted for by reliability design engineering efforts. Inspections and test procedures normally interwoven into fabrication processes are imperfect, and allow defects to escape which later result in field failures. Therefore, if the reliability that is designed and developed into an equipment/system is to be achieved, efforts must be applied during production to insure that reliability is built into the hardware. There are various ways to improve the reliability of a product. These include: Simplification Stress reduction/strength enhancement Design Improvement Using higher quality components Environmental Stress Screening before shipment Process Improvements, etc. This paper concentrates on ‘Manufacturing Process Improvement’ effort through the use of design of experiments, (DOE). Hence, improved levels of reliability can be achieved.

Bombardier faced new manufacturing process challenges drilling and fastening CSeries* aircraft panels with multi-material stacks of composite (CFRP), titanium and aluminum in which Gemcor responded with a unique, flexible CNC Drivmatic® automatic fastening system, now in production at Bombardier. This joint technical paper is presented by Bombardier, expounding on manufacturing process challenges with the C Series aircraft design requirements and Gemcor presenting a unique solution to automatically fasten CFRP aft fuselage panels and aluminum lithium (Al Li) cockpit panels with the same CNC Drivmatic® system. After installation and preliminary acceptance at Bombardier, the CNC system was further enhanced to automatically fasten the carbon fiber pressure bulkhead dome assembly.

The objective of this document is to present the methodology used to verify the structural integrity of a redesigned composite part. While shifting the manufacturing process of a composite part from pre-impregnated to a liquid resin injection process, the Composites Development team at Bombardier Aerospace had to redesign the component to a new set of design allowables. The Integrated Product Development Team (IPDT) was able to quickly provide a turnkey solution that assessed three aspects of airframe engineering: Design, Materials & Processes (M&P) and Stress. The focus of this paper will be the stress substantiation process led by the Stress Engineers. It will also bring up the synergies with M&P that are unique to the IPDT approach. The stress substantiation process required three distinct checks be confirmed.

The need for efficient manufacturing approaches has emerged with the increasing usage of composites for structural components in commercial aviation. Resin Transfer Molding (RTM), a process where a fiber preform is injected with resin into a closed tool, can achieve high fiber content required for structural components as well as improved dimensional accuracy since all surfaces are controlled by a tool surface. Moreover, RTM is well suited for parts that can be standardized throughout the aircraft, such as a fuselage frames and stringers. The objective of this investigation is to develop a preforming approach for a C-Shaped Fuselage frame. Two approaches are proposed: tri-axial braiding and hand lay-up of Non-Crimp Fabrics. The fiber architecture of the basic materials as well as the complete preforms is explained. The necessary preforming operations are detailed. The quality control measurement of fiber orientation and thickness are presented.

Non Destructive Inspection (NDI) of large Out of Autoclave Cure primary monolithic and sandwich Composite structures is challenging due to high requirement for flaw detection and characterization among porosity, delamination, disbond, foreign material, crushed core, dry fiber. Large scale NDI inspection with semi-automated and automated system is presented for flaw detection/characterization and porosity assessment methodology is described with results for high porosity level assessment in monolithic and sandwich structures.

In order to guarantee systems immunity, lightning induced electromagnetic energy has to be lower than the system's susceptibility threshold. This can be achieved, if the aircraft structure provides a good protection against lightning current as well as against its electromagnetic induced field. Moreover such a structure is also required to constitute a ground plane that guarantees very low common mode impedance between all grounded systems in order to keep them at the same electrical potential. The interaction of lightning with aircraft structure, and the coupling of induced energy with harnesses and systems inside the airframe, is a complex phenomenon, mainly for composite aircraft. Composite structures are either not conductive at all (e.g., fiberglass) or are significantly less conductive than metals (e.g., carbon fiber).

The safe operation of technical systems is a mandatory basic requirement for the entire industry. However, there are specific industries where the safety of operation is critical and is considered as a required characteristic. These types of industries include the aerospace, military, civil aviation, nuclear power, as well as chemical and automotive industries. Safety is everyone's responsibility but engineering plays the most important role in the course of achieving a safe product operation. There are two specific phases of the product life cycle where the safety characteristics should be addressed by engineering activities: the design and development and operation phases. Modern engineering education is oriented to provide future engineers with a sufficient background to be able to Conceive-Design-Implement-Operate.

Advanced commercial aircraft increasingly use more composite or hybrid (metal and composite) materials in structural elements and, despite technological challenges to be overcome, composites remain the future of the aviation industry. Composite and hybrid aircraft today are equipped with digital systems such as fly by wire for reliable operations no matter what the flying environment is. These systems are however very sensitive to electromagnetic energy. During flight, aircraft can face High Intensity Radiated Fields (HIRF), static electricity, or lightning. The coupling of any of these threats with airframe structure induces electromagnetic energy that can impair the operation of avionics and navigation systems. This paper focuses on systems susceptibility in composite aircraft and concludes that the same electromagnetic rules dedicated to all metal aircraft for systems and wiring integration cannot be applied directly as such for composite aircraft.

The lightning represents a fundamental threat to the proper operation of aircraft systems. For aircraft protection, Electromagnetic Compatibility requires conductive structure that will provide among all, electromagnetic shielding and protection from HIRF and atmospheric electricity threat. The interaction of lightning with aircraft structure, and the coupling of induced energy with harnesses and systems inside the airframe, is a complex subject mainly for composite aircraft. The immunity of systems is governed by their susceptibility to radiated or conducted electromagnetic energy. The driving mechanism of such susceptibility to lightning energy is the exposure to the changing magnetic field inside the aircraft and IR voltage produced by the flow of current through the structural resistance of the aircraft. The amplitude of such magnetic field and IR voltage is related to the shielding effectiveness of the aircraft skin (wiremesh, composite conductivity).

3D ice accretion codes have been available for a few decades but, depending on the specific application, their use may be cumbersome, time consuming and requiring a great deal of expertise in using the code. In particular, simulations of large 3D glaze ice accretions using multiple layers of ice is a very challenging and time consuming task. There are several reasons why 2D icing simulations tools are still widely used in the aircraft industry to produce realistic glaze ice shapes. 2D codes are very fast and robust, with a very short turn-around time. They produce adequate results in areas of the aircraft where 3D effects on airflow or droplets concentration can be neglected. Their use can be extended to other areas of the aircraft if relevant 3D effects can be taken into account. This paper proposes a simulation methodology that includes three levels of corrections to extend the use of 2D icing codes to most of the aircraft surfaces.

This paper presents work on the development of a low cost fuselage C-frame for aircraft primary structure using a Light Resin Transfer Molding (RTM) process. Compared to labor intensive hand layup prepreg technologies, Light RTM offers some substantial advantages by reducing infrastructure requirements such as hydraulic presses or autoclaves. Compared to Prepreg, Light RTM tooling creates two finished surfaces, which is an advantage during installation due to improved dimensional accuracy. The focus of this work was to develop means of achieving high fiber volume fraction structural frames using low cost tooling and a low volume manufacturing strategy. In this case a three piece Light RTM mold was developed using an internal mandrel. To achieve the strength requirements, a combination of crimped and non-crimped fabrics were selected for the reinforcing preform.

Implementing Design for Environment (DfE) into the design process requires a strategic integration. Furthermore, as DfE is continuously evolving, flexible processes need to be implemented. This article focuses on the integration of DfE into an optimization framework with the objective of influencing next-generation aircraft. For this purpose, DfE and Structures groups are developing together a set of new environmental indicators covering all life cycle stages of the product by coupling a list of yes/no questions with an environmental matrix. The following indicators are calculated: Regulation risk, Impact of manufacturing the part, CO2 emissions and Recyclability potential. These indicators will be used as constraints in the multi-disciplinary design optimization (MDO) framework, meaning that the structure will be designed while complying with environmental targets and anticipating future regulation changes.

Statistical process control (SPC) has been extensively used in many different industries including automotive, electronics, and aerospace, among others. SPC tools such as control charts, process capability analysis, sampling inspection, etc., have definitive and powerful impact on quality control and improvement for mass production and similar production systems. In aerospace manufacturing, however, applications of SPC tools are more challenging, especially when these tools are implemented in processes producing products of large sizes with slower production rates. For instance, following a widely accepted rule-of-thumb, about 100 units of products are required in the first phase of implementing a Shewhart type control chart. Once established, it then can be used for process control in the second phase for actual production process monitoring and control.

Ice adhesion on critical aircraft surfaces is a serious potential hazard that runs the risk of causing accidents. For this reason aircraft are equipped with active ice protection systems (AIPS). AIPS increase fuel consumption and add complexity to the aircraft systems. Reducing energy consumption of the AIPS or replacing the AIPS by a Passive Ice Protection System (PIPS), could significantly reduce aircraft fuel consumption. New coatings with superhydrophobic properties have been developed to reduce water adherence to surfaces. Superhydrophobic coatings can also reduce ice adhesion on surfaces and are used as icephobic coatings. The question is whether superhydrophobic or icephobic coatings would be able to reduce the cost associated with AIPS.

During its flight an aircraft can be struck by lightning and the induced high current will require a highly conductive airframe skin structure in order for it to propagate through with minimum damage. However an aircraft skin is generally coated with paint and the airframer does not always have control on the paint thickness. Paint thickness generates heightened concerns for lightning strike on aircraft, mainly because most of coatings dedicated to that purpose are non-conductive. Using insulating material or non-conductive coating with certain thickness may contribute to or increase damage inflicted by the swept stroke lightning energy, even on metallic structures Due to its high relative permittivity, a non-conductive paint or coating on a fuselage skin surface will contribute to slow down the lightning current propagation through structure. With this comes the risk of increasing heat that will favor structural damage and possible melt through.

This paper summarizes the techniques used during a microphone array test campaign performed at Pierre-Elliott-Trudeau Airport in Montréal, Québec (Canada) during the summer of 2012. Emphasis is put on the actual measurement campaign as only a limited amount of analysis has been performed at this stage. An aircraft position tracking tool is presented along with the beamforming algorithms that were used. Over 500 aircraft were recorded during this test. A comparison of known tonal sources associated to a specific aircraft type is made between different airlines in order to evaluate the repeatability of the method.

The composites development team at Bombardier Aerospace has pushed the Integrated Product Development Team to a new level. The team has been created outside the business priorities and was partially funded by a provincial government initiative to create a greener aircraft. A dedicated R&D team can reduce the gap between the different disciplines by encouraging them to work as one entity and rapidly develop high Technology Readiness Level (TRL) and high Manufacturing Readiness Level (MRL) solutions. Additionally, the interactions between the groups create a harmonization of the development philosophy and a sharing of the building block approach. This leads to a significant cost and lead time reduction in the coupon, element and detail testing. The constitution of the team also has a great impact on the level of expertise and the flexibility to adjust to new demands.