Search Results

An improved plasma reactor has been designed, built and evaluated. It is characterized by a reduced power per area ratio, relative to previous designs, and includes several improvements to run the whole system safely in a car. The new reactor design includes a concentric inner high voltage electrode, a grounded outer electrode, a shielded high-voltage and high temperature resistant electrical connection. A generator controller has been developed for better control of operating conditions as required during the engine cold start phase. The new generator/reactor system was installed in the exhaust pipe of a gasoline direct injection engine. HC emissions could be reduced up to 30 % in the first 40 seconds of a cold start test. In addition to HC treatment the dielectric barrier discharge has also been investigated as a method for regenerating a diesel particulate trap.

Fuel additives can contribute to maintaining the performance of diesel engines in a variety of ways. This holds true for current and future engine technology. Fouling of indirect injection engines (IDI) has been studied at length. Fouling of direct injection engines (Dl) is less known and less well understood. Problems associated with Dl fouling and a proposed mechanism for it are discussed. Additive effectiveness in preventing injector fouling is confirmed. Injector hole corrosion/erosion, as experienced in the Cummins N14 engine, can be avoided by the appropriate additive chemistry. Particulate traps can also benefit from ashless additive technology aimed at increasing the time between regeneration steps, hence improving effective trap life.

A comparison of two different types of NOx reducing catalysts will be worked out. The potential of two De-NOx catalysts using engine out hydrocarbon emissions for NOx conversion will be shown by variation of different engine parameters. An analysis of the hydrocarbon species upstream and downstream catalyst will demonstrate, which components are responsible for the NOx reduction in the exhaust gas of a lean burn engine. By variation of different parameters during adsorbtion and regeneration phases of the adsorber catalyst the efficiency in NOx reduction will be optimized. An assessment of the suitability for lean burn engines will consider the emission reduction efficiency as well as the influence on engine fuel consumption.