Search Results

In order to estimate the exposure to a crew in space, there are three essential steps to be performed: first, the ambient radiation environment at the vehicle must be characterized; second, the mass distribution properties of the vehicle, including the crewmembers themselves must be developed, and third a model of the interactions of space radiations with matter must be employed in order to characterize the radiation field at the dose point of interest. The Space Radiation Analysis Group (SRAG) at the NASA, Johnson Space Center carries the primary responsibility for the operational radiation protection support function associated with manned space flight. In order to provide support during the various planning, execution, and analysis/recording phase activities associated with a given mission, tools have been developed to allow rapid, repeatable calculations of exposure on orbit.

The International Space Station (ISS) has been continuously crewed for more than 2 years. One of the major systems for crew health, performance and psychological support is the food system. This paper documents the mechanics of implementation for the ISS food system, with emphasis on the U.S. portion of that system, and also provides some performance feedback received from the first 5 increment crews. Menu composition and planning, food stowage, on orbit preparation, shipments, and inventory control are also described.

A program has been initiated to develop a single set of man/system integration standards, requirements, and guidelines to design hardware and systems with which the space missions crew will interact. This paper describes the background, key issues, and methodology to be used in developing these standards. Included in the methodology is data collection and requirements analysis as well as technical monitoring and review, which includes a government/industry technical advisory group. This paper also briefly describes work performed on the Space Station Human Productivity study.

An experiment was performed to observe flow regimes and measure pressure drops of two-phase (liquid/vapor) flow and condensation in reduced gravity. Testing was conducted aboard the NASA-JSC KC-135 reduced gravity aircraft using a prototype two-phase thermal management system for large spacecraft. A clear section of two-phase line enabled visual and photographic observation of the flow regimes. The two-phase mixture was generated by pumping nearly saturated liquid refrigerant 114 through an evaporator and adding heat through electric heaters. The resultant two-phase flow was varied by changing the evaporator heat load, creating qualities from 0.05 to 0.80. Visual and photographic observation of vapor condensation was also made through a clear cover on the system condenser. During the flight tests, the experiment hardware was exposed to gravitational acceleration ranging from near-zero to 1.8 g's.

Micrometeoroid and orbital debris (MMOD) penetration hazards have been a concern for the large number of EVA’s (Extravehicular Activities) expected during the assembly and operation of the International Space Station (ISS). Earlier studies have shown large uncertainties in estimated spacesuit penetration risks. This paper reports the results of recent tests and analyses that have significantly expanded the Shuttle EMU (Extravehicular Mobility Unit) hypervelocity penetration database and clarified our understanding of the associated risks. The results of testing have been used to develop improved estimates of the cumulative risk of penetration during EVA's through the first ten years after the beginning of ISS construction. These analyses have shown that the risks of MMOD penetration during EVA will be somewhat less than the risk of a critical penetration of the ISS itself over the same ten-year period.

A preliminary assessment of the reach envelope and field of vision (FOV) for a subject wearing a Mark III space suit was requested for use in human-machine interface design of the Science Crew Operations and Utility Testbed (SCOUT) vehicle. The reach and view of two suited and unsuited subjects were evaluated while seated in the vehicle using 3-dimensional position data collected during a series of reaching motions. Data was interpolated and displayed in orthogonal views and cross-sections. Compared with unsuited conditions, medio-lateral reach was not strongly affected by the Mark III suit, whereas vertical and antero-posterior reach were inhibited by the suit. Lateral FOV was reduced by approximately 40° in the suit. The techniques used in this case study may prove useful in human-machine interface design by providing a new means of developing and displaying reach envelopes.

The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper provides a summary of the Node 1 Emergency Response capability, which includes nominal and off-nominal FDS operation, off-nominal ACS operation, and off-nominal THC operation. These subsystems provide the capability to help aid the crew members during an emergency cabin depressurization, a toxic spill, or a fire. The paper will also provide a discussion of the detailed Node 1 ECLS Element Verification methodologies for operation of the Node 1 Emergency Response hardware utilized during the Node 1 Element Qualification phase.

Water transferred from the Space Shuttle to the International Space Station (ISS) is generated as a by-product from the Shuttle fuel cells, and is generally preferred over the Progress which has to launch water from the ground. However, launch mass and volume are still required for the transfer and storage hardware. Some of these up-mass requirements have been reduced since ISS assembly began due to changes in the storage hardware (CWC). This paper analyzes the launch mass and volume required to transfer water from the Shuttle and analyzes the up-mass savings due to modifications in the CWC. Suggestions for improving the launch mass and volume are also provided.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system performance can be impacted by operations on ISS. This is especially important for the Temperature and Humidity Control (THC) and for the Fire Detection and Suppression (FDS) subsystems. It is also more important for Node 1 since it has become a convenient area for many crew tasks and for stowing hardware prior to Shuttle arrival. This paper will discuss the current requirements for ECLS keep out zones in Node 1; the issues with stowage in Node 1 during Increment 7 and how they impacted the keep out zone requirements; and the solution during Increment 7 and 8 for maintaining the keep out zones in Node 1.

NASA issued a Request For Information (RFI) to identify technologies that might be available to monitor a list of air pollutants in the ISS atmosphere. After NASA received responses to the RFI, an expert panel was assembled to hear presentations from 9 technology proponents. The goal of the panel was to identify technologies that might be suitable for replacement of the current Volatile Organics Analyzer (VOA) within several years. The panelists consisted of 8 experts in analytical chemistry without any links to NASA and 7 people with specific expertise because of their roles in NASA programs. Each technology was scored using a tool that enabled rating of many specific aspects of the technology on a 4-point system. The maturity of the technologies ranged from well-tested instrument packages that had been designed for space applications and were nearly ready for flight to technologies that were untested and speculative in nature.