Search Results

Space suits for advanced missions have baselined radiators as the primary means of heat rejection in order to minimize consumables and logistics requirements. While radiators have been used in the active thermal control system for spacecraft since Gemini, the use of radiators in spacesuits introduces many unique requirements. These include the ability to reduce the amount of heat rejection when overcooling or overheating of the crew member is a concern. Overcooling can occur with low metabolic rates, cold environments or a combination of the two, and overheating can occur with high metabolic rates in a warm environment. The main goal of the Radiator Advanced Demonstrator (RAD) program is to build and fly a radiator on the current Extravehicular Mobility Unit (EMU) in order to verify thermal performance capabilities in actual flight conditions. The RAD incorporates an aluminum plate separated from the primary water panel with a silicone gasket.

Spacecraft that must operate in cold environments at reduced heat load are at risk of radiator freezing. For a vehicle that lands at the Lunar South Pole, the design thermal environment is 215 K, but the radiator working fluid must also be kept from freezing during the 0 K sink of transit. A radiator bypass flow setpoint control design such as those used on the Space Shuttle Orbiter and ISS would require more than 30% of the design heat load to avoid radiator freezing during transit - even with a very low freezing point working fluid. By changing the traditional active thermal control system (ATCS) architecture to include a regenerating heat exchanger inboard of the radiator and using a regenerator bypass flow control valve to maintain system setpoint, the required minimum system heat load can be reduced by more than half. This gives the spacecraft much more flexibility in design and operation. The present work describes the regenerator bypass ATCS setpoint control methodology.

The optimum radiator configuration in hot lunar thermal environments is one in which the radiator is parallel to the ground and has no view to the hot lunar surface. However, typical spacecraft configurations have limited real estate available for top-mounted radiators, resulting in a desire to use the spacecraft's vertically oriented sides. Vertically oriented, flat panel radiators will have a large view factor to the lunar surface, and thus will be subjected to significant incident lunar infrared heat. Consequently, radiator fluid temperatures will need to exceed ~325 K (assuming standard spacecraft radiator optical properties) in order to provide positive heat rejection at lunar noon. Such temperatures are too high for crewed spacecraft applications in which a heat pump is to be avoided.