Search Results

When the planing craft with outboard motor is running, cavitation occurs around the surface of propeller and lower unit of outboard motor. Cavitation has been classified under several categories by the feature and cause of occurrence. Among them, cloud cavitation and root cavitation lead to erosion damage on the surface of lower unit and propeller. To prevent from poor appearance or performance deterioration of outboard motor by erosion damage, it is important problem to predict the erosion occurrence. Currently we can predict the cavitation phenomena sufficiently, but the area of cavitation does not necessarily correspond with the area of erosion. In this study, we present the new method to predict the area of erosion due to cavitation using CFD (computer fluid dynamics) analysis. In order to evaluate the accuracy of erosion occurrence simulation, the simulation results are compared against the result of a full-scale cruising test.

The electrodeposition painting can make a coat adhere not only to the exterior surface but also on the inside of an object, and has excellent corrosion resistance. Therefore, it is widely used as paint for anti-corrosion to various vehicles. In electrodeposition painting, by the electricity from an electrode flowing into the surface of an object through paint solution, a paint deposits to the surface of an object and a paint film is formed. Therefore, if the object is simply in contact with paint solution, a paint film will not necessarily be formed. For example, even if paint solution has touched, since the electrical resistance of paint solution is not high, sufficient current flows through the outside of a motorcycle frame, nor the inner surface of the automobile body and a paint film may not be formed. In order to check the paint film thickness of electrodeposition painting conventionally, it was measuring by disassembling the actually painted object.

A resin coating was applied to a piston skirt for use in an internal combustion engine to reduce the frictional resistance on its surface. The purpose of the authors' study was to observe the change in surface states with the addition of nylon and graphite to the coating as solid lubricant particles in order to investigate the tribological properties of the surface. The authors observed self-formed microdimples on the resin surface when nylon particles were added to the polyamide-imide (PAI) coating material. These microdimples functioned as oil reservoirs similar in size to the nylon particles. The authors used PAI as a binder, and graphite particles (5 μm) and two different grades (5 and 10 μm) of nylon-12 particles as additives. These materials were mixed in a solvent, and an aluminum test sample was coated. The test sample was then heated in an oven to cure the PAI. Next, the texture of the surface was observed.

Lead-added free-cutting steel has been used by many parts which need high machinability because lead improves chip friability and drill life. However, the demand of lead reduction increases in recent years, because of environmental impact substance reduction. Therefore, we developed lead-free crankshaft for motorcycle. Until now, crankshaft for motorcycle has been manufactured with lead-added free-cutting steel by a following process; Hot-Forging - Quenching and Tempering (QT) - Prior Machining - Nitrocarburizing - Finishing process because of strength and machinability. When we tried to change steel to lead-free, we examined to change to sulfur-added free-cutting steel. However, chip friability of sulfur-added free-cutting steel is inferior to lead one. Thus, we concerned about increase in machining expense. Then, heat-treatment after forging was examined to change from QT to normalizing for reducing the heat-treatment expense.