Search Results

The regenerative characteristics of a diesel particulate filter have been experimentally examined. The effect of particulate accumulation on system backpressure was of primary interest. To improve particulate regeneration, a copper compound was added to the fuel. The test results demonstrate that copper-containing fuel additives improve the regeneration characteristics of the filter, maintaining system backpressure at an acceptable level. Improved regeneration performance is expected to extend the operating range and life of the filter system. A model describing regeneration characteristics was developed to indicate the benefits of fuel copper concentration in controlling system backpressure.

There is concern over water-in-oil emulsion formation in passenger cars in the field. Crankcase pressure measurements in the ASTM Sequence IID rust test have been used to indicate possible emulsion formation tendencies of lubricants. This paper presents the development of a short duration emulsion fleet test procedure which demonstrates low car-to- car variability and correlates well with a previous fourmonth winter emulsion fleet test. Physical emulsion characteristics and used oil analyses are described. Evaluation of both Sequence IID reference oils and commercial oils in this field test reveals a lack of correlation between Sequence IID crankcase pressure results and field performance. The new procedure has been applied to investigate the impact of additive and base oil variations on the emulsion-forming tendencies of lubricants in the field. Base oil variables such as viscosity grade, composition, and volatility were evaluated.

The technology has been developed which will allow manufacturers to produce cars capable of running on methanol/gasoline blends with a methanol content up to 85% (i.e., M85). These cars will operate on varying methanol/gasoline ratios without any adjustments from the driver. The dual-fuel capability is attractive since vehicle use will not be handicapped by a restricted fuel distribution system. In addition, it provides the option of running on an environmentally “cleaner” fuel where it is available. The advent of fuel-flexible vehicles encourages the development of lubricants which will satisfy the demands of both fuels. The unique properties of methanol, however, increase the challenges of meeting the lubricant performance needs. Field and engine dynamometer testing have been aimed at understanding the response of key lubricant variables with M85. Short-trip, cold-weather conditions have been of particular concern.

The use of a copper diesel fuel additive in an emission control system improves particulate oxidation. This expands the operability of available systems by reducing the particulate mass loading and related external energy consumption required during regeneration. Easier, more frequent regenerations improve overall engine/system efficiency and reduce thermal stress on filtration media. Procedures for optimizing additive use are presented. In addition, the results from a health study are reviewed.

Two prominent trends are facing diesel engine builders and their customers, environmental regulations and cost containment. Increasingly stringent exhaust emissions regulations have necessitated major changes in diesel engine design. Combustion temperatures and fuel injection pressures continue to rise. This and other factors, such as lower oil consumption for exhaust particulate reduction, place greater demands on crankcase lubricating oils. Another prominent environmentally related cost factor facing fleet operators is that of waste oil management. The inventory and disposal of used lubricants must now be handled in accordance with regulated guidelines and their associated costs. To compensate, new lubricant categories have been designed in both North America and Europe, such that 1994 and later emission controlled engines will perform as reliably as their earlier counterparts.

This paper describes the development of a image analysis system that can be used to rate injectors from the Cummins L10 Injector Depositing Test. In the procedure, injectors are mounted on a computer controlled turntable and scanned using a CCD camera focused on the labyrinth flow area of the injector. The scanned monochrome images are processed and assigned an average gray scale rating. Results from the image analysis system are compared to the modified CRC Piston and Ring Rating method currently used within the Cummins test procedure. To do this, a series of injectors that have been rated by trained raters at a recent workshop were also rated via the image analysis system. The image analysis system ratings demonstrated a strong correlation (R = 0.85) to the CRC ratings. Using these same injectors, the image analysis method shows improvements in repeatability and reproducibility of approximately 50% over the current procedure.

A test method has been developed which provides for the rapid measurement of the scuffing performance of diesel fuel using the Ball-On-Cylinder Lubricity Evaluator (BOCLE). A test can be completed in less than one hour. Data has been generated indicating that the method achieves good discrimination between fuels of varying lubricity and correlates well with fuel performance as measured in pump tests.

Modern agriculture has evolved dramatically over the past half century. To be profitable, farms need to significantly increase their crop yields, and thus there are amplified demands on farming equipment. Equipment duty cycles have been raised in scope and duration, as the required output of the agricultural industry to sustain a growing population has stimulated the need for further advances in effective productivity gains on the farm. The mainstay mechanical assistant to the farmer, the tractor, has also evolved with the changes in modern agriculture to meet the requirements of these newer tasks. Larger, more capable vehicles have been introduced to help farmers efficiently meet these demands. At the same time, the current generation of tractor diesel engine lubricants has facilitated high levels of performance in the agricultural equipment market for many years. This is a testament to the role modern lubricants play in productivity in such a critical industry.

Accurate, timely field test results are necessary to develop and validate lubricants meeting frequently changing performance requirements. Field tests can also provide valuable information about performance deficiencies (e.g., soot related wear) which are not apparent in laboratory development tests. Since field tests are time intensive and increasingly expensive, it is imperative that the data generated provide meaningful results with reasonable expenditures. The data generation and analysis process are being constantly improved according to the principles of quality management. Part of the process improvement focuses on accurate, realistic treatment of the data since more variation is typically observed in field tests than in laboratory tests. One of the most difficult analytical processes occurs with oil consumption data.

Recent commercial specification revisions for automatic transmission fluids (ATFs) have focused upon more stringent friction requirements. More stringent friction durability characteristics are assessed using the SAE No. 2 tester. The commercial specifications do not include provisions to evaluate low speed friction characteristics, which have been shown to relate to torque converter shudder. This paper focuses upon effective use of the Falex 6 Multispecimen Tester to evaluate friction durability and to evaluate low speed friction characteristics in conjunction with low speed friction apparatus (LVFA) testing. Falex 6 testing agreed with torque fade observed in SAE No. 2 tests. Low speed stick-slip durability characteristics were effectively differentiated for a number of field ATFs. Falex 6 testing coupled with LVFA testing was shown to correlate with field experience and other test methods related to torque converter shudder.

Motorcycle manufacturers have recognized that highly friction modified passenger car oils can be deleterious to clutch performance, leading to clutch slippage. To address this issue, a JASO specification for four-stroke motorcycle oils was developed in 1999, categorizing oils into high friction oils termed JASO MA and low friction oils termed JASO MB. The high friction oils were preferred for most motorcycles where the engine oil also lubricates the clutch and gears. New motorcycle transmission technologies have increased the number of dry clutch applications which has led to an increased demand for JASO MB oils to improve fuel efficiency. While JASO MB oils contain friction modifiers to improve initial fuel economy, the motorcycle specifications have not addressed the fuel economy durability of motorcycle oils.

Interactions between automatic transmission fluid (ATF) components and composite friction materials and their effect on friction system performance continues to be an active area of interest to the automotive industry. A more fundamental understanding is needed of how base fluids, ATF additives, friction materials, and transmission design interact to produce the observed transmission system performance and durability. We herein report results from investigations carried out using a relatively thermo-oxidatively stable polyalphaolefin (PAO) base fluid treated with components representative of several additive types we previously reported to have significant negative effects on frictional performance. Secondly, we investigated a conventionally refined 150 N base oil treated with a calcium sulfonate detergent previously shown to improve friction performance.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

The authors provide evidence indicating that oils meeting only the minimum requirements of API GL-5 do not always provide adequate gear protection, especially in severe duty applications. Increases in commercial vehicle power and loading have accentuated the need for oils of greater load carrying ability. A modified version of the standard L-37 test may help identify oils that possess superior durability and thermal characteristics. Future gear lubricants should provide improved fuel economy, increased manual transmission life; and frictional characteristics that allow noise free performance in limited slip differentials.

Inconsistent fuel filter life is a problem that continues to plague most heavy-duty diesel fleets. It has been proven that fuel filter life can be strongly influenced by the thermal and oxidative stability of diesel fuel that is being filtered. Filters consistently exposed to diesel fuels that produce a tar-like substance in abundance upon heating (sometimes termed “asphaltenes”) will plug far more rapidly than filters exposed to diesel fuel that does not easily form these tar-like substances. Fuel additives have long been used to maintain fuel system cleanliness and to improve diesel fuel stability. It follows logically that such additives could have a positive impact on fuel filter life by maintaining the cleanliness of the fuel filtration media. This paper reviews the laboratory evaluations and field tests that were run to compare fuel filter life in both the presence and absence of diesel fuel additives.

The lubricant is a key component in the successful operation of a manual transmission, but it is important that the interactive effects with the friction material are understood. This paper examines the effect of several key additive components on the friction and wear performance of a single sinter composition in a carefully controlled laboratory test. In addition, the test method allows one to develop information about the shift behavior of the fluid-synchronizer material combination which provides useful information about shift quality. From the original experimental design program a predictive model was developed and an optimized formulation was tested as a validation of the results.

In order to assess the field needs of engine oils to be used in methanol-fueled vehicles, six oils were run in a fleet test over a ten-month period under short-trip service conditions. The results from the field test were compared with results with the six oils in the laboratory engine tests which have been used to predict field performance with methanol fuel. A lack of correlation between the field test and the laboratory engine tests suggests that the laboratory tests need revisions to better serve field needs.

Multifunctional additives can compensate for lower quality diesel fuel. Performance and quality have been decreasing worldwide. This has resulted largely from increased use of heavier crude oils and more severe processing to achieve necessary fuel product mix. Fuel additives provide the refiner and marketer with an economic approach to restoring performance and quality. Additives can be formulated to solve many problems related to deposits and wear, which are major factors affecting engine power, economy, emissions and durability. They are of critical importance to the vehicle owner/ operator to maintain dependability and low operating cost. At the same time, the refiner benefits economically through the use of lower cost crudes, greater operational flexibility and ease of adjusting final fuel blends to meet specifications. Typical additive components include: detergent dispersants, inhibitors, stabilizers, cetane improvers, and flow improvers.

Information relative to oil thickening has been developed in road tests. Typical operating temperatures, as well as the length of time required to thicken oils in these tests, are described. A laboratory test procedure has been developed that shows a good degree of correlation with this field service. The effect of test conditions such as jacket temperature and piston ring design on oil thickening in the laboratory are described.