Search Results

The functions of engine oil are reviewed. The chemistry of engine oil additives and synthetics is described in terms for the non-chemist. The latest SAE engine oil viscosity classifications and API service designations are detailed. Developments underway to upgrade engine oil quality are discussed.

Despite the many years of widespread use of the BMW Intake Valve Deposit (IVD) vehicle test, relatively little has been published quantifying the variation in the test procedure. This paper presents an analysis of the variability in the BMW test. Though results from 8045 km (8K; 5,000 mile) tests rather than 16090 km (16K; 10,000 mile) are highlighted due to the size of the available database and relative sensitivity of the data, analysis suggests that variation at 8K is representative of 16K variation. A square root transformation of average deposit weight at 8K, though more cumbersome than the more common log transformation, is found to be the most appropriate way to eliminate the dependence of variation on the absolute level of deposits. Within-car variation is found to account for over half of the test-to-test variation, contradicting the notion that car-to-car differences are the dominant source of variability.

Our basic understanding of the chemical and physical nature of soot, its interaction with lubricant components and its role in promoting wear and oil thickening in heavy duty diesel engines continues to grow. Our current study in the GM 6.5L engine focuses on examining the effects of variations in base stock type (Group I vs. Group II), viscosity index improver or viscosity modifier (VM) chemistry (OCP vs. dispersant OCP), zinc dithiophosphate (ZDP) type and dispersant type (low MW vs. high MW) on roller follower wear, viscosity growth and other measured responses. In this study, more robust fluids were tested producing very low wear results and minimal viscosity increase of the lubricant. Fluids containing dispersant OCP (DOCP) and high MW dispersant produced a lower degree of wear, whereas varying the ZDP type (1° vs. 2°) showed no effect on wear. The use of Group II base stocks was associated with significantly lower viscosity increases.

Statistically designed experiments were developed to investigate the nature of soot, to understand its role in oil viscosity growth, and to study the interactions involved with additives that inhibit viscosity growth. The matrix was designed to examine effects of engine type, mode of operation, and the oil formulations. Mack EM6-285 and GM 6.2L engines operating under both high speed and high torque conditions were used in this study. An API CE\SG quality lubricant was used as the baseline. The detergent sulfonate substrate was varied from standard to three-fold levels; the dispersant TBN contribution ranged from 1.1 to over 3.0. The surface and bulk exhaust soot properties were determined. Colloidal suspension stability and rheology were measured to evaluate the design factor effects on the formation of soot and subsequent effects on oil thickening. The Mack EM6-285 engine produced less soot, less oil viscosity growth, and less oxidation than the GM 6.2L engine.

Extended drain of axle and transmission lubricants has gained wide acceptance in both passenger car and commercial vehicle applications. Understanding how the lubricant changes during extended drain operations is crucial in determining appropriate lubricants and drain intervals for these applications. A suitable aging screen test with an established relationship to field performance is essential. Over the years numerous methods have been studied (DKA, GFC, ISOT, ASTM L-60) with varying degrees of success1,2,3. Current methods tend to be overly severe in comparison to field experience, hence the need for further work in this area. As a result of recent work, a lubricant aging test method has been developed which shows good correlation with field experience, giving us an effective tool in the development of long drain oils.

Specific frictional properties are essential to provide correct and pleasurable shifting in a manual transmission. Synchroniser rings are being manufactured from an increasingly wider range of materials, and it is important to understand synchroniser-additive interactions in order to develop tailored lubricants that provide the desired frictional performance. This paper describes a study of the interaction of various friction modifier additives with a range of synchroniser materials in order to better understand the potential to develop lubricants that provide optimal frictional performance across a wide range of manual transmission-synchroniser systems.

Specific frictional properties are essential to provide correct and pleasurable shifting in a manual transmission. Synchroniser rings are being manufactured from an increasingly wider range of materials, and so it is important to understand synchroniser-additive interactions in order to develop tailored lubricants that provide the desired frictional performance. This paper describes a study of the interaction of various friction modifier additives with a range of synchroniser materials in order to better understand the potential to develop lubricants that provide optimal frictional performance across a wide range of manual transmission-synchroniser systems. This presentation will outline the results of testing fluids with a range of synchroniser materials and will be followed by a future paper that will describe details of the fluids and analysis of their interactions with the different synchroniser surfaces.

In API engine oil licensing, candidate oils must meet the performance requirements of category defined engine tests. While API category engine tests are developed to target a theoretical performance standard, it is rare that the cost to test and approve oils is understood. Given that engine tests are an integral part of oil evaluation, understanding of engine test value is necessary. Therefore, measurements of value are presented as Unbiased Engine Test Evaluation (UETE). UETE evaluates an engine test's draw on time and money resources by estimating the average number of tests required before a candidate oil will pass the category defined engine tests. A pilot study using the API CH-4 Category is presented.

Water-emulsified diesel fuel technology has been proven to reduce nitrogen oxides (NOx) and particulate matter (PM) simultaneously at relatively low cost compared to other pollution-reducing strategies. The value of this technology is that it requires absolutely no engine adjustments or modifications to reduce harmful emissions. Technologies that break the NOx -particulate trade-off are virtually non-existent, therefore understanding how the water contained in an emulsified fuel can reduce both NOx and PM simultaneously is critical. To understand this phenomenon, emulsified fuels with varying water levels (0 to 20%) were evaluated in a multi-cylinder marine engine using three different injection timings. This testing in an actual engine confirms that as the water level is increased the amount of NOx and PM are reduced without compromising engine performance.

The intent of industry and OEM factory fill oil specifications is to ensure lubricant pumping performance at low temperatures through rheological measurements using the Mini Rotary Viscometer and Scanning Brookfield tests. Often these tests provide conflicting information, yet lubricant formulations must be optimized to meet requirements of both tests. At the root of this issue is how test information is interpreted, since ultimately it is that interpretation that influences how specifications are set. In this paper, we focus on understanding the Scanning Brookfield test's gelation index which is part of ILSAC GF-2 and GF-3 specifications; our objective is to understand what is measured and its relation to meaningful low temperature lubricant performance. We approach this objective by measuring the low temperature rheology of mineral oils and lubricants formulated from these oils.

For a diesel lubricant to meet the new Mack EO-K/2 specification, it must be effective in preventing excessive viscosity increase during the 150-hour Mack T-7 test. The severity of this test is shown to be highly dependent upon fuel chemistry and injection timing. A comparison of various lubricant formulations in the Mack T-7 engine run with a given fuel suggests that nitrogen-containing succinimide dispersants, dispersant viscosity improvers, and supplemental ash in the form of overbased sulfonate detergents are effective in controlling viscosity increase. Crankcase oil thickening follows a modified form of Brinkman’s equation and can be predicted from measured values of soot particle size and concentration. Basic lubricant additives are shown to prevent particle size growth by adsorption on to the acidic soot surface, thereby interrupting soot aggregation and retarding oil thickening.

In the first paper in this series (1)*, the extent of oil thickening for a given lubricant in the Mack T-7 engine test was found to be influenced by fuel composition. Based upon the knowledge that thickening is due to the accumulation and aggregation of soot in the oil, a set of experiments has been carried out to identify relationships between fuel chemistry and the oil thickening tendency of soot formed by fuel combustion. Three commercial diesel fuels were treated with chemical combustion aids and/or organic sulfur, and both short-duration and full-length tests were run in a Mack T-7 engine fitted with a filter designed to collect soot from the exhaust stream. A model describing the complex effects of fuel chemistry on the oil thickening process is proposed in which fuel sulfur content is shown to influence soot content of the lubricant after ISO hours of engine operation.

Piston ring land deposit formation is a key performance criterion in the ASTM Sequence IIIE engine test. Because engine testing of lubricant formulation variables is expensive, a ring land deposit bench test was developed replicating the Sequence IIIE bulk oxidation and deposit formation mechanisms. Following an initial bulk oxidation of the candidate oils, deposits similar in chemical composition and morphology to Sequence IIIE ring land deposits are produced in a modified panel coker apparatus. Good correlation with the ASTM Sequence IIIE engine test has been established. Lubricant additive and base oil effects on oxidation control and deposit formation have been investigated. Their influences on lubricant formulation strategy are discussed.

A major drive to develop methanol-fueled vehicles began with the 1973 oil embargo. Early work with dedicated methanol-fueled vehicles demonstrated that lubricant choice influenced engine durability. The qualities desired were not defined by the gasoline engine oil classification system in place at the time. As a result oils were developed which optimized those properties deemed desirable for methanol fuel. The advent of fuel sensors made it possible to design a vehicle which can operate on gasoline or gasoline with varying levels of methanol without intervention by the operator. This created a need for a lubricant that can handle a diversity of methanol/gasoline mixtures as well as conventional gasoline. The paper reviews some of the lubricants that have been used in prototype methanol-capable vehicles and the improvement of these formulations to meet the latest gasoline engine performance criteria while maintaining satisfactory methanol performance.

Water-emulsified diesel fuel technology has been proven to reduce nitrogen oxides (NOx) and particulate matter (PM) simultaneously at relatively low cost compared to other pollution-reducing strategies. While the mechanisms which result in these reductions have been postulated, the development of new analytical tools to measure in-cylinder soot formation using optically accessible engines can lead to a deeper understanding of combustion and the chemical and physical mechanisms when water is present during combustion. In this study, an optically accessible single cylinder engine was used to study how water brought into the combustion chamber via an emulsified fuel changes the combustion process and thereby reduces emissions. In-cylinder measurements of relative soot concentrations were used to determine the effect of water-emulsified fuel on soot formation.

Classical journal bearing equations predict the function of oil flow in dissipating heat, thereby governing the effective viscosity of the lubricant in bearings. From this perspective, experimental dynamometer tests explored low speed, high load, high temperature, operation of four low viscosity oils. Test length was 48 hours using a 3.8L V-6 engine under steady state and cyclic conditions. With a 1.4 cP HTHSR viscosity oil the bearing distress appeared dependent on connecting rod bearing clearances serving to govern rate of oil flow through the main bearings. Front and rear main bearings exhibited severe overheat-distress. This was related to the design of the oil distribution system in the crankshaft. A severe cyclic acceleration test showed little bearing distress. Significant distress occurred only with an SAE 5W viscosity grade. SAE 5W-30 and 5W-40 multigrades showed no abnormal wear. Results were interpreted in terms of high temperature, high shear rate rheology of the test oils.

The lubricant is a key component in the successful operation of a manual transmission, but it is important that the interactive effects with the friction material are understood. This paper examines the effect of several key additive components on the friction and wear performance of a single sinter composition in a carefully controlled laboratory test. In addition, the test method allows one to develop information about the shift behavior of the fluid-synchronizer material combination which provides useful information about shift quality. From the original experimental design program a predictive model was developed and an optimized formulation was tested as a validation of the results.

This paper is part one of a longer term comparison of viscosity modifier behavior in modern automotive gear oil (AGO) fluids and the impact of these properties on fluid efficiency and durability. This first installment will compare the rheological properties, including EHD film thickness and traction coefficients, of the fluids across broad operating temperature, shear and load regimes and correlate these findings with rig efficiency testing. The effects of traction, EHD film thickness and high shear rheology on operating temperature are well documented and it is of particular interest to determine the extent to which different viscosity modifiers can beneficially impact these properties compared to a Brightstock-based SAE 80W90 grade fluid. The efficiency improvements of a VM would be for naught if it were not sufficiently shear stable and so comparisons are made between shear stable VM technologies.

The authors provide evidence indicating that oils meeting only the minimum requirements of API GL-5 do not always provide adequate gear protection, especially in severe duty applications. Increases in commercial vehicle power and loading have accentuated the need for oils of greater load carrying ability. A modified version of the standard L-37 test may help identify oils that possess superior durability and thermal characteristics. Future gear lubricants should provide improved fuel economy, increased manual transmission life; and frictional characteristics that allow noise free performance in limited slip differentials.

This paper provides an overview of gear lubrication related to automotive equipment. A brief background in various aspects of lubrication, including lubrication theory, lubricant evaluation, performance designations, and formulation technology, is presented. This information is designed to assist those involved in the selection of automotive gear lubricants.