Refine Your Search

Topic

Search Results

Viewing 1 to 18 of 18
Standard

Self-Displacing Hydraulic Accumulator

2018-09-04
CURRENT
ARP4553B
This SAE Aerospace Recommended Practice (ARP) provides recommendations for design and test requirements for self-displacing hydraulic accumulators.
Standard

PROCEDURE FOR INSPECTION OF INSERVICE AIRBORNE ACCUMULATORS FOR CORROSION AND DAMAGE

1996-11-01
CURRENT
ARP4150
This SAE Aerospace Recommended Practice (ARP) is intended as a guide in establishing inspection procedures to determine the condition of inservice accumulators. A minimum inspection program is recommended to determine the existence of corrosion and damage. Recommendations are also provided for corrective action if it is determined that the environment is contributing to the deterioration of the surface protection system treatments.
Standard

Motors, Aircraft Hydraulic, Constant Displacement General Specification For

1999-04-01
HISTORICAL
AS7997
This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.
Standard

Motors, Aircraft Hydraulic, Constant Displacement General Specification For

2018-08-15
CURRENT
AS7997A
This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.
Standard

Compressor Units, Air/Gas, General Requirements For

2001-03-01
HISTORICAL
AS26805
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Compressor Units, Air/Gas, General Requirements For

2008-04-09
HISTORICAL
AS26805A
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Compressor Units, Air/Gas, General Requirements For

2013-06-13
CURRENT
AS26805B
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components

2014-04-24
CURRENT
ARP4904A
This SAE Aerospace Recommended Practice (ARP) establishes software capability guidelines for computer controlled test equipment, hereinafter referred to as automatic test equipment (ATE), for testing hydraulic components. A typical ATE system is shown in Figure 1. The items herein have been selected as potential features which may or may not be applicable to a particular application. This document does not address software development requirements, qualification procedures, or hardware design requirements, but encourages users to refer to existing documents, defined in 2.1.1, for guidance on such issues.
Standard

Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components

1994-09-01
HISTORICAL
ARP4904
This SAE Aerospace Recommended Practice (ARP) establishes software capability guidelines for computer controlled test equipment, hereinafter referred to as automatic test equipment (ATE), for testing hydraulic components. A typical ATE system is shown in Figure 1. The items herein have been selected as potential features which may or may not be applicable to a particular application. This document does not address software development requirements, qualification procedures, or hardware design requirements, but encourages users to refer to existing documents, defined in 2.1.1, for guidance on such issues.
Standard

Aerospace - Accumulator, Hydraulic, Self-Displacing

2008-12-19
HISTORICAL
ARP4553A
This SAE Aerospace Recommended Practice (ARP) is intended to provide design and qualification requirements for self-displacing hydraulic accumulators. These requirements are intended be included in the Procurement Specification for the accumulator. Those requirements identified by the use of “shall” are considered to be essential requirements; those requirements identified by the use of “should” are considered to be optional requirements for inclusion in the Specification at the discretion of the Purchaser. In addition, test methods for production acceptance and qualification purposes are provided.
Standard

Aerospace - Accumulator, Hydraulic, Cylindrical, Piston Separated

2016-04-20
CURRENT
ARP4379B
This SAE Aerospace Recommended Practice (ARP) is a guide for defining the requirements for aerospace piston hydraulic accumulators, including details pertinent to the design, fabrication, performance and testing of the accumulator. This type of accumulator contains a piston which separates pressurized gas and fluid.
Standard

Aerospace - Accumulator, Hydraulic, Cylindrical, Piston Separated

2007-11-20
HISTORICAL
ARP4379A
This SAE Aerospace Recommended Practice (ARP) is intended as a guide in defining the requirements for aerospace piston separated hydraulic accumulators, including details pertinent to the design, fabrication, and performance of the accumulator. This type of accumulator has a piston separator and contains both high-pressure gas and fluid. The accumulator is used in aerospace hydraulic systems of the following types as defined in AS5440 with design operating pressures of up to 8000 psi (55,160 kPa). Type I: -65 to +160 °F (-54 to +71 °C) fluid temperature Type II: -65 to +275 °F (-54 to +135 °C) fluid temperature For commercial aerospace or helicopter applications, the information and guidelines of ARP4752 or ARP4925 respectively, are considered.
Standard

Accumulators, Hydraulic, Cylindrical, Aircraft, Maintenance Free, Factory Precharged

1997-10-01
HISTORICAL
ARP4378
This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for the design, construction, testing and performance of aerospace, maintenance free, factory pre-charged hydraulic accumulators. The accumulators are designed for use in aircraft hydraulic systems at maximum rated operating pressures up to 8000 psi (55158 KPa). The temperature range of the accumulator is -65 to 275 °F (-54 to 135 °C).
Standard

Accumulators, Ground, Hydropneumatic Pressure

2012-07-11
CURRENT
ARP763A
This specification covers ground type hydropneumatic pressure accumulators for use in ground support hydraulic systems at rated pressures ranging up to 5,000 psi including details pertinent to the design, fabrication, and performance of the accumulators.
Standard

Accumulators, Ground, Hydropneumatic Pressure

1962-10-15
HISTORICAL
ARP763
This specification covers ground type hydropneumatic pressure accumulators for use in ground support hydraulic systems at rated pressures ranging up to 5,000 psi including details pertinent to the design, fabrication, and performance of the accumulators.
X