Refine Your Search

Date

Date

Topic

Topic

Joining Metals A-6C4 Power Sources Committee Metallurgy Quality control Identification

Search Results

Viewing 1 to 20 of 30
12Next >Last >>
Sort by title
Standard

Self-Displacing Hydraulic Accumulator
2018-09-04
CURRENT
ARP4553B
This SAE Aerospace Recommended Practice (ARP) provides recommendations for design and test requirements for self-displacing hydraulic accumulators.
Standard

Pumps, Hydraulic, Variable Flow, General Specification For
1999-07-01
HISTORICAL
AS19692A
This specification and a detail pump specification establish the requirements for variable flow hydraulic pumps, for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891, as applicable. The general requirements for type I and type II hydraulic systems pumps are specified in MIL-H-8775 and for type III system pumps in MIL-H-8890.
Standard

Procedure for Inspection of In-Service Airborne Accumulators for Corrosion and Damage
2019-11-12
CURRENT
ARP4150A
This SAE Aerospace Recommended Practice (ARP) is a guide in establishing inspection procedures to determine the condition of in-service accumulators. Recommendations are also provided for corrective action if it is determined that the environment is contributing to the deterioration of the surface protection system treatments.
Standard

PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR
1998-05-01
HISTORICAL
AS19692
This specification and a detail pump specification establish the requirements for variable flow hydraulic pumps, for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891, as applicable. The general requirements for type I and type II hydraulic systems pumps are specified in MIL-H-8775 and for type III system pumps in MIL-H-8890.
Standard

PROCEDURE FOR INSPECTION OF INSERVICE AIRBORNE ACCUMULATORS FOR CORROSION AND DAMAGE
2011-03-18
HISTORICAL
ARP4150
This SAE Aerospace Recommended Practice (ARP) is intended as a guide in establishing inspection procedures to determine the condition of inservice accumulators. A minimum inspection program is recommended to determine the existence of corrosion and damage. Recommendations are also provided for corrective action if it is determined that the environment is contributing to the deterioration of the surface protection system treatments.
Standard

Motors, Aircraft Hydraulic, Constant Displacement General Specification For
1999-04-01
HISTORICAL
AS7997
This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.
Standard

Motors, Aircraft Hydraulic, Constant Displacement General Specification For
2018-08-15
CURRENT
AS7997A
This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.
Standard

Gas Motor
2007-11-06
HISTORICAL
ARP719A
It is intended that this SAE Aerospace Recommended Practice (ARP) will set down guidelines for the development and test of gas motors to provide a practical and reliable hot gas rotary actuation mechanism. Specific operational and test requirements shall be specified in a detail specification.
Standard

Gas Motor
2013-06-17
CURRENT
ARP719B
It is intended that this SAE Aerospace Recommended Practice (ARP) will set down guidelines for the development and test of gas motors to provide a practical and reliable hot gas rotary actuation mechanism. Specific operational and test requirements shall be specified in a detail specification.
Standard

GAS MOTOR
1961-12-31
HISTORICAL
ARP719
Gas for the purpose of this ARP shall be defined as the gaseous produces) resulting from the decomposition, dissociation, or combustion of liquid or solid mono or bi-propellants. Where other gases such as heated N2, H2, H2O (steam), etc., which may have similar physical and/or chemical properties as the defined "gas", are used to effect testing economies; they may be considered as being included in this ARP.
Standard

Compressor Units, Air/Gas, General Requirements For
2008-04-09
HISTORICAL
AS26805A
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Compressor Units, Air/Gas, General Requirements For
2001-03-01
HISTORICAL
AS26805
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Compressor Units, Air/Gas, General Requirements For
2013-06-13
CURRENT
AS26805B
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard

Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
2008-07-17
HISTORICAL
ARP4904
This SAE Aerospace Recommended Practice (ARP) establishes software capability guidelines for computer controlled test equipment, hereinafter referred to as automatic test equipment (ATE), for testing hydraulic components. A typical ATE system is shown in Figure 1. The items herein have been selected as potential features which may or may not be applicable to a particular application. This document does not address software development requirements, qualification procedures, or hardware design requirements, but encourages users to refer to existing documents, defined in 2.1.1, for guidance on such issues.
Standard

Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
2014-04-24
CURRENT
ARP4904A
This SAE Aerospace Recommended Practice (ARP) establishes software capability guidelines for computer controlled test equipment, hereinafter referred to as automatic test equipment (ATE), for testing hydraulic components. A typical ATE system is shown in Figure 1. The items herein have been selected as potential features which may or may not be applicable to a particular application. This document does not address software development requirements, qualification procedures, or hardware design requirements, but encourages users to refer to existing documents, defined in 2.1.1, for guidance on such issues.
Standard

Aircraft Hydraulic Starter/Pumps
2013-10-28
CURRENT
AS838A
This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.
Standard

Aircraft Hydraulic Starter/Pumps
2005-04-26
HISTORICAL
AS838
This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.
Standard

Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump
2022-05-18
WIP
AS19692C
This SAE Aerospace Standard (AS) establishes the general requirements for the design, construction, acceptance, and qualification testing of flat cut-off pressure compensated, variable delivery hydraulic pumps used in military aircraft hydraulic systems. It also provides parameters for a Procurement Specification to be used in conjunction with this AS. The hydraulic pumps defined by this AS are generally for use in aircraft hydraulic systems conforming to and as defined in AS5440 and MIL-H-8891, as applicable. NOTES: 1. Hydraulic pumps may incorporate features such as a clutch in the input drive, which will not be covered by this standard. 2. AS595 should be used for commercial aircraft hydraulic pumps. 3. This document should not be used for hydraulic pumps in Electro-Hydrostatic Actuator applications (EHAs).
12Next >Last >>
X